Cooper Lighting Indoor Furnishings User Manual

DESCRIPTION

Perforated
Meshplate

Thermal
Protector

7.45”

4.65”

17.70”

9.29”

21.83”

15.01”

10.96”

4.64”

45º x 45º

Adjust

Double
Gimbal

Integral Electronic

Low Voltage Transformers

An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes TWO (2) 12V AR70 lamps.

For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to

1.25” ceiling thickness. Optional Chicago
Plenum configuration available.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through

branch wiring, 6 #12 90º C supply
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.

D ... Electrical

Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic or magnetic
low voltage transformers on individually
removable “trays” for easy maintenance.
May also be configured for remote power.

E ... Lamps

Two (2) 12V AR70 lamps mounted in
adjustable double gimbals. Lamp holders
are individually removable and may be
regressed 1” for additional cut-off. Lamp
can accept up to three optical accessories
(i.e. lens + hex louver + snoot). 45º x 45º

Catalog # Type

Project

Comments Date

Prepared by

locking lamp adjustment. Beveled-edge
lamp ring is secured with threadless,
bayonet action. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Double contact bayonet base
sockets included.

F ... Mounting

Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 5.44” x 10.09”

COMBOLIGHT®

Multi-Lamp Fixture

Next Generation

Recessed

Two (2) Light

12V AR70

New Construction

Housing

Trimless

NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.

ORDERING INFORMATION

C2 N N

Configuration

=

COMBOLIGHT

C2

Recessed Two (2) Light

www.cooperlighting.com

Lamp Type / Wattage Label
050A70 = 50 Watt max. AR70 12V

Housing
N = New Construction
C = Chicago Plenum

Specifications and Dimensions subject to change without notice.

Power Supply
E = Electronic Low Voltage

M = Magnetic Low Voltage

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Power Supply
Voltage
1 = 120V
2 = 277V

Transformer

Transformer

Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal

Trim Insert
N = Trimless

Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver

Trim Insert Finish
N = Trimless

rev 022408