Page 1
FAIL-SAFE
ARCHITECTURAL VANDAL RESISTANT
®
DIMENSIONS
DESCRIPTION
The Fail-Safe 12" Harmony
Paladin combines exceptional
aesthetics with remarkable
strength. Cast, extra-heavy
aluminum walls of the
12"dia.
305mm
10"
254mm
12"dia.
305mm
front/back housings offer
rugged durability and afford
efficient heat dissipation. A
premium, five-stage paint
finish further protects the
4.7"
120mm
RPS-12 / RVS-12
(Surface Incandescent & Compact Fluorescent)
26W-42W CT
75W-100W IN
SURFACE HID & COMPACT
FLUORESCENT WITH
EMERGENCY BATTERY PACK
8.5"dia.
217mm
.250"dia.
Mounting K.O.
J-Box
Mounting Plate
8.7"
222mm
RPS-12 / RVS-12
(Surface HID & Compact Fluorescent with
Emergency Battery Pack)
50W-100W HPS/MH
4.7"
12"dia.
305mm
8.875"
225mm
3.75"
95mm
120mm
housings.
A liquid injection-molded
silicone gasket provides a
water- and dust-tight seal
between the fixture’s housing
and front-lens assembly.
Paladin is CUL-listed for wet
locations in all mounting
positions. This handsome
fixture will blend seamlessly
into virtually any unsupervised
environment where broad,
low-glare light distribution is
aesthetically pleasing and
security essential: shopping
centers, roadside malls,
corporate building exteriors or
transportation stations.
RPR-12 / RVR-12
(Regressed HID & Regressed
Compact Fluorescent with EM)
50W-70W HPS/MH
Paladin (RPS/RPR)
Vision (RVS/RVR)
INSIDE/OUTSIDE POLYCARBONATE
LENS COATING
REGRESSED HOUSING MOUNTING AND ADVANCED ORDERING INFORMATION
REGRESSED SAMPLE NUMBER
RPR-12-50MH-DT-BK-BB
RPR-12-LH-50MH-DT-BK-BB RBB-12
=
+
Complete Unit
LH=
Color
BK=Black
WH=White
3
=Dual Tap
3
=Multi Tap
Less
Regressed
Housing
Options
4
=Polycarbonate Opal
P
Lens
5
=Emergency
EM
Battery Pack
6
=Fuse
F1
L=With lamp
Q=Quartz restrike (lamp
supplied by others)
QS=quartz socket only
QLL=quartz lamp
SC=(3) side conduit
taps w/plugs (top,
left, right)
SW=Soft White glass
lens
The following regressed
housings may be ordered
in advance
RBB-12-F=For Combustible (Studwall)
Applications - Fluorescent Fixtures Only
RBB-12=For Combustible (Studwall) Applications
- HID and Incandescent Fixtures Only
RCP-12=For Non-Combustible (Brick, ConcretePour) Applications - HID, Fluorescent, and
Incandescent Fixtures
RSM=Rough surface
mounting
Back Box Application
Regressed
Fixture only
CP=Concrete pour
regressed housing
(Non-Combustible
Materials Only)
BB=Standard regressed
housing
(Combustible
Materials Only)
Accessories
(Order Separately)
VRSD=TORX
screwdriver
VRSB=TORX
screwdriver
bit
BB=Combustible Material Application
CP=Brick or Concrete Pour
EXAMPLE: RBB-12
WITH THE STUDWALL
BRACKETS
ORDERING INFORMATION
SAMPLE NUMBER: RPS-12-100MH-DT-WH-L
Product Family
RPS-12=Round
Paladin
Surface,
12" Round
1
=Round
RPR-12
Paladin
Regressed,
12" Round
RVS-12=Round
Vision
Surface,
12˝ Round
1
=Round
RVR-12
Vision
Regressed,
12" Round
NOTES: For additional options, consult your Cooper Lighting Representative. Specifications and dimensions subject to change without notice.
1
70W maximum all regressed fixtures. Wall mount only. Back box may be shipped in advance- see Regressed Housing Mounting & Ordering Information.
Regressed housing is not necessary with standard incandescent fixtures. 2Ceiling mount HID units-- 70W maximum and to be mounted on non- combustible
material only. 3Available wired voltages other than 277V, add desired voltage before MT or DT; (e. g. 120V/MT) 475W maximum when ceiling mounted. 50W
maximum regressed units. 5Compact fluorescent fixtures only. Surface mount fixtures require deep (HID) housing. Available in semi-recessed. 6For HID specify
single voltage only. TORX®is a registered trademark of Camcar Division of Textron Inc.
Lamp
Wattage/
Type
Compact
Fluorescent
26CT
32CT
42CT
2
HID
50MH
70MH
100MH
50HPS
70HPS
100HPS
Incandescent
75IN
100IN
Voltage
Compact
Fluorescent
DT=120/277
347=347V
HID
120V=120V
208V=208V
240V=240V
277V=277V
347V=347V
DT
120V/277V
(wired 277)
MT
120/208/240/27
(wired 277)
Incandescent
120V=120V
12" HARMONY™
26W-42W
Compact Fluorescent
50W-100W
High Pressure Sodium
Metal Halide
75W-100W
Incandescent
• Lens is tempered borosilicate
glass 0.225 inches thick and
floats on a gasket for shock
resistance. The lens
dissipates heat and is
unaffected by UV light,
pollution and cleaning
solutions. Half-inch, convex
pillow prisms spread lamp
image and provide an even
glow. For an even softer glow,
use the optional -SW “Soft
White Lens.”
• Surface and regressed
housings are cast-aluminum
for superior strength and
corrosion resistance. Marinegrade low-copper-alloy
aluminum material. The
regressed housing is
provided with adjustable
mounting brackets to
accommodate for wall
material thickness.
• Long-life, injection-molded
silicone gasket promotes
water- and dust-tight seal
between housing and frontlens assembly. 1/8-inch-thick,
closed-cell EDPM gasket
facilitates proper seal
between luminaire and
mounting surface. No
additional caulking is
required.
®
• Four stainless-steel TORX
screws with center reject pin.
• Porcelain medium base
socket with nickel-plated
brass screw shell. Fluorescent
socket is polycarbonate.
Incandescent socket is
porcelain medium-base with
nickel-plated brass screw
shell.
• Ballasts are standard HPF
and dual-tap 120V/277V.
HID is minus 20° F starting;
electronic CFL is 0° F starting.
COOPER LIGHTING
®
1407
Loading...