Cooper Lighting L981, L993, L913, L915L, L915R User Manual

HALO

TRACK LIGHTING Raceway

®

L900 Outlet Box Cover

Can be used at any electrical feed connection
point (Live, Straight, L, T or X). Size: 5” sq.
Screws included.

Finishes: White (P), Black (MB)

L913 Straight Connector

To connect two track sections end-to-end. May
be used as feed point.

Finishes: White (P), Black (MB)

L914L L Connector

To connect two track sections at left-hand
90° angle. Outside ground. May be used as feed
point.

Finishes: White (P), Black (MB)

L915L T Connector

To connect three track sections into a left-hand T
configuration. Grounds matched to L915R for
grid system. May be used as feed point.

Finishes: White (P), Black (MB)

L911 Live End Connector

To start a run.

Finishes: White (P), Black (MB)

L914R L Connector

To connect two track sections at a right-hand
90° angle. Inside ground. May be used as
feed point.

Finishes: White (P), Black (MB)

L915R T Connector

To connect three track sections into a right-hand
T configuration. Grounds matched to L915L for
grid system. May be used as feed point.

Finishes: White (P), Black (MB)

L916 X Connector

To connect four track sections into a cross
configuration. May be used as feed point.

Finishes: White (P), Black (MB)

L981 Conduit Adapter

Designed to accept standard 1/2” trade size
conduit fitting (not supplied). Use when feeding
to surface mount Raceway trac through surface
conduit system.

Finishes: White (P), Black (MB)

L994 45° Pendant Adapter

For installing pendant mounted Power-Trac on
sloped ceiling. For use with L992 and L993.

Finishes: White (P), Black (MB)

L984 T-Bar Attachment Clip

Allows surface mount Raceway Trac to be
attached to inverted tee ceiling. Order as follows:
2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac
and 4 kits for 12’ Trac.

L993 Pendant Kit Assembly

To suspend track from ceiling. Order as follows: 2
kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac;
and 4 kits for 12’ Trac. Includes one 18” threaded
steel stem, canopy and mounting hardware.

Finishes: White (P), Black (MB)

L48 48” Steel Stem

L993 can be field cut and threaded.

Finishes: White (P), Black (MB)

DE611 Dead End

Replacement Dead Ends for Raceway Track (6
included)

Finishes: White (P), Black (MB)

COOPER LIGHTING

315