Cooper Lighting HDF User Manual

FAIL-SAFE

A

B

CLEANROOM

®

DIMENSIONS

MOUNTING

Standard

AB

6-3/4" dia. 97-1/4" overall
(171mm) (2470mm)

DESCRIPTION

Fail-Safe’s HDF Series high
pressure hose down
luminaire's sealed tubular

A

design withstands water
penetration, even when

B

subjected to a 1200 PSI high
pressure hose down test.
Stainless steel hardware
provides a water-tight seal by
compressing a high impact
resistant tube between two
fully gasketed end plates.

HDF

Water-tight connectors ensure
the integrity of the seal at the
point of power supply. The

17W-110W

ballast channel is constructed
of non-corrosive, non-rusting
aluminum. An emergency
battery pack is available as an
option. U.L. listed and C.S.A.

HIGH PRESSURE

HOSE DOWN

LUMINAIRE

certified for wet locations.

Surface Mount

Chain Mounting Bracket

Manufactured in accordance
with NSF standards.

HD-PRO

ORDERING INFORMATION

SAMPLE NUMBER: HDF-240-120-EB21-EBP-SMB

Series
HDF=Hose Down

Fluorescent

Lamp Type
2' Nom. Length
114=(1) 14W T5 Lamp
214=(2) 14W T5 Lamps
117=(1) 17W T8 Lamp
217=(2) 17W T8 Lamps
120=(1) 20W T12 Lamp
220=(2) 20W T12 Lamps

4' Nom. Length
128=(1) 28W T5 Lamp
228=(2) 28W T5 Lamps
132=(1) 32W T8 Lamp
232=(2) 32W T8 Lamps
140=(1) 40W T12 Lamp
240=(2) 40W T12 Lamps
160=(1) 60W T12HO Lamp
260=(2) 60W T12HO Lamps
148T8HO=(1)44W T8HO

Lamps
248T8HO=(2)44W T8HO
Lamps

8' Nom. Length
428=(4) 28W T5 Lamps
432=(4) 32W T8 Lamps
440=(4) 40W T12 Lamps
1110=(1) 110W T12HO Lamp
2110=(2) 110W T12HO Lamps
159=(1) 59W T8
259=(2) 59W T8
175=(1) 75W T12 Slimline

SL Lamp

275=(2) 75WT12 Slimline

SL Lamps

186=(1) 86W T8HO
286=(2) 86W T8HO

(1)

Voltage
120=120V
240=277V
277=277V
347=347V
UNV=120V

through
277V

Ballast

LE3=Energy Saving

Ballast

Electronic Ballast
EB51=(1) Ballast for

use with T5
Lamp

EB52=(2) Ballasts for

use with T5
Lamp

EB81=(1) Ballast for

use with T8
Lamp

EB82=(2) Ballasts for

use with T8
Lamp

EB21=(1) Ballast for

use with T12
Lamp

EB22=(2) Ballasts for

use with
T12Lamp

• Heavy gauge aluminum
ballast channel and
stainless steel ballast
channel end plate are
finished with high
reflectance white powder
coat paint. Gloss: 85%;
Reflectance: 93%;

Options
EBP=Emergency

Battery Pack

GLR=Fuse and

Holder

Z=Low

Temperature
Starting Ballast

LL=Lamps Included

Accessories

(Order Separately)

(3)

=Quick

DWC-X

Disconnect
Power Cord
(X=Cord
Length)

SMB=Surface Mounting

Bracket Kit

CMB=Chain Mounting

Bracket

Hardness: 2H; Salt Spray:
500 Hours

• Heavy gauge aluminum
reflector finished with high
reflectance white powder
coat paint. Gloss: 85%;
Reflectance: 93%;
Hardness: 2H; Salt Spray:
500 Hours

• High impact resistant, DR
blended acrylic tube

• 1/2" thick opaque PVC

(2)

endcaps are fully sealed
with closed cell silicone
gasketing

• Standard Class P, CBM/ETL
ballast

• Five-foot, three-wire cord
and water-tight connector
is standard. Other cord
lengths are available

• Stainless steel sash chain
and S-hooks standard.
Heavy duty stainless steel
surface/wall mounting
bracket optional

Notes: For additional options, consult your Cooper Lighting Representative. Specifications and Dimensions subject to change
without notice.

1

Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.

2

For specific electronic ballasts, specify brand name and catalog number. 3Consult factory for cord length options and availability.

COOPER LIGHTING

1469