Page 1
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
08/02/2008 3:00:44 PM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADF042290
MOUNTING DATA
LAMP CONFIGURATIONS
DESCRIPTION
The F-Bay I8 series is an outstanding solution for high mounting height
industrial or retail applications. The F-Bay I8 optic has been optimized to
provide maximum performance from T8 lamps. Optional uplight component
is provided to enable excellent ceiling uniformity. The I8's high lumen
package allows the benefits of fluorescent to be applied at high mounting
heights that were traditionally exclusive to H.I.D. The primary benefits
include exceptional color rendering, high system efficacy, 95% lumen
maintenance, long lamp life, instant on/instant re-strike, economical
dimming, and uniform brightness control. Primary applications include "big
box" retail, shopping malls, light industrial, school gymnasiums, etc.
A ... Construction
Specification grade full body
housing, end plates and socket
tracks are die formed 20 gauge
cold rolled steel in 4' or 8' lengths.
The housing features an integral
ballast channel that adds strength
and provides numerous KOs for
easy installation.
B ... Electrical
Class "P" ballasts are positively
secured by mounting bolts.
Rotorlock Bi-Pin lampholders and
optional top ballast access plate
enables service from above
without disturbing the internal
optics. Optional modular power
receptacle meets UL2459 and NEC
410.73 and is UL/cUL rated for
make and break under load from
outside the luminaire to speed
maintenance. UL/cUL listed.
Suitable for damp locations.
C ... Finish
Electrostatically applied baked
white enamel finish is preceded by
a multistage cleaning cycle, iron
phosphate coating with rust
inhibitor.
D ... Downlight/Uplight Optics
Optical modules are fully enclosed
inside housing to protect against
damage. Die formed reflectors are
faceted for efficiency and control
with two optical distributions:
medium and wide. Medium beam
optical modules utilize 95%
specular aluminum finish. Open
downlight design optimizes perfor-
mance with uplight slots available
as an option for nominal 8%
uplight component. An optional
attractive thin blade white baffle
adds longitudinal shielding. A clear
or frosted white acrylic lens is also
available. Optional heavy duty
wireguard can be used with or
without the lens or baffle. Latched
retention of shielding options
(safety leader restraints) allow for
easy access.
Mounting
The I8 series is suited for surface,
suspension mounting with
optional wire hook and chain set,
stem or cable mounting. Top
connector box mounting is also
available. Narrow 11" housing
allows mounting within 12"
horizontally from the nearest edge
of the sprinkler deflector.
Options
Integral Occupancy Sensor
available and provides from 600
sq. ft. (MS) up to 1250 sq. ft. (MSO)
of coverage at a maximum
mounting height of 40'.
F-BAY
I8 Series
4 ' OR 8 '
3 LAMPS
Retail/Light Industrial
T8 Linear Fluorescent Hi-Bay
Lighting System
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means of
disconnecting power
4-15/16"
[126mm]
11" [280mm]
A B C
D
96" [2438mm]
48" [1219mm]
2-3/4" [70mm]
Top Connector Box
Mounting
11/16" [18mm] K.O.
for Cable or Pendant Mounting
11"
[280mm]
11/16" [18mm] K.O.
for Cable or Pendant Mounting
Access Plate
11"
[280mm]
11/16" [18mm] K.O. (2)
for Cable or Pendant Mounting
48" [1219mm]
Top Connector Box
Mounting
Access Plate
11" [280mm]
4-15/16"
[126mm]
X=2-3/4"
[70mm]
XX
EB Ballast
332 = 82
8T332 = 167
EB/Plus Ballast
332 = 108
8T332 = 220
ER Ballast
332 = 93
8T332 = 169
ER/Plus Ballast
332 = 120
8T332 = 218
Luminaire Efficacy Rating
LER =94
Catalog Number: I8-332-UNV-UPL
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $2.54
* Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements
** Consult Pre Sales Technical Support.
E N E R G Y D A T A
Input Watts:
COOPER LIG H T I NG - METAL U X
®
Page 2
Specifications and Dimensions subject to change without notice.
