Cooper Lighting HR87C User Manual 2

Catalog #

Project

Comments

Prepared by

Type

Date

SPECIFICATION FEATURES

08/23/2010 10:54:20 AM

Consult your representative for additional options and finishes.

Specifications and Dimensions subject to change without notice.

ADX041293

ORDERING INFORMATION

DESCRIPTION

The real workhorse in emergency lighting systems...these durable, reliable
units are unparalleled in performance and provide freedom from
maintenance. The HR Series units provide a low-cost, solid-state lighting
system for applications in industrial, commercial or multi-housing
environments. High and ultra-high capacity makes them ideal for
installations where a large number of heads/exits will be remotely operated.

Electronic

- Dual Voltage Input
120/277 VAC, 60 Hz

- Line-latching

- Solid-state Voltage
Limited Charger

- Solid-state Switching

- Low-Voltage Disconnect

- Brownout Circuit

- Overload/Short Circuit Protection

- Test Switch/Power
Indicator Light

- Isolation Transformer

Housing Construction

- 18-Gauge Die-Formed
Steel Housing

- 18-Gauge Die-Formed
Steel Cover

- Knockout, Conduit or Cord Set

- Universal J-Box Mounting
Pattern (High Capacity
Series Only)

Housing Construction Cont.

- Keyhole Mounting Slots

- White Finish

Battery

- Sealed Lead Calcium,
Recombination

- Maintenance-Free, Long-Life

- Full Recharge Time,
24 hrs. (max.)

- Polarized Battery Terminals

Code Compliance

- UL 924 Listed

- City of Chicago Approval
No. 3238

- Life Safety NFPA 101

- CSA Certified (HR12117 Only)

- NEC/OSHA

- Most State and Local Codes

Warranty

- Unit: 1-year

- Battery: 5-year pro-rata

Head/Lamp Data

- Two Heads Standard

- Top Mounted

- Glare-Free Lens

- Fully Adjustable

- Remote Capability

- Metal Heads with Die Cast
Metal Swivel

- Halogen Lamp Standard

- Matches Housing Finish

Mounting Requirement

- Mount only on a vertical plane
(i.e. wall mount, etc.)

HR180C
HR12170C
HR12210C
HR12360C

ULTRA HIGH CAP ACITY

SEALED LEAD CALCIUM

B ATTER Y

Chicago Code

Emergency Lighting

8 1/4"

[210mm]

9"

[229mm]

11 3/4"

[299mm]

18"

[457mm]

17 1/4"

[438mm]

19 1/4"

[489mm]

5 3/4"

[146mm]

4 1/4"

[108mm]

14 1/4"

[362mm]

8"

[203mm]

12 1/2"

[318mm]

14 1/2"

[368mm]

Figure 1 High Capacity Figure 2 Ultra High Capacity

E N E R G Y D AT A

HR87C

Input Current (Max.):
120V= .50A
277V= .21A

HR117C

Input Current (Max.):
120V= .53A
277V= .22A

HR12117C

Input Current (Max.):
120V= .26A
277V= .13A

HR180C

Input Current (Max.):
120V= .98A
277V= .43A

HR12170C

Input Current (Max.):
120V= 1.08A
277V= .45A

HR12210C

Input Current (Max.):
120V= 1.02A
277V= .47A

HR12360C

Input Current (Max.):
120V= 1.17A
277V= .54A

Accessories (order separately)
VK1=Voltmeter
3BRWH=Mounting Brackets (3-White Finish)
2MSWH=Mounting Shelf (High Capacity Units)
3MSWH=Mounting Shelf (Ultra-High Units)
CSK120=Cord Set (120 VAC)
CSK277=Cord Set (277 VAC)
VS2=Polycarbonate Vandal Shield
WG7=Wire Guard (High Capacity units)
WG3=Wire Guard (Ultra High Capacity units)

Model Number
HR87C
HR117C
HR12117C
HR180C
HR12170C
HR12210C
HR12360C

S A M P LE N U M B E R : H R 8 7 C T D M

Options (add as suffix)

Alternate Lamps: Consult Cooper Lighting

Representative

A=Ammeter
V=Voltmeter
TDM=Time Delay Monitor

Other Options: Consult Cooper Lighting

Representative

HR

HR87C

HR117C

HR12117C

SEALED LEAD CALCIUM

B ATTER Y

COOPER LIGHT I N G - SURE-LITE S

®

Specifications and Dimensions subject to change without notice.

