Cooper Lighting GMA25SWWAR User Manual

80 STREETWORKS Outdoor Lighting Solutions

Cooper Lighting

NOTES: 1 Arm not included. See Accessories. 2 Available on GL housing only. 3 Medium-based lamp for GS housing. Mogul-base on GM and GL housings.4 Pulse Start Metal Halide vertical mount only. 51000W GM with flat-

glass requires BT-37 lamp and is not available in RW distribution. 6 Refer to technical section for lamp/ballast/voltage compatibility. 7Requires reduced envelope lamps, not available in GL housing. 8 Not available in
1000W. 9 Not available in GS housing. 10 Not available in 1000 Watt HPS. 11 Arm length varies based on housing size. Arm supplied with luminaire: 9" for GS (EPA 0.5), 11 1/2" for GM (EPA 0.62) and 14" for GL (EPA 1.0).

12 Required for mounting fixtures at 90° increments. 13 Compatible with sag lens vertical optics only.

HOUSING

Formed aluminum housing with
stamped reveal has interior-welded
seams for structural integrity.
Optional NEMA twistlock
photocontrol. ANSI wattage/source
label.

BALLAST

Ballast is hard-mounted to housing
interior for cooler operation.
Optional removable ballast tray.

REFLECTOR

Spun and stamped aluminum
reflector in vertical lamp units, or
hydroformed anodized aluminum
reflector in horizontal lamp units.

DOOR

Formed aluminum door has
heavy-duty hinges, captive
retaining screws and is finished
in polyester powder coat. (Spider
mount unit has steel door.)

LENS

Convex tempered glass lens.
Tempered flat glass available.

FINISH

Standard polyester powder coat
finish in bronze. For more color
options see optional colors or
consult your Streetworks
represenatitive for more
information.

NOTE: In all flat glass configurations only.

ORDERING INFORMATION
SAMPLE NUMBER: GMA25SWWAR

OPTIONS +
ACCESSORIES

(See Below)

ARCHITECTURAL AREA LUMINAIRE

OPTIONS (add as suffix)
1=Single Fuse, Internally Mounted (120 or 277V)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
AP=Grey
B=House Side Shield
H=Plug-in Starter Receptacle

8

T=Removable Ballast Tray
F=Flat Glass
AIR=Arm Included for Round Pole

11

AIS=Arm Included for Square Pole

11

CSR=Color Reveal Stripe—Red
CSB=Color Reveal Stripe—Blue
CSY=Color Reveal Stripe—Yellow
CSG=Color Reveal Stripe—Green
CSD=Color Reveal Stripe—Gold
CSS=Color Reveal Stripe—Silver
CSW=Color Reveal Stripe—White

ACCESSORIES (order separately)
MA1004=14" Arm for Square Pole

(GM & GL only)

12

MA1005=6" Arm for Square Pole

(GM & GL only)

MA1006=Direct Mount Kit for Square Pole
MA1007=14" Arm for Round Pole

(GM & GL only)

12

MA1008=6" Arm for Round Pole

(GM & GL only)

MA1009=Direct Mount Kit for Round Pole
MA1021=6" Arm for Square Pole (GS Only)
MA1022=6" Arm for Round Pole (GS Only)
MA1023=9" Arm for Square Pole (GS Only)

12

MA1024=9" Arm for Round Pole (GS Only)

12

MA1029=Wall Bracket

MA1060=House Side Shield for GS

(Field Installed)

13

MA1061=House Side Shield for GM

(Field Installed)

13

MA1062=House Side Shield for GL

(Field Installed)

13

OA1066=Pipe Adapter
OA1209=TufGuard Vandal Shield for GS
OA1210=TufGuard Vandal Shield for GM
GSM-EXTHS-XX=Medium External House

Side Shield (Specify Color)

GSL-EXTHS-XX=Large External House Side

Shield (Specify Color)

PRODUCT
FAMILY

GS=Galleria

Square
Small

GM=Galleria

Square
Medium

GL=Galleria

Square
Large

MOUNTING
METHOD

A=Arm Mount

1

B=Spider Mount

(2 3/8" - 3" O.D. Tenon)

C=Spider Mount

(3 1/2" O.D. Tenon)

2

LAMP
WATTAGE

3

10=100W
15=150W
17=175W
25=250W
40=400W
75=750W

4

91=1000W

5

LAMP TYPE

6

S=High

Pressure
Sodium

M=Metal

Halide

R=SMH

VOLTAGE

6

2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
W=Multi-Tap

wired 120V

N=Multi-Tap

wired 277V

V=Multi-Tap

wired 240V

DISTRIBUTION
1D=Type I MCO (Horizontal)
2D=Type II MCO (Horizontal)

2S=Type II Segmented (Horizontal)

7, 8

3D=Type III MCO (Horizontal)
3S=Type III Segmented (Horizontal)

7, 8

3V=Type III (Vertical)

9

4S=Type IV Segmented (Horizontal)

7, 8

5S=Type V Segmented (Horizontal)

7, 8

FT=Forward Throw (Horizontal)
AR=Area Round (Vertical)
AS=Area Square (Vertical)
RW=Rectangular Wide (Vertical)

SL=Spill Light Eliminator (Horizontal)

10

BALLAST TYPE

6

P=Hi. Reac./HPF
H=Reac./HPF
N=Hi. Reac./NPF
R=Reac./NPF
W=CWA
K=10KV CWA
C=CWI
M=Mag. Reg.