PHOTOMETRICS
ORDERING INFORMATION
SHIPPING INFORMATION
I8
C a nde la
Angle Along II 45° Across
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
3547 3547 3547
3526 3528 3516
3477 3393 3233
3394 3104 2822
3281 2757 2455
3138 2426 2159
2967 2149 1921
2771 1873 1698
2548 1640 1486
2305 1415 1317
2041 1196 1266
1759 1021 1196
1465 945 1097
1160 842 953
853 709 769
552 528 581
270 334 271
51 64 17
0 3 1
C o effi ci en ts o f Ut il iz at io n
Effective floor cavity reflectance 20%
rc 80% 70% 50% 30% 10% 0%
rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
RCR
0
1
2
3
4
5
6
7
8
9
10
Z o nal L um en S um ma ry
Zone Lumens %Lamp %Fixture
0-30
0-40
0-60
0-90
0-180
I8-332-UNV-UPL
Electronic Ballast
F28T8-SP35 Lamps
2750 Lumens
Spacing criterion:
(II) 1.2 x mounting
height, ( ) 0.9 x
mounting height
Efficiency 96.2%
Test Report:
I8332UNVUPL.IES
LER = FL-94
Yearly Cost of 1000
lumens, 3000 hrs at
.08 KWH = $2.54
2384 28.9 30.0
3656 44.3 46.1
5946 72.1 74.9
7451 90.3 93.9
7935 96.2 100.0
113 113 113 113 110110 110 110 104 104 104 98 98 98 93 93 93 90
104 99 95 92 100 97 93 90 91 88 86 87 84 82 82 80 79 76
95 87 81 75 91 85 79 74 80 75 71 76 72 69 73 69 66 64
86 77 69 63 84 75 68 62 71 65 60 68 63 59 65 60 57 55
79 68 60 54 77 67 59 53 64 57 52 61 55 51 58 53 49 47
73 61 53 47 71 60 52 46 57 51 45 55 49 44 52 47 43 41
68 56 47 41 66 54 47 41 52 45 40 50 44 39 48 43 38 36
63 51 42 37 61 50 42 36 48 41 36 46 40 35 44 39 34 33
59 46 38 33 57 45 38 33 44 37 32 42 36 32 41 35 31 29
55 43 35 30 54 42 35 30 40 34 29 39 33 29 38 32 28 27
52 40 32 27 50 39 32 27 38 31 27 36 31 26 35 30 26 24
S AM PL E N UM B ER : 8 TI 8- 33 2- EB 82 /P LU S- UP L- U
NOTES:
(1)
Requires use of MC or MPC cord accessories, specify voltage for plugs.
(2)
Use with wide distribution optic only.
(3)
Voltage must be
specified when ordered with plugs, motion sensors or emergency ballasts.
(4)
ER8 and EB8 ballast systems suitable for operation in ambient
environments up to 122°F (50°C) in open uplight configurations.
(5)
Specify voltage.
(6)
For use with Top Connector Box options. See accessories.
(7)
TAP
option available with a maximum of two ballasts, including EM battery pack.
(8)
Not for use in gymnasiums or similar recreational facilities.
(9)
Dimming
ballast must be specified at time of order.
No. of Lamps
3=3 Lamps
Lamp Type
32=32W T8 (4') Lamps
Series
I8=T8 Industrial
Length
Blank=4' Length
8T=8' Length
Voltage
(3)
UNV=Universal
120/277 Voltage
UNC=Universal
347/480 Voltage
120V=120 Volt
277V=277 Volt
347V=347 Volt
480V=480 Volt
Shielding Options
Blank=Open
TBW=Thin White Baffle
FL=Frosted Acrylic Lens & Frame
(2)
CL=Clear Acrylic Lens & Frame
ASY= Asymmetric Directional Louver
(2)
WG=Heavy Duty Wireguard
Distribution Optic
Blank=Medium (Specular Aluminum)
G=Wide (High Reflectance White)
Mounting Arrangement
Blank=Stand Alone
R=Continuous Row Mount
Options
I8 Lamps Installed
L8830=T8 Lamp, 85CRI 3000K
L8835=T8 Lamp, 85CRI 3500K
L8841=T8 Lamp, 85CRI 4100K
L8850=T8 Lamp, 85CRI 5000K
GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed
(3)
Options
NUA=No Uplight Apertures In Housing
(Cannot be combined w/UPL)
UPL=Uplight Apertures
PI/CPI=Plug-In (1, 2 or 3)
(see ordering information)
TILW=Tandem Inline Wiring
MWS=Modular Wiring System
MS=Aisle Coverage Motion Sensor
(5)
MSO=360° Coverage Motion Sensor
(5)
C3=3' Power Cord
C6=6' Power Cord
MP=Modular Power Receptacle
(1) (3)
PC3-=3' Power Cord & Plug (Specify Voltage)
TAP=Top Access Plate
(7)
TCBP=Top Connector Box Plate
(6)
Packaging
U=Unit Pack
PAL=Palletized
Out of Carton
PALC=Palletized
In Carton
Ballast Type
T8 Systems
EB8 =T8 Electronic Instant Start.
(4)
Total Harmonic Distortion < 10%
EB8 /PLUS= T8 Electronic Instant Start.
(4)
High Ballast Factor >1.15.
Total Harmonic Distortion < 10%
ER8 =T8 Electronic Program Rapid Start.
(4)
Total Harmonic Distortion < 10%
ER8 /PLUS= T8 Electronic Program Rapid Start.
High Ballast Factor >1.15.
