Cooper Lighting Invue 42 - 175W User Manual
INVUE
19 19/32" [497mm] 15 11/16" [298mm]
5 5/16"
[135mm]
6 3/4" [171mm]
AREA ROADWAY
AES
ASCENT SITE
SMALL
TM
DESCRIPTION
ASCENT enhances the rectilinear
form with a housing that blends
effortlessly to traditional or
ambitious architectural
environments. ASCENT brings
two (2) housing sizes and a fluid
form to match the culture in
which it resides.
EPA-Effective Projected Area: .85
DIMENSIONS
42-175W
Metal Halide
High Pressure Sodium
Compact Fluorescent
ARCHITECTURAL
AREA LUMINAIRE
• Two-piece heavy-wall,
die-cast aluminum
housing
• Continuous silicone
gasketing provides IP66
fixture rating
• Impact resistant 1/8" thick
tempered clear or
optional frosted flat glass
• Toolless entry to housing
is provided via two (2)
flush mounted quick
release latches
• Ballast and related
electrical components are
mounted to a reinforced
one-piece die-cast
aluminum power tray
• Choice of five (5) high
efficiency segmented
optical systems
constructed of premium
95% reflective anodized
aluminum sheet
ORDERING INFORMATION
SAMPLE NUMBER: AES-175-MH-MT-3S-BK-L
4
12
Lamp Type
MH=Metal
Halide
HPS=High
Pressure
Sodium
CF=Compact
Fluorescent
3
Accessories
OA/RA1016=NEMA Photocontrol—Multi-Tap
OA/RA1027=NEMA Photocontrol—480V
OA/RA1201=NEMA Photocontrol—347V
VA1047-XX=Direct Wall Mount Kit
VA1048-XX=Wall Mount Kit with 6 3/4" Arm
VA1051-XX=6 3/4" Arm for Square Pole
VA1053-XX=6 3/4" Arm for Round Pole
VA1017-XX=Mast Arm Adapter Kit
VA1019-XX=Single Arm Tenon Adapter for 2 3/8" O.D. Tenon
VA1020-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
VA1021-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
VA1022-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
VA1023-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
VA1024-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
VA1025-XX=2 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
VA1026-XX=Single Arm Tenon Adapter for 3 1/2" O.D. Tenon
VA1027-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
VA1028-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
VA1029-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
VA1030-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
VA1031-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
VA1032-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
12
Lamp
Wattage
HID
70=70W
100=100W
150=150W
175=175W
Compact
Fluorescent
42=42W
57=57W
12
13
2
Product
1
Family
AES=ASCENT
Site Small
11
Options
F=Single Fuse (120, 277 or 347V)
Specify Voltage
FF=Double Fuse (208, 240 or 480V)
Specify Voltage
Q=Quartz Restrike
EM=Quartz Restrike with Time Delay
(Also Strikes at Cold Start)
EM/SC=Quartz Emergency Separate
Circuit
R=NEMA Twistlock Photocell Receptacle
PC=Button Type Photocontrol
(Specify Voltage)
HS=House Side Shield
VS=Polycarbonate Vandal Shield
FR=Frosted Flat Glass Lens
L=Lamp Included
6
Voltage
120=120V
208=208V
240=240V
277=277V
347=347V
480=480V
5
DT=Dual-Tap
Wired 277V
MT=Multi-Tap
Wired 277V
TT=Triple-Tap
Wired 347V
UNV=120-277V Universal
14
9
Electronic Ballast
Optical System
2S=Type II
3S=Type III
4S=Type IV
5S=Type V
SL=Spill Light
Eliminator
7
8
15
Colors
(add as suffix/must
specify)
BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite Metallic
15
10
Options &
Accessories
(See Below)
• Medium-base porcelain
socket for HID lamp
sources
• Housing and arm finished
in a 5 stage premium
TGIC polyester powder
coat paint
• Approximate net weight:
35 lbs. (16 kgs.)
1088
COOPER LIGHTING
AES
WATTAGE TABLE
Metal Halide 70, 100, 175W
High Pressure Sodium 70, 100, 150W
NOTES: 1 Arm not included. See accessories. 2 All HID lamps are medium-base. 3 Available in Type 3S, 4S, and 5S distributions only. 4 Nominal M.O.L lamp length of
57W CFL not to exceed 7". 5 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V.
Specify with UNV voltage designation. 6 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and
ordering information. 7 Dual-tap is 120/277V wired 277V. 8 Multi-tap is 120/208/240/277V wired 277V. 9 Triple-tap is 120/277/347V wired 347V. 10 Custom and RAL
color matching available upon request. Consult your INVUE Lighting Systems Representative for further information. 11 Add as suffix in the order shown.
12 Quartz options not available with SL optic. 13 House side shield not available on 5S and SL optics. 14 Order separately, replace XX with color suffix. 15 For use
in down lighting applications only. 16 Specifications and dimensions subject to change without notice.
Compact Fluorescent 42, 57W
DIMENSIONS
25 9/32" [642mm] 21 3/16" [537mm]
7 1/16"
[179mm]
6 1/2" [166mm]
or
9" [229mm]
EPA-Effective Projected Area: 1.35
DESCRIPTION
ASCENT enhances the rectilinear
form with a housing that blends
effortlessly to traditional or
ambitious architectural
environments. ASCENT brings
two (2) housing sizes and a fluid
form to match the culture in
which it resides.
