Cooper Lighting CR220M39 User Manual

Catalog #

Type

Project

COMBOLIGHT® COMBO CLASSIC RECESSED

LAMP GROUP 2 - CONFIGURATION “A”
FOUR (4) Metal Halide lamp cells - ONE (1) Fluorescent lamp cell
New Construction Recessed Housing - Trim or Trimless

ORDERING EXAMPLE:

= Four PAR20 Metal Halide 39W lamps with One BIAX® 40W Fluorescent • Black Interior • White Trim • 120 volts

CR220M39 A BX40 BK WH 120

Fluorescent >> BX40 BX50 PLL80 PLT26 PLT32 PLT42 T528 T535 T5HO39 T5HO54

Lamp Group 2

Metal Halide

A

53.58” 54.58” 55.58” 36.08” 36.58” 37.58” 77.08’ 89.08” 65.08” 77.08”

B

70.68” 70.38” 70.38” 52.85” 53.38” 54.38” 93.88” 105.88” 81.88” 93.88”

C

25.50” 25.50” 25.50” 8.00” 8.50” 9.50” 49.00” 61.00” 37.00” 49.00”

RSA LIGHTING®

RSA LIGHTING LLC 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311

TOLL FREE: 800-356-3030 • 818-349-3030 • FAX: [phone] • www.rsalighting.com

©2003 RSA Lighting LLC All Rights Reserved • Specifications subject to change without notice.

SPECIFY -

A

Optional Accessories - See RSA Combo Classic accessory page for details.

Baffle Snoots Louvers Lenses

Fluorescent Diffusers and Louvers - Please specify

❑ TWD - Textured White Diffuser ❑ CB1 - 2” Parabolic Louver
❑ MPD - Conical Prism Diffuser ❑ CB2 - 1” Parabolic Louver

Custom configurations are available with Combo Classic fixtures.
Also available with T8 fluorescent lamps. Consult RSA for details

DESCRIPTION:

An adjustable recessed fixture
suitable for multiple downlighting
applications with one point of elec­trical entry. Mixes the use of metal
halide lamps with fluorescent
lamps. Powder coat finish on hous­ing & lamp assembly.

CONSTRUCTION:

Housing, Plaster Frame & Trim
Assembly: 18 gauge CRS. J-Box
Assembly: 16 gauge CRS (galva­nized). Fixture is offered with a .75”
ceiling trim or as a trimless fixture.
Can accommodate 0.50” to 1.00”
ceiling thickness.

LAMP ASSEMBLY:

Four Metal Halide lamp cells with
one fluorescent lamp cell . Can
accept up to two optical acces­sories. 380º x 45º locking lamp
adjustment. Provides 45º visual
cut-off.

SYSTEM PROTECTION:

Thermal protection provided to
guard against overheating, and
misuse of insulation over and
around fixture. Vent holes in hous­ing provide cooler operation

ELECTRICAL:

Fixture is two circuit.
Circuit 1: Integral Aromat® elec­tronic metal halide ballasts for
metal halide lamps.

Circuit 2: Integral electronic bal­lasts for fluorescent lamps.

Lutron® dimming ballasts avail­able upon request.

Junction box is UL listed for
through branch wiring, for 8 #12,
90°C supply conductors or 60°C for
end of run (access above ceiling
not required).

Made in the USA

.

Item # / Lamp Type Configuration Fluorescent Lamp Interior Finish Trim Finish Voltage

Lamp
Group 2
Metal
Halide

CR220M39 - PAR20MH 39W

A - Four Metal Halide lamp

cells with One
Fluorescent lamp cell

BX40 - 40W BIAX® BK - Black BK - Black 120 - 120 Volts

CR230M39 - PAR30MH 39W

BX50 - 50W BIAX® WH - White WH - White 277 - 277 Volts

CR230M70 - PAR30MH 70W

PLL80 - 80W PL-L S - Silver S - Silver
PLT26 - 26W PL-T PT - Custom PT - Custom
PLT32 - 32W PL-T TR - Trimless
PLT42 - 42W PL-T
T528 - 28W T5
T535 - 35W T5
T5HO39 - 39W T5HO
T5HO54 - 54W T5HO

T8 lamps also available

___

___

___

___

___

9.50"

8.75"

13.80"

L

M

E

A

T

I

E

L

D

M

I

R

T

0.75" Trim

7.00"

I

R

T

Fluorescent lamp cell
w/ integral ballast accessible
from below

Integral reflector

S

S

D

E

T

A

I

L

Ceiling compund
is applied right
to the edge of the
fixture opening

B

Ballast

C
A

Must specify a diffuser or louver

for fluorescent cell. See below.

13.80"

Aromat®
Electronic
Metal Halide
Ballasts

Thermal Protector

380º x 45º locking
angular adjustment
45º visual cut-off

Butterfly
Brackets
for Black Iron
Mounting