Cooper Lighting IMI-446 User Manual

VAPOR-TIGHT

CEILING MOUNT

INSTALLATION INSTRUCTIONS

IMPORTANT: Read carefully before installing fixture. Retain for future reference.

Warning:

• FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN

SERIOUS INJURY OR DEATH

• This fixture is not suitable for Hazardous
or Classified Locations. Disconnect all
electrical power before installation or
servicing.

• Not for use above cooking equipment.

For Models:
ICVC1 Series
(200 Watt / 120 Volt) 1/2 NPS
ICVC2 Series
(300 Watt / 120 Volt) 3/4 NPS

Instructions:

• This product must be installed in
accordance with the applicable installation
code by a person familiar with the
construction and operation of the product
and the hazards involved. Consult a
qualified electrician to ensure correct
branch circuit conductor.

FIXTURE

5/01 IMI-446

BLACK LINE (HOT)
WHITE
GROUND GREEN/GROUND

NEUTRAL

• Disconnect all electrical power from the source as per the
NEC.

➔ Turn off and lock circuit breakers and remove fuses

protecting the circuit.

• Complete connections as per the diagram and the NEC
using approved methods and devices. Proper grounding
must include Ground Screw and Ground Wire.

• A surface mounted fixture requires the use of caulking
compounds to provide a moisture tight seal. Use RTV
silicone sealant.

• Relamp with proper wattage lamp only -- allow fixture to
cool for relamping.

➔ Lamps: (Sizes vary by manufacturer, so caution must

be taken with Max Lamp Sizes stated.)
ICVC1: 200W MAX; A21 MAX; 120V MIN
ICVC2: 300W MAX; PS25 MAX; 120V MIN

• Min supply conductor requirements.

ICVC1: 150ºC
ICVC2: 150ºC

Applications:

• Suitable for operation in Ambients not exceeding 40ºC.

• Suitable for Wet Locations.

• Not for use in dwellings.

• ICVC2 Series - Non-combustible surface only.

Required to comply
with most Construction
Requirements
(Supplied)

Ground Screw

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.

LUMARK 1121 HIGHWAY 74 SOUTH PEACHTREE CITY, GEORGIA 30269 5/01 IMI-446 ADH010710