Cooper Lighting L650, L652, L651, L653 User Manual

HALO

Feed Point A Feed Point B Feed Point C

®

TRACK LIGHTING Single Circuit

L650, L651, L652, L653

• L650–2’ Track. Actual length 20 1/8”(511mm).
Finishes: White (P), Black (MB), Bronze( BZ),
Antique Brass (AB), Polished Brass (B), Silver (SL)

• L651–4’ Track. Actual length 44 1/8”(1121mm).
Finishes: White (P), Black (MB), Bronze( BZ),
Antique Brass (AB), Polished Brass (B), Silver (SL)

• L652–8’ Track. Actual length 92 1/8”(2340mm).
Finishes: White (P), Black (MB), Bronze( BZ),
Antique Brass (AB), Polished Brass (B), Silver (SL)

• L653–12’ Track. Actual length 140 1/8”(3559mm).
Finishes: White (P), Black (MB), Silver (SL)

MINIATURE

Miniature Trac Provides Versatility
for Every Lighting Need

Miniature size, decorator finishes, push­in connectors, economy, all combine to
make single-circuit Miniature Trac perfect
for residential or commercial use.

Size

Miniature Trac is only 11/16” (17.5mm)
deep by 1 3/8” (35mm) wide.

Finishes

Miniature Trac is available in six finishes
to meet any decorating need: White,
Matte Black, Antique Brass, Polished
Brass, Bronze and Silver.

Connectors

Connectors simply push into the ends of
the Trac, eliminating splicing. L’s, T’s, X’s
and the Flexible Connector allow track to
be assembled in almost any pattern.

Grounding

To ensure safe operation the entire track
system is fully polarized and grounded.
Grounding is accomplished
automatically by a separate solid copper
ground conductor in the track. The
ground conductor maintains continuity
to the building’s grounding system
through the ground contact fingers in
each of the connectors.

Specifications

The structural channel is extruded
aluminum with .060” nominal wall
thickness. Conductors are solid copper
buss bars encased in rigid extruded PVC
insulators. Polarized connectors and end
caps are molded polycarbonate.
Electrical capacity is 20 AMPS. Halo
Miniature Trac is UL listed, CSA certified.

Polarity

A visual polarity line on Power-Trac units
indicates proper electrical installation.
Simply line up polarity on Power-Trac
and lampholder adapter.

WIRING DETAILS

This single circuit, low-profile Trac is ideal for applications
where there is need for one lighting circuit.

ACCESSORIES

L900 Outlet Box Cover

Can be used at any electrical feed connection
point (Live, Straight, L, T or X). Size: 5” sq.
Screws included.

Finish: White (P), Black (MB)

L902 Flexible Connector

To connect two track sections at any angle up to
90° in either plane or wall to ceiling or pitched
ceiling applications.

Finish: White (P), Black (MB)

Should more circuit control be required, switched feed
points can be made at additional connectors.

L901 Live End Connector

To start a run.

Finish: White (P), Black (MB)

L903 Straight Connector

To connect two track sections end-to-end.
L903 differs from mini connector L908 in
that it provides a center feed option and is
longer. May be used as feed point.

Finish: White (P), Black (MB)

COOPER LIGHTING

310