The Steeler LED is designed for a wide variety of applications and
mounting heights. Precision designed optics, multiple distributions,
lumen outputs and color temperatures make the Steeler LED ideal
for industrial, commercial, manufacturing, gymnasium
(9)
and other
applications that utilize traditional HID and linear fluorescent high bays.
The proprietary discrete, low-brightness LED module assembly offers
exceptional optical performance with the enhanced benefits of LED
lighting, including energy savings, extended system life, a reduced
carbon footprint.
SPECIFICATION FEATURES
Construction
Diecast aluminum lower housing
provides added protection for
LED components and optimal
performance. Upper driver housing
consist of heavy gauge CRS for
durability and thermal control.
Optics
Precision designed, high-impact
polycarbonate optics deliver even
illumination. Narrow, medium
and wide distribution ensures
superior performance to key areas
within an application. Additional
performance options include a low
Electrical
Long-life LED system coupled with
profile optical shroud and uplight
reflector. IP65 rated optics.
electrical driver to deliver optimal
performance. LED’s available in
3500K, 4000K and 5000K with a
CRI ≥ 80. cULus listed. Electronic
drivers are available for 120-277V,
347V and 480V applications.
Options
Integral Occupancy Sensor
available and provides 1200 sq.
ft. of coverage in a maximum
mounting height of 30’.
Standard 0-10V dimming. Or,
specify the Digital Addressable
Lighting Interface (DALI) drivers for
use with Fifth Light controls.
Catalog #
Project
Comments
Prepared by
Mounting
The SSLED series is ideally suited
for suspension mounting with
various mounting options.
Compliance
Luminaires are cULus listed for
damp locations -40°C - 55°C
ambient environments with
0-10V drivers (see chart). RoHS
compliant, and LED modules
comply with IESNA LM-79 and
LM-80 standards. DesignLights
Consortium® Qualified and
classified for both DLC Standard
and DLC Premium, refer to www.
designlights.org for details.
Warranty
Five-year warranty.
Metalux
Type
Date
SS
LED
LED Round High Bay
Finish
Standard white polyester powder
coat finish painted after fabrication
for increased durability and rust
inhibition.
SSLED-LD5-9-N-UNV-L850-CD1-USteeler LED 9,000 Lumen, Narrow Dist, 5000K, 0-10V 9,57664149
SSLED-LD5-12-N-UNV-L850-CD1-USteeler LED 12,000 Lumen, Narrow Dist, 500 0K, 0-10V 12,76985150
SSLED-LD5-15-N-UNV-L850-CD1-USteeler LED 15,000 Lumen, Narrow Dist, 500 0K, 0-10V 15,829111143
SSLED-LD5-18-N-UNV-L850-CD1-USteeler LED 18,000 Lumen, Narrow Dist, 500 0K, 0-10V 18,596134139
SSLED-LD5-24-N-UNV-L850-CD2-USteeler LED 24,000 Lumen, Narrow Dist, 5000K, 0-10V 24,918191131
SSLED-LD5-30-N-UNV-L850-CD2-USteeler LED 30,000 Lumen, Narrow Dist, 5000K, 0-10V 31,53126611 8
SSLED-LD5-36-N-UNV-L850-CD2-USteeler LED 36,000 Lumen, Narrow Dist, 5000K, 0-10V 36,78933411 0
Medium
SSLED-LD5-9-M-UNV-L850-CD1-USteeler LED 9,000 Lumen, Medium Dist, 50 00K, 0-10V 9,74364152
SSLED-LD5-12-M-UNV-L850-CD1-USteeler LED 12,000 Lumen, Medium Dist, 5000K, 0-10V 12,99385152
SSLED-LD5-15-M-UNV-L850-CD1-USteeler LED 15,000 Lumen, Medium Dist, 5000K, 0-10V 16,106111145
SSLED-LD5-18-M-UNV-L850-CD1-USteeler LED 18,000 Lumen, Medium Dist