Total Harmonic Distortion < 10%
DIM=Consult Factory
(9)
No. of Ballast
1, 2 or 3
No. of Ballast
1, 2 or 3
No. of Ballast
1, 2 or 3
Accessories (order separately)
TCB=Top Connector Box
RH-1=Retrofit Hanger
FH-1=Fixture Hook
FL-1=Fixture Loop
SHK=Hook w/ Safety Screw
PC3-=3' Power Cord & Plug (Specify Voltage)
PC6-=6' Power Cord & Plug (Specify Voltage)
AYC-CHAIN/SET/U=(2) Hooks, 36" Chain Sets w/S-
Hooks
(8)
GRIPPLE TOGGLE-=Single Toggle, #2 Cable (Specify 10' or
30')
GRIPPLE LOOP-=Loop Hanger, #2 Cable (Specify 10' or
30')
MC6=6' Modular Power Cord
MPC6=6' Modular Power Cord & Plug (Specify
Voltage)
MMS-CPD1200H=Aisle Motion Sensor, Box, Modular
Power Receptacle (120/277V)
MMS-CPD500H=360° Motion Sensor, Box, Modular
Power Receptacle (120/277V)
Door Frames (for Field Installation)
I8-FRM/LENS PK=Frosted Acrylic Lens & Frame (I8)
I8-FRM/CL PK=Clear Acrylic Lens & Frame (I8)
WG/I8-4FT-B=Heavy Duty Wireguard (I8)
BAFFLE 4FT I8 (White) 11571919=Thin White Blade
Baffle (I8)
BAFFLE 4FT I8=Thin White Blade Baffle (I8)
90801PPK=Asymmetrical Directional Louver
No. of
Ballast
1, 2 or 3
I8-332-UNV-UPL 15 lbs.
8TI8-332-UN
V-UPL 30 lbs.
Catalog No. Wt.
Metalux • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
08/02/2008 3:00:44 PM
ADF042290
Page 3
Specifications and Dimensions subject to change without notice.
PI OPTION ORDERING INFORMATION
BLK=Black Hot
PI1= Single
Circuit
NG= No Ground (ground
provided by fixture body)
WG= With Ground
(separate ground wire
in harness)
P I 1 - S i n g l e C i r c u i t P l u g - I n
S AM PL E N UM B ER : P I 1B L K- W G
BLK=Black Hot
BLU=Blue Hot
PI2= Two
Circuit
NG= No Ground (ground
provided by fixture body)
WG= With Ground (separate
ground wire in harness)
P I 2 - T w o C i r c u i t P l u g - I n
S AM PL E N UM B ER : P I 2B L K- W G
Leave Blank=Single
Neutral
/WHT=White Neutral
/GRY=Gray Neutral
Leave Blank=Single
Neutral
2NEU=Two Neutrals
BLK=Black Hot
BLU=Blue Hot
RED=Red Hot
PI3= Three
Circuit
NG= No Ground (ground
provided by fixture body)
WG= With Ground (separate
ground wire in harness)
P I 3 - T h r e e C i r c u i t P l u g - I n
S AM PL E N UM B ER : P I 3B L K- W G
Leave Blank=Single
Neutral
/WHT=White Neutral
/GRY=Gray Neutral
Leave Blank=Single Neutral
2NEU=Two Neutrals
For complete product data, reference the Fluorescent
Specification binder. Specifications & dimensions subject
to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
Catalog Circuit
Number Number of Wired To
Suffix Circuits Ballast
PI 1 BLK 1 Black
PI 2 BLU 2 Blue
PI 2 BLK 2 Black
PI 3 RED 3 Red
PI 3 BLU 3 Blue
PI 3 BLK 3 Black
Catalog Numbering System
The PI System is available in sections up to 8' in length for continuous row wiring by simply plugging the sections
together. Each PI section is factory wired to the ballast leads. Color coding of wires is as follows:
PI-1 = One Circuit - 2 Wires: one black, one white
PI-2 = Two Circuits - 3 Wires: one black, one blue, one white
PI-3 = Three Circuits - 4 wires: one black, one blue, one red, one white
When ordering the PI2/PI3 System it is necessary to specify the number of fixtures required for each circuit. Each circuit in
fixture must be ordered as a separate line item, with a different hot wire color specified. All wiring to external feeds, using
cord or cord & plug, are responsibility of installing licensed contractor. Cord and cord & plug sets must be ordered
separately if PI option is chosen.
No internal fixture
access required for
installation or
disconnecting power.
Code Compliance
• UL/cUL Certified for Make/Break
under load (UL2549)
• Meets NEC requirements for
ballast disconnect (NEC 410.73G)
• Allows for addition of Occupancy
Sensor without hard connections
• Receptacles complete with
insulating dustcap
Cooper Lighting’s F-Bay Modular Power Supply option allows external fixture access for safe and easy servicing. There is no need
to remove lamps or reflectors to disconnect fixture power with F-Bay Modular Power Supply. Access to the individual fixtures
power supply allows servicing without turning off all the fixtures disrupting occupants. F-Bay Modular Power Supply is a time
saver in installation – simply plug & power.
1 2
Modular F-Bay Power Supply
1. Modular Power Supply Receptacle supplied
mounted into fixture Access Plate.
2. Modular Power Cord & Plugs in 120, 277, 347,
& 480V configurations for easy plug & power
into existing supply.
Modular Motion Sensor Option
supplied with Mounting Box and
Modular Power Supply Receptacle.
Metalux • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
08/02/2008 3:00:44 PM
ADF042290
Loading...