Cooper Lighting L994, L946, L947, L949, L951 User Manual

HALO

TRACK LIGHTING Two Circuit

®

L942 Flex Joiner

To connect two track sections at any angle up
to 90,° in either plane or wall to ceiling or
pitched ceiling applications.

Finish: White (P), Black (MB)

L945R Right T Connector

“T” connector for joining three trac sections
with right hand polarity. May be used as feed
point.

Finish: White (P), Black (MB)

L946 X Connector

To connect four track section into a cross
configuration. May be used for feed point.

Finish: White (P), Black (MB)

L949 Mini Joiner

To join two straight track sections end-to-end.
Not a feed point.

Finish: White (P), Black (MB)

L943 Straight/L Connector

To connect two track sections end-to-end or at
a 90° angle. May be used as feed point.

Finish: White (P), Black (MB)

L945L Left T Connector

“T” connector for joining three trac sections
with left hand polarity. May be used as feed
point.

Finish: White (P), Black (MB)

L947 Conduit Connector

A live end connector for use with surface
conduit. Designed to accept standard 1/2”
conduit fitting (not included). May be used for
feed point.

Finish: White (P), Black (MB)

L951 Wire Way Cover for

For track to be wired through stem (one for
each live end used). Shown with end feed and
pendant stem kit–order separately

Finish: White (P), Black (MB)

Pendant Assembly Kit

L983 T-Bar Attachment Clip

Allows track to be attached to inverted tee
ceiling. Order as follows: 2 kits for 2’ Trac; 2
kits for 4’ Trac; 3 kits for 8’ Trac; and 4 kits for
12’ Trac.

L986 T-Bar Attachment Clip

For mounting track on suspended ceilings with
mini-grid (9/16" wide) system.

L929 Floating Canopy and

Connector

Can be connected anywhere along length of
Trac. Comes with canopy cover, connector,
dead-end and mounting hardware.

Finish: White (P), Black (MB)

L994 45° Pendant Adapter

For installing pendant mounted Power-Trac on
sloped ceiling. For use with L992 and L993.

Finish: White (P), Black (MB)

L989 Conduit Continuation Kit

Includes one left and one right feed. To
continue
a run around obstructions with 1/2” trade size
surface conduit.

Finish: White (P), Black (MB)

L992 Pendant Kit Assembly

To suspend track from ceiling. Order as
follows: 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3
kits for 8’ Trac; and 4 kits for 12’ Trac. Includes
one 18” threaded steel stem, canopy and
mounting hardware.

Finish: White (P), Black (MB)

L48 48” Steel Stem

For additional length of stem for L992. Can be
field cut and threaded.

DE641 Dead End

Replacement Dead Ends for Two Circuit Track
(6 included)

Finish: White (P), Black (MB)

COOPER LIGHTING

313