GS/GM/GL GALLERIA SQUARE

100-1000W

MH/HPS/SMH

AREA

SHIPPING DATA

Approximate Net Weight:

GS 36 lbs. (16 kgs.)
GM 79 lbs. (36 kgs.)
GL 88 lbs. (40 kgs.)

OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]

STREETWORKS

™

Fixture A B C D E F
GS (in.) 9 1/4 1 1/2 12 7/8 15 5/8 6 or 9 3 1/4

S (mm) 235 38 327 397 152 or 229 337

GM (in.) 11 3 1/2 19 1/4 21 3/4 6 or 14 15 or 16

(mm) 279 89 480 552 152 or 356 381 or 406

GL (in.) 14 1/2 4 1/4 25 7/8 27 6 or 14 18 3/4 or 19 3/4

(mm) 368 108 657 686 152 or 356 476 or 502

NOTE: Top cap used on GM with 1000W flat glass vertically lamped optics only.

OPTIONAL COLORS [Standard color is bronze, other finish colors available. Consult your Cooper Lighting representative]

WH

White

BK

Black

AP

Grey

WATTAGES
GS 100-175
GM 175-1000
GL 400-1000

A

B

C

D

E

A

B

C
D

F

STREETWORKS Outdoor Lighting Solutions 81Cooper Lighting

GS/GM/GL GALLERIA SQUARE AREA

PHOTOMETRICS [Complete IES files available at www.cooperlighting.com]

MOUNTING CONFIGURATIONS

DRILLING PATTERN

TYPE “M”

GMA40S3DF.IES

400-Watt HPS
50,000-Lumen Clear Lamp
Type III Flat Glass

GMA91M3VF.IES

1000-Watt MH
110,000-Lumen Clear Lamp
Type III Vertical Flat Glass

GSA17M3DF.IES

175-Watt MH
14,000-Lumen Clear Lamp
Type III Flat Glass

GMA91MASS.IES

1000-Watt MH
110,000-Lumen Clear Lamp
Area Square Sag Glass

GMA91MARF.IES

1000-Watt MH
110,000-Lumen Clear Lamp
Area Round Flat Glass

4

3

2

1

0

1

2

3

4

0 1 2 3 4 5

A

B

C

D

E

4

3

2

1

0

1

2

3

4

0 1 2 3 4 5

A

B

C

D

E

E.P.A. TABLE

SINGLE

DRILL PATTERN [W/Arm where applicable] 2 @ 180° 2 @ 90° 3 @ 90° 3 @ 120° 4 @ 90°

GSA [Arm Mount] “M” 1.7 3.4 3.4 4.6 4.6 5.2
GMB [Spider Mount] 2 3/8" or 3" 1.04 n/a n/a n/a n/a n/a
GMA [Arm Mount]

“M”

1

2.9 5.8 6.8 9.2 9.2 10.4

GMB [Spider Mount] 3" 2.22 n/a n/a n/a n/a n/a
GLA [Arm Mount] “M”

1

4.4 8.8 9.8 13.7 13.7 15.6

GLC [Spider Mount] 3" or 3 1/2" 3.7 n/a n/a n/a n/a n/a

NOTE: 1 Assumes 14" arm for 90° and 120° mounting configurations, 6" for all else.

FOOTCANDLE TABLE

Select mounting height and read across for footcandle values of each
isofootcandle line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

ABCDE

GSA17M3DF.IES

10' 11.25 4.50 2.25 1.16 0.45

15' 5.00 2.00 1.00 0.50 0.25

20' 2.80 1.12 0.56 0.28 0.19

GMA40S3DF.IES
30' 2.00 1.00 0.50 0.25 0.10

35' 1.46 0.73 0.37 0.18 0.07
40' 1.12 0.56 0.28 0.14 0.06

GMA91MARS.IES

30' 3.50 2.00 1.00 0.50 0.20
35' 2.60 0.73 0.37 0.18 0.07

40' 2.00 1.00 0.50 0.20 0.10

FOOTCANDLE TABLE

Select mounting height and read across for footcandle values of each
isofootcandle line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

ABCDE

GMA91M3VF.IES / GMA91MASS.IES

30' 3.50 2.00 1.00 0.50 0.20
35' 2.60 0.73 0.37 0.18 0.07

40' 2.00 1.00 0.50 0.20 0.10

GMA91MARF.IES
30' 2.00 1.00 0.50 0.25 0.10

35' 1.46 0.73 0.37 0.18 0.07
40' 1.12 0.56 0.28 0.14 0.06

GMA91MARS.IES

1000-Watt MH
110,000-Lumen Clear Lamp
Area Round Sag Glass

4

3

2

1

0

1

2

3

4

0 1 2 3 4 5

A

B

C

D

E

4

3

2

A

012345

0 1 2 3 4 5

E

D

B

C

A B C D E

1

0

1

2

3

4

4

3

2

1

0

1

2

3

4

A B C D E

0 1 2 3 4 5

4

3

2

1

0

1

2

3

4

Wall Mount

Arm Mount Single

2 11/16''

[69mm]

4 7/8'' [124mm]

(2) 5/8'' [16mm]
dia. holes

Arm Mount 2 @ 180° Arm Mount 2 @ 90°

3/4'' [20mm]
dia. hole

2 7/16'' [124mm]

Arm Mount 3 @ 120°
(Round Pole Only)

Arm Mount 4 @ 90°Arm Mount 3 @ 90°