Cooper Lighting L643, L642, L641 User Manual

DESCRIPTION

A. Structural

Extruded aluminum .060"
[1.5mm] nominal wall thickness.
Halo-2 Power-Trac is 11/16”
(17.5mm) deep by 1 3/8” (35mm)
wide. Same as Halo Miniature
Trac.

B. Line Conductors

Solid copper buss bars [cross
section equivalent to #12 AWG
wire.

encased in rigid extruded

PVC insulators.

C. Insulating Liner

Rigid extruded polyvinyl
insulators.

D. Ground Conductor

Exclusive independent

grounding buss conductor.
Maintains an independent
positive ground #12 AWG path
between lampholder, Trac
channel and building’s ground
system.

E. Neutral Conductor

Cross section equivalent of #12
AWG wire.

F. Polarity Indicator (Neutral)

Visual polarity groove indicates
proper electrical installation of
lampholder adapter. All Halo-2
Power-Trac is shipped from the
factory with a “LEFT” dead end
installed. The L941 Live End
Connector is designed to attach
to the right hand side of the track.

Locate small polarity indicator on
the connector and align with
polarity groove on track.

Listing

Halo-2 Trac is UL listed and CSA
certified for use with Halo and
Lazer-by-Halo lampholders.

SPECIFICATION FEATURES

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each
circuit can be independently switched. Provides maximum flexibility, with
a miniature profile. Suitable for a wide range of commercial,
merchandising and residential applications. Electrical capacity is 20
AMPS per circuit when properly balanced. Installing lampholders is
simple. An adjustable contact allows selection of the circuit position. Lift
or lower the contact until it touches the plastic stop of the assembly. For
circuit #1 move contact to the down position. For circuit #2 move contact
to the up position. Halo 2-Circuit Track accepts both Halo and Lazer-by­Halo lampholders.

A

B

B

D

E

C

F

(See Below)P=Satin White
MB=Matte Black
SL=Silver

ORDERING INFORMATION

SAMPLE NUMBER: 641MB

L641=4'
L642=8'
L643=12'

AccessoriesFinishesTrac

L641

L =4'. Actual length
42 5/8" [1083mm]
W =1 3/8" [35mm]
H =11/16" [17.5mm]

Color codes

P = White
MB = Black
SL = Silver

L642

L =8'. Actual length
90 5/8" [2302mm]
W =1 3/8" [35mm]
H =11/16" [17.5mm]

Color codes

P = White
MB = Black
SL = Silver

L643

L =12'. Actual length
138 5/8" [3521mm]
W =1 3/8" [35mm]
H =11/16" [17.5mm]

Color codes

P = White
MB = Black
SL = Silver

Y

H

W

Connectors

L900 Outlet Box Cover
L941 Live End connector
L942 Flexible Connector
L943 Straight/“L” Connector
L945 “T” Connector
L946 “X” Connector
L949 Mini Joiner
L947 Conduit Connector
L989 Conduit Continuation Kit
L980 Live End Conduit

Adapter

Accessories

L951 Wire Way Cover for

Pendant Assembly Kit
L983 T-Bar Attachment Clip
L992 Pendant Kit assembly
L18 18” Steel Stem
L36 36” Steel Stem
L48 48” Steel Stem
L994 Pendant Adapter
DE641 Dead End

L641

L642

L643

L641, L642, L643

MINIATURE

TWO CIRCUIT

TRAC SYSTEM

Power-Trac

HALO

®

HALO

®

ADV042180

Supersedes ADV021435 & ADV990381

9/04

TAB: Track Systems

Sheet 4

Note: Specifications and Dimensions subject to change without notice.

Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]

Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]

Catalog #

Project

Comments

Prepared by

Type

Date

HALO

®

DESCRIPTION

Polarity Indicators

Neutral is indicated on two circuit power track by the groove placed along the flange of the track. The connectors
show neutral polarity by the arrow on the end of the connector. The left handed T connector, L945L has an arrow
facing left when the crossbar of the T is at the bottom, and “Halo-2” is right-reading. The L945R, a right handed T
connector has the arrow facing right when the crossbar of the T is at the bottom, and “Halo-2” is right-reading.

Polarity
Groove

Polarity
Groove

Polarity
Groove

Polarity
Arrows

Polarity
Arrow

Polarity
Arrows

Left T

Right T

Track

Track Track

L945L

L945RL941

L942

L941

L900

L641, L642, L643

CONNECTORS

AND

ACCESSORIES

Sheet A

L900 Outlet Box Cover

Can be used at any electrical feed connection point (Live,
Straight, L, T or X). Drill guides on back for virtually all
standard outlet boxes. Size: 5” sq. Screws included.

Color codes: P (White), MB (Black)

L941 Live End Connector

To start a run. Right hand polarity.
(Left hand polarity live end connector available.
Consult factory).

Color codes: P (White), MB (Black)

L942 Flex Joiner

To connect two track sections at any angle up to
90,° in either plane or wall to ceiling or pitched
ceiling applications.

