Cooper Lighting GRA25MWWXX User Manual
84 STREETWORKS Outdoor Lighting Solutions
Cooper Lighting
NOTE: 1 Order arm separately. 2 Refer to technical section for lamp/ballast/voltage compatibility. 3Must use reduced envelop lamp. 4Not available in 1000W. 5 Available in 1D, 2D, 3D, FT. AR. 6Arm length varies based on housing
size. 7 Required for mounting fixtures at 90° increments.
HOUSING
Roll-formed aluminum housing with
stamped reveal has interior-welded
seams for structural integrity.
Optional NEMA twistlock
photocontrol. ANSI wattage/source
label.
BALLAST
Ballast is hard-mounted to housing
interior for cooler operation.
REFLECTOR
Spun and stamped anodized
aluminum reflector in vertical lamp
units, or hydroformed anodized
aluminum reflector in horizontal
lamp units.
SPRINGS
Aluminum door retaining springs.
DOOR
Formed aluminum door for
arm-mount fixture has retaining
springs, while spider-mount unit
has a heavy-duty hinge and captive
retaining screws. Door is finished in
polyester powder coat.
LENS
Convex tempered glass lens.
Tempered flat glass available.
FINISH
Standard polyester powder coat
finish in bronze. For more color
options see optional colors or
consult your Streetworks
represenatitive for more
information.
ORDERING INFORMATION
SAMPLE NUMBER: GRA25MWWXX
OPTIONS +
ACCESSORIES
(See Below)
ARCHITECTURAL AREA LUMINAIRE
OPTIONS (add as suffix)
1=Single Fuse, Internally Mounted (120 or 277)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
AP=Grey
DP=Dark Platinum
GM=Graphit Metallic
H=Plug-in Starter Receptacle
4
B=House Side Shield
AIR=Arm Included for Round Pole
6
AIS=Arm Included for Square Pole
6
CSR=Color Reveal Stripe—Red
CSB=Color Reveal Stripe—Blue
CSY=Color Reveal Stripe—Yellow
CSG=Color Reveal Stripe—Green
CSD=Color Reveal Stripe—Gold
CSS=Color Reveal Stripe—Silver
CSW=Color Reveal Stripe—White
ACCESSORIES (order separately)
MA1025=14" Arm for Square Pole
7
MA1026=6" Arm for Square Pole
MA1006=Direct Mounting Kit for Square Pole
MA1027=14" Arm for Round Pole
7
MA1028=6" Arm for Round Pole
MA1009=Direct Mounting Kit for Round Pole
MA1061=House Side Shield—Field Installed (Medium Housing)
MA1062=House Side Shield—Field Installed (Large Housing)
PRODUCT
FAMILY
1
GRA=Arm
GRC=Spider
2 3/8" 3" O.D.
LAMP
WATTAGE
25=250W
40=400W
91=1000W
BALLAST
TYPE
2
W=CWA
C=CWI
M=Mag. Reg.
LAMP TYPE
2
S=High Pressure
Sodium
M=Metal
Halide
R=SMH
VOLTAGE
2
2=120V
0=208V
4=240V
7=277V
8=480V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
DISTRIBUTION
1D=Type I MCO (Horizontal)
2D=Type II MCO (Horizontal)
3D=Type III MCO (Horizontal)
3V=Type III (Vertical)
FT=Forward Throw (Horizontal)
AR=Area Round (Vertical)
AS=Area Square (Vertical)
RW=Rectangular Wide (Vertical)
SL=Spill Light Eliminator (Horizontal)
3, 4
LENS TYPE
FG=Flat Glass
3, 5
SG=Sag Glass
GR GALLERIA ROUND
250-1000W
MH/HPS/SMH
AREA
SHIPPING DATA
Approximate Net Weight:
86 lbs. (40 kgs.)
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
STREETWORKS
™
Fixture A B C D E F
250-400W (in.) 18 1/4 3 1/2 19 3/4 24 1/2 6 or 14 16
(mm) 464 89 502 676 152 or 356 406
1000W (in.) 19 3/4 4 1/4 25 5/8 32 15/16 6 or 14 19 3/4
(mm) 502 108 651 837 152 or 356 502
OPTIONAL COLORS [Standard color is bronze, other finish colors available. Consult your Cooper Lighting representative]
WH
White
BK
Black
AP
Grey
NOTE: In all flat glass configurations only.
