Cooper Lighting IMI-447 User Manual

VAPOR-TIGHT
WALL MOUNT

INSTALLATION INSTRUCTIONS

IMPORTANT: Read carefully before installing fixture. Retain for future reference.

Warning:

• FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN

SERIOUS INJURY OR DEATH

• This fixture is not suitable for Hazardous
or Classified Locations. Disconnect all
electrical power before installation or
servicing.

• Not for use above cooking equipment.

• This product must be installed in
accordance with the applicable installation
code by a person familiar with the
construction and operation of the product
and the hazards involved. Consult a
qualified electrician to ensure correct
branch circuit conductor.

5/01 IMI-447

For Models:
ICVW1 Series
(200 Watt / 120 Volt) 1/2 NPS
ICVW2 Series
(300 Watt / 120 Volt) 3/4 NPS

Instructions:

• Disconnect all electrical power from the source as per the
NEC.

➔ Turn off and lock circuit breakers and remove fuses

protecting the circuit.

• Complete connections as per the diagram and the NEC
using approved methods and devices. Proper grounding
must include ground screw and ground wire.

• A surface mounted fixture requires the use of caulking
compounds to provide a moisture tight seal. Use RTV
silicone sealant.

• Relamp with proper wattage lamp only -- allow fixture to
cool for relamping.

➔ Lamps: (Sizes vary by manufacturer, so caution must

be taken with Max Lamp Sizes stated.)
ICVW1: 200W MAX; A21 MAX; 120V MIN
ICVW2: 300W MAX; PS25 MAX; 120V MIN

• Min Supply Conductor Requirements.

ICVW1: 75ºC
ICVW2: 90ºC

FIXTURE

Not Required in
Some Applications

BLACK LINE (HOT)
WHITE
GROUND

Ground Screw

NEUTRAL
GREEN/GROUND

Mounts to Standard
J-Boxes when
Desired.

Ground Screw
Connection when
Standard J-Box
Desired

Applications:

• Suitable for operation in Ambients not exceeding 40ºC.

• Suitable for Wet Locations.

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.

LUMARK 1121 HIGHWAY 74 SOUTH PEACHTREE CITY, GEORGIA 30269 5/01 IMI-447 ADH010709