Cooper Lighting CX User Manual

COOPER LIGHTING - SURE-LITES

EXIT SIGNS Architectural

®

DIMENSIONS

DESCRIPTION

The CX Surface Mounted Die

5 1/16" [129mm]

15/16" [24mm]

4 3/8"

[111mm]

Cast Aluminum Exit combines
the strength and durability of
die casting with the bright
even illumination of LED lamp
sources. Unlike competitive
units that have a pronounced
dot effect from protruding
diodes, the CX LED offers

8 1/4"

(210mm)

unequalled uniform
illumination and brightness.
The CX Self-Powered LED
comes standard with the
Watchguard EMS
self-diagnostic system insuring

12 5/8" [321mm]

ORDERING INFORMATION

SAMPLE NUMBER: CX7170RSD

2 1/4"

[57mm]

Self-Diagnostics

The self-diagnostic unit will automatically perform all
tests required by UL924 and NFPA 101. The system
indicates the status of the unit at all times using the
LED indicator near the test switch on the side of the
unit. A 90 minute battery power (emergency mode)
simulation test will occur randomly once every six
months.

fixture reliability and reducing
maintenance costs.

CX

Family
CX=Die Cast

Aluminum
Exit

Series
6=AC Only, LED
7=Self-Powered,

LED

Face Options
1=Single
2=Double

Energy Data — Self-Powered Exits

LED Exits -Red Letters 2.8W 2.9W .03A .02A > .81 > .77 < 32% < 46%
LED Exits -Green Letters 3.9W 3.6W .08A .04A > .41 > .43 < 48% < 49%

Battery
Blank=No

Battery (CX6)
70=Nickel
Cadmium
Battery (CX7)

Letter Colors
R=Red
G=Green

Sealed Nickel Cadmium Battery

Input Power: Input Current (Max.): Power Factor: T.H.D.:

120V 277V 120V 277V 120V 277V 120V 277V

Housing
Finishes
Blank=

Brushed
Aluminum
Face with
Black
Housing

W=White
B=Black

LED Exits

SD=Self-

Diagnostic
*(CX7 only)

Options
2C=Two Circuit

Operation,
FTBR
(CX6 Only)

Accessories (Order Separately)
CAX18PKBK=18" Pendant Kit,

Black

CAX18PKWH=18" Pendant Kit,

White

CAX18PKHTBK=18” Hang-True

Pendant Kit, Black

CAX18PKHTWH=18” Hang-True

Pendant Kit, White

VS1=Polycarbonate Vandal Shield

(Wall Mount Only)

VS1WP=Weather Resistant

Polycarbonate Vandal
Shield (Wall Mount Only)

WG10=Wire Guard (Wall Mount

Only)

WGS11=Wire Guard (Ceiling or

End Mount Only)

CX SERIES

Die Cast

AC Only

Self-Powered

EXIT LIGHTING

• Dual-voltage Input
120/277 VAC, 60 Hz,
isolation transformer

• Die cast aluminum housing

• Die cast canopy included

• LED Lamping

• Watchguard EMS
Self-Diagnostic System
(CX7 Only)

• Exit can be universally
mounted ceiling, wall
or end

• Universal pattern knock­outs on rear of single
face housing for direct
mounting to junction box

• NFPA 101 compliant
knockout chevrons allow
quick conversion to
directional signs

• Self-powered Exits feature
line-latching, solid-state
voltage limited charger,
low-voltage disconnect,
brownout circuit, over­load/short-circuit
protection, test switch/
power indicator light

• Damp Location Listed (AC
Only), UL 924 Listed, CSA
Certified, Life Safety NFPA
101, NEC/OSHA, Energy
Star Listed, AC Only-UL
FTBR when specified with
the “2C” option, most state
and local codes, suitable for
floor proximity installation.

Energy Data — AC Only Exits

Input Power: Input Current (Max.): Power Factor: T.H.D.:

120V 277V 120V 277V 120V 277V 120V 277V

LED Exits

LED Exits -Red Letters 2.4W 2.5W .03A .02A > .78 > .73 < 33% < 48%
LED Exits -Green Letters 3.2W 3.0W .08A .03A > .33 > .35 < 50% < 52%

COOPER LIGHTING

633