INVUE
TM
AEM
ASCENT SITE
MEDIUM
AREA ROADWAY
AREA ROADWAY
ORDERING INFORMATION
SAMPLE NUMBER: AEM-400-MH-MT-3S-BK-L
Product
1
Family
AEM=ASCENT
Site
Medium
12
Options
F=Single Fuse (120, 277 or 347V)
Specify Voltage
FF=Double Fuse (208, 240 or 480V)
Specify Voltage
Q=Quartz Restrike
EM=Quartz Restrike with Time Delay
(Also Strikes at Cold Start)
EM/SC=Quartz Emergency Separate
Circuit
R=NEMA Twistlock Photocell Receptacle
PC=Button Type Photocontrol
(Specify Voltage)
DS=Dual Fluorescent Switching Control
HS=House Side Shield
FR=Frosted Flat Glass Lens
L=Lamp Included
WATTAGE TABLE
AEM
Metal Halide 175, 250, 400W
Pulse Start Metal Halide 250, 320, 350, 400W
High Pressure Sodium 150, 250, 400W
Compact Fluorescent (2) 57, (2) 60, (2) 70, (2) 85, (2) 120W
NOTES: 1 Arm not included. See accessories. 2 All HID lamps are mogul-base. 3 320/350W Pulse Start Metal Halide lamp only. 4 400W Metal Halide requires reduced
envelope ED28 lamp. 5 Dual Compact Fluorescent lamp options available in Type 4S distribution only. 6 Compact Fluorescent ballasts contain internal fusing.
No supplemental fusing is necessary. CF ballasts are 120 through 277V. Specify with UNV voltage designation. 7 Products also available in non-US voltages and
50Hz for international markets. Consult factory for availability and ordering information. 8 Dual-tap is 120/277V wired 277V. 9 Multi-tap is 120/208/240/277V wired
277V. 10 Triple-tap is 120/277/347V wired 347V. 11 Custom and RAL color matching available upon request. Consult your INVUE Lighting Systems Representative
for further information. 12 Add as suffix in the order shown. 13 Quartz options not available with SL optic. 14 Dual switching requires dual 57W or dual 70W
Compact Fluorescent lamps. Allows independent switching control of each lamp through use of two (2) electronic ballasts. Allows 50% power reduction when
dual ballasts are independently wired and controlled. 15 House side shield not available on 5S and SL optics. 16 Order separately, replace XX with color suffix.
17 For use in down lighting applications only. 18 Use when mounting fixture heads at 90° increments. 19 Specifications and dimensions subject to change
without notice.
Lamp
Wattage
HID
150=150W
175=175W
250=250W
320=320W
350=350W
400=400W
Compact
Fluorescent
114=(2) 57W
120=(2) 60W
140=(2) 70W
170=(2) 85W
240=(2) 120W
13
13
2
15
Lamp Type
MH=Metal
Halide
MP=Pulse Start
Metal Halide
HPS=High
3
Pressure
3
Sodium
4
CF=Compact
Fluorescent
5
5
5
5
5
13
14
6
Accessories
OA/RA1016=NEMA Photocontrol—Multi-Tap
OA/RA1027=NEMA Photocontrol—480V
OA/RA1201=NEMA Photocontrol—347V
VA1049-XX=Direct Wall Mount Kit
VA1050-XX=Wall Mount Kit with 6 1/2" Arm
VA1055-XX=6 1/2" Arm for Square Pole
VA1056-XX=9" Arm for Square Pole
VA1057-XX=6 1/2" Arm for Round Pole
VA1059-XX=9" Arm for Round Pole
VA1018-XX=Mast Arm Adapter Kit
VA1033-XX=Single Arm Tenon Adapter for 2 3/8" O.D. Tenon
VA1034-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
VA1035-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
VA1036-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
VA1037-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
VA1038-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
VA1039-XX=2 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
VA1040-XX=Single Arm Tenon Adapter for 3 1/2" O.D. Tenon
VA1041-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
VA1042-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
VA1043-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
VA1044-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
VA1045-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
VA1046-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
7
Voltage
120=120V
208=208V
240=240V
277=277V
347=347V
480=480V
DT=Dual-Tap
Wired 277V
MT=Multi-Tap
Wired 277V
TT=Triple-Tap
Wired 347V
UNV=120-277V Universal
Electronic Ballast
16
Optical System
2S=Type II
3S=Type III
4S=Type IV
5S=Type V
SL=Spill Light
8
9
10
Eliminator
17
18
18
17
11
Colors
(add as suffix/must
specify)
BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite Metallic
Options &
Accessories
(See Below)
114-400W
Metal Halide
Pulse Start Metal Halide
High Pressure Sodium
Compact Fluorescent
ARCHITECTURAL
AREA LUMINAIRE
• Two-piece heavy-wall,
die-cast aluminum
housing
• Continuous silicone
gasketing provides IP66
fixture rating
• Impact resistant 1/8" thick
tempered clear or
optional frosted flat glass
• Toolless entry to housing
is provided via two (2)
flush mounted quick
release latches
• Ballast and related
electrical components are
mounted to a reinforced
one-piece die-cast
aluminum power tray
• Choice of five (5) high
efficiency segmented
optical systems
constructed of premium
95% reflective anodized
aluminum sheet
• Mogul-base porcelain
socket for HID lamp
sources
• Housing and arm finished
in a 5 stage premium
TGIC polyester powder
coat paint
• Approximate net weight:
51 lbs. (23 kgs.)
COOPER LIGHTING
1089
###
Loading...