Cooper Lighting Halo LF601, Halo LF602, Halo LF Specification Sheet

COOPER LIGHTING

LF FLEXIBLE TRACK

Structural

Extruded aluminum I-beam 0.060” nomi­nal wall thickness. Flexible Track is 1­1/2” high by 7/16” wide.

120V and 12V Conductors

Nickel-plated solid copper bus bars
(cross section equivalent to #10AWG
wire) encased in extruded CPVC insula­tors.

Insulating Liner

Extruded polyvinyl insulators.

Grounding

Grounding is accomplished through a
grounding channel in the track. The
track maintains continuity to the track
connectors, lampholders and building”s
grounding system through this channel.

Polarity

Track is asymmetric in nature and
accepts connectors and lampholders in
one direction only to maintain polarity.

Details

• Track ships with two dead ends. Track
minimum bend radius is
24 inches.

• Separate power feed is required for
each circuit to be energized

• A track support is required every four
feet. More Supports may be required
depending on the complexity of the
“curved” design layout.

• It is recommended to have a track sup­port at the apex of every curve.

• A track support is required within six
inches of any non stem supported
connector.

• Track lengths and stems can be cut to
size in field.

Track
LF=Flexible

Track

Finish
AH=Aluminum Haze

LF

Length
4=4”
8=8”

AH

LF601AH 120V Feed with Stem/Canopy

Description: 120V Power feed with canopy and stem mounts on stan-

dard junction box (supplied with feed wires)

Feeds one 120V circuit only.

LF60112AH 12V Feed with Stem/Canopy

Description: 12V Power feed with canopy and stem. mounts on standard

junction box (supplied with feed wires).
Remote 12V transformer required to energize.

Accessory
LF601=Flexible

Track

Voltage
Blank=120V
12=12 Volt

Finish
AH=Aluminum

Haze

4=4”
6=6”
12=12”
18=18”

24=24”
36=36”
48=48”
96=96”

LF601

AH

LF602AH Clam Shell Track Support Stem with Small Canopy (non-conductive)

Description: Rigid stem with clam shell attachment supports the track.

Accessory
LF602=Flexible

Track

Finish
AH=Aluminum

Haze

LF602 AH

LINE

NEUTRAL

Dove Tail
Support Slot

NEUTRAL

LINE

Length
(Ceiling to bottom of track)

6=6”
12=12”
18=18”

24=24”
36=36”
48=48”
96=96”

Length
(Ceiling to bottom of track)

LF612AH Dead End

Description: Finishes end of track. Aluminum Haze finish. (two included with

each track section)

LF

Flexible Track

LF601

Power Feed

LF602

Track Support

7/16”

[11mm]

1-1/2”

[38mm]

HALO

®

• ARCHITECTURAL FLEXIBLE TRACK

4” not for use in Canada

346

ARCHITECTURAL TRACK LIGHTING Incandescent