Color codes: P (White), MB (Black)

ORDERING INFORMATION

L900

Connector

Finish

ORDERING INFORMATION

L941

Connector

Finish

ORDERING INFORMATION

L942

Connector

Finish

5 1/2"

(140mm)

3 3/8"

(86mm)

6 5/8"

(169mm)

1 3/8

"

(35mm)

4 1/2"

(115mm)

3 3/8

"

(86mm)

11/16"

(17mm)

1 1/4

"

(32mm)

1 1/4"

(32mm)

5

"

(127mm)

5"

(127mm)

3/32

"

(2.4mm)

Note: Specifications and Dimensions subject to change without notice.

Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]

Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]

HALO

®

Note: Specifications and Dimensions subject to change without notice.

Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]

Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]

L943

L943 Straight/L Connector

To connect two track sections end-to-end or at a
90° angle. May be used as feed point.

Color codes: P (White), MB (Black)

ORDERING INFORMATION

L943

Connector

Finish

5 3/8

"

(137mm)

7 5/8"

(194mm)

2 3/8

"

(2.375)

3 1/2"

(89mm)

2 3/8"

(60mm)

3 1/2"

(89mm)

L945R

L945L

ORDERING INFORMATION

L945R

Connector

Finish

ORDERING INFORMATION

L945L

Connector

Finish

5 3/8

"

(137mm)

7 5/8"

(194mm)

L945R Right T Connector

“T” connector for joining three trac sections with
right hand polarity. May be used as feed point.

Color codes: P (White), MB (Black)

L945L Left T Connector

“T” connector for joining three trac sections with
left hand polarity. May be used as feed point.

Color codes: P (White), MB (Black)

L946 X Connector

To connect four track section into a cross
configuration. May be used for feed point.

Color codes: P (White), MB (Black)

L947 Conduit Connector

A live end connector for use with surface conduit.
Designed to accept standard 1/2” conduit fitting
(not included). May be used for feed point.

Color codes: P (White), MB (Black)

L946

ORDERING INFORMATION

L946

Connector

Finish

L947

ORDERING INFORMATION

L947

Connector

Finish

1 3/8"

(35mm)

1 3/8"

(35mm)

1 1/2"

(38mm)

4 7/8"

(124mm)

5 3/8

"

(137mm)

7 5/8"

(194mm)

5 3/8

"

(137mm)

7 5/8"

(194mm)

HALO

®

Note: Specifications and Dimensions subject to change without notice.

Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]

Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]

L949

ORDERING INFORMATION

L949

Connector

Finish

2 1/2"

(64mm)

951

ORDERING INFORMATION

L951

Connector

Finish

1 3/8"

(1.375)

8 1/8"

(207mm)

3/16"

(2.8mm)

15/16"

(24mm)

Track

13/16"

(21mm)

L901, L902, L903,
L904, L905 or L906

Stem

L951 Cover

L949 Mini Joiner

To join two straight track sections end-to-end.
Not a feed point.

Color codes: P (White), MB (Black)

L951 Wire Way Cover for Pendant Assembly Kit

For track to be wired through stem (one for
each live end used). Shown with end feed and pendant
stem kit–order separately

Color codes: P (White), MB (Black)

L983 T-Bar Attachment Clip

Allows track to be attached to inverted tee ceiling. Order as follows:
2 kits for 4’ Trac; 3 kits for 8’ Trac and 4 kits for 12’ Trac.

L986 Mini-T Bar Clip

For mounting Trac on suspended ceilings with mini-grid (9/16” wide)
system.

L989 Conduit Continuation Kit

Includes one left and one right feed. To
continue a run around obstructions
with 1/2” trade size surface conduit.

Color codes: P (White), MB (Black)

L983

1 1/2"

(38mm)

13/16"

(21mm)

1 1/16"

(27mm)

ORDERING INFORMATION

L98_

Connector

L989

ORDERING INFORMATION

L989

Connector

Finish

1 3/8"

(35mm)

1 3/8"

(35mm)

1 1/2"

(38mm)

4 7/8"

(124mm)

DESCRIPTION

HALO

®

Note: Specifications and Dimensions subject to change without notice.

Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]

Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]

ORDERING INFORMATION

L909

Connector

Finish

4 1/4

"

(108mm)

4 1/4"

(108mm)

1 3/8"

(35mm)

3 1/4"

(83mm)

1/4"

(6.4mm)

L929

L992

L994

DESCRIPTION

ORDERING INFORMATION

L992

Connector

Finish

ORDERING INFORMATION

L994

Connector

Finish

18"

458mm

5"

(127mm)

2 5/8"

(69mm)

5 7/8"

(150mm)

1 7/8"

(48mm)

1 5/16"

33mm

1"

(25mm)

13/16"

(21mm)

L929 Floating Canopy and Connector

Can be connected anywhere along length of Trac.
Comes with canopy cover, connector, dead-end and
mounting hardware.

Color codes: P (White), MB (Black)

L992 Pendant Kit Assembly

To suspend track from ceiling. Order as follows:
2 kits for 4’ Trac; 3 kits for 8’ Trac; and 4 kits for
12’ Trac. Includes one 18” threaded steel stem,
canopy and mounting hardware.

Color codes: P (White), MB (Black)

L48 48” Steel Stem

For additional length of stem for L992. Can be
field cut and threaded.
Color codes: P (White), MB (Black)

L994 Pendant Adapter

For installing pendant mounted Power-Trac on
sloped ceiling. For use with L992.

Color codes: P (White), MB (Black)