GM
Graphite Metallic
DP
Dark Platinum
A
B
C
D
E
A
B
C
D
F
STREETWORKS Outdoor Lighting Solutions 85Cooper Lighting
GR GALLERIA ROUND AREA
GRA91SARS.IES
1000-Watt HPS
140,000-Lumen Lamp
Area Round Sag Glass
FOOTCANDLE TABLE
Select mounting height and read across for footcandle values of
each isofootcandle line. Distance in units of mounting height.
Mounting Footcandle Values for
Height Isofootcandle Lines
ABCDE
GRA91SARS.IES
30' 3.54 2.66 1.77 0.88 0.44
35' 2.60 1.95 1.30 0.65 0.32
40' 2.00 1.50 1.00 0.50 0.25
45' 1.58 1.18 0.79 0.39 0.19
50' 1.28 0.96 0.64 0.32 0.16
GRA91M3DF.IES
30' 3.54 2.66 1.77 0.88 0.44
35' 2.60 1.95 1.30 0.65 0.32
40' 2.00 1.50 1.00 0.50 0.25
45' 1.58 1.18 0.79 0.39 0.19
50' 1.28 0.96 0.64 0.32 0.16
GRA91M3DF.IES
1000-Watt MH
110,000-Lumen Lamp
Type IIIMCO Flat Glass
2" OR 3" DIRECT MOUNT TENON ADAPTER
ORDERING INFORMATION
Catalog Tenon Fixture
Number Size (In.) Configuration
MA1010 3 1/2 O.D 1 Fixture
MA1011 3 1/2 O.D 2 Fixtures at 180°
MA1012 3 1/2 O.D 3 Fixtures at 120°
MA1013 3 1/2 O.D 4 Fixtures at 90°
MA1014 3 1/2 O.D. 2 Fixtures at 90°
MA1015 3 1/2 O.D 2 Fixtures at 120°
MA1016 3 1/2 O.D 3 Fixtures at 90°
MA1017 2 3/8 O.D 1 Fixture
MA1018 2 3/8 O.D 2 Fixtures at 180°
NOTES: Fitters for other tenon sizes available. Consult your Streetworks representative. Tenon adapter for through
bolt mounted luminaires. Standard adapter is bronze painted steel.
(“M” Drilling for Arm Mounting)
PHOTOMETRICS [Complete IES files available at www.cooperlighting.com]
MOUNTING CONFIGURATIONS
DRILLING PATTERN
TYPE “M”
E.P.A. TABLE
SINGLE
DRILL PATTERN [W/Arm where applicable] 2 @ 180° 2 @ 90° 3 @ 90° 3 @ 120° 4 @ 90°
GRA [Arm Mount] 250-400W
“M”
1
2.2 4.4 5.4 7.1 7.1 7.9
GRC [Spider Mount] 250-400W 3" 2.0 n/a n/a n/a n/a n/a
GRA [Arm Mount] 1000W “M”
1
3.0 6.0 7.0 9.5 9.5 10.7
GRC [Spider Mount] 1000W 3" 2.8 n/a n/a n/a n/a n/a
NOTE: 1 Assumes 14" arm for 90° and 120° mounting configurations, 6" for all else.
5
4
3
2
D EC
B
A
0 1 2 3 4 5 6 6 5 4 3 2 1
1
0
1
2
3
4
5
C
B
A
0 1 2 3 4 5 6 6 5 4 3 2 1
5
4
E
D
3
2
1
0
1
2
3
4
5
Spider Mount
Arm Mount Single
2 11/16''
[69mm]
3/4'' [20mm]
dia. hole
2 7/16'' [124mm]
4 7/8'' [124mm]
(2) 5/8'' [16mm]
dia. holes
Arm Mount 2 @ 180° Arm Mount 2 @ 90°
Top Cap
12''
[305mm]
Set
Screws
Arm Mount 3 @ 120°
(Requires 14” Arm)
Round Pole Only
Arm Mount 3 @ 90°
(Requires 14” Arm)
Arm Mount 4 @ 90°
(Requires 14” Arm)
Loading...