ELECTRICAL RATINGS

SERIES

CHICAGO HR 6-VOLT

Model Type DC Voltage 1 1/2 Hours Lamp Watts Remote Watts

HR87C SLC 6 87 24 63
HR117C SLC 6 117 24 93
HR12117C SLC 12 117 24 93
HR180C SLC 6 180 24 156
HR12170C SLC 12 170 24 146
HR12210C SLC 12 210 24 186
HR12360C SLC 12 360 24 336

R a ted W a t t age to 87 1/2% of Rated D.C. Voltage

L a mp I n f o r m ati o n

Type Wattage Number Figure

Halogen 12 29-66 1
Halogen 12 29-66 1
Halogen 12 29-45 1
Halogen 12 29-66 2
Halogen 12 29-45 2
Halogen 12 29-45 2
Halogen 12 29-45 2

*Batteries may be shipped separately. SLC=Sealed Lead Calcium

H o r iz on ta l Di st ri bu ti on

Ve rt ic al D is tr ib ut io n

Lamp No. 29-45 and 29-66
Initial Lumens

– 302

Lamp No. 29-45 and 29-66

15
FEET
LEFT

FEET

RIGHT

15

FEET FROM LAMP (Measured on axis)

0

1FC

LAMP

AXIS

15
FEET
LEFT

FEET

RIGHT

15

FEET FROM LAMP (Measured on axis)

0

LAMP

AXIS

0.

5 0.3 0.2

1FC

0 20 30 40 50 60

0 20 30 40 50 60

0.1

0.5 0.3 0.2 0.1

H e ads

All metal formed aluminum
lampheads. The die cast metal
three dimensional swivel
assembly permits approximate
aiming adjustment from 80°
vertical and 358° rotation. The
placement is secured with a
lockable pivot mounted on a
rotating base ring.

L a mps

Designed specifically for
emergency lighting applications,
the PAR 36 sealed beam type
design insures optimum glare­free light distribution along
with horizontal and vertical
adjustment by rotating the lens
within the housing. Tungsten
halogen lamps maximize light
output with lower wattage.

H o usi ng

The rugged 18-gauge die­formed steel housing is finished
with an attractive white
corrosion-resistant polyester
powder coat paint. Cabinet has
keyhole mounting slots,
universal mounting pattern,
and knockouts in rear and side
for AC/DC wiring connections
and accessory cord set. Up to
three lighting heads can be
mounted on the cabinet.

L i ne- La tc he d

Sure-Lites’ line-latched
electronic circuitry makes
installation easy and
economical. A labor efficient
AC-activated load switch
prevents the lamps from turning
on during installation to
a non-energized AC circuit.
Line-latching eliminates the
need for a contractor’s return
to a job site to connect the
batteries when the building’s
main power is permanently
turned on.

S o lid -S ta te C ha rg er

Supplied with a 120/277 VAC,
voltage regulated solid-state
charger. Immediately upon
restoration of AC current after
a power failure, the charger
provides a high charge rate.
The charge circuit reacts to the
condition of the battery and
alters the rate of charge in
order to maintain peak battery
capacity and maximize battery
life. Solid-state construction
recharges the battery following
a power failure in accordance
with UL 924.

O v erl oa d an d Sh or t
C i rcu it P ro te ct io

n

The solid-state overload
monitoring device in the DC
circuit disconnects the lamp
load from the battery should
excessive wattage demands be
made and automatically resets
when the overload or short
circuit is removed. This
overload current protective
feature eliminates the need
for fuses or circuit breakers
for the DC load.

B r own ou t Ci rc ui t

The brownout circuit in Sure­Lites’ units monitors the flow
of AC current to the unit and
activates the emergency
lighting system when a
predetermined reduction
of AC power occurs. This
dip in voltage will cause most
ballasted fixtures to extinguish
causing loss of normal lighting
even though a total power
failure has not occurred.

S o lid -S ta te T r ans fe r

The unit incorporates a solid­state switching transistor which
eliminates corroded and pitted
contacts or mechanical failures
associated with relays. The
switching circuit is designed to
detect a loss of AC voltage and
automatically energizes the
lamps. Upon restoration of
the AC power, the emergency
lamps will switch off and the
charger will automatically
recharge the battery.

L o w-V o l tag e Di sc on ne ct

When the battery’s terminal
voltage falls below 80% of the
rated voltage, the low-voltage
circuitry disconnects the
lighting load. The disconnect
remains in effect until normal
utility power is restored,
preventing deep battery
discharge.

Te st S wi tc h/ Po we r In di ca to r
L i gh

t

Conveniently located Test
Switch allows for manual
verification of proper operation
of the transfer circuit and
emergency lamps. The Power
Indicator Light provides visual
assurance that the AC power
is on.

S e ale d Le ad C al ci um B at te ry

The fully sealed, long-life,
maintenance-free lead calcium
battery is ideal for emergency
lighting applications. These
recombinant cycle batteries
typically provide eight to ten
years of life and may be
operated in any position.

W arr an ty

All Sure-Lites’ units are backed
by a firm one-year warranty
against defect in material and
workmanship (excluding
lamps). Maintenance free,
long-life, sealed lead calcium
batteries carry a five-year
pro-rata warranty.

PHOTOMETRICS

TECHNICAL DATA

Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]

08/23/2010 10:54:20 AM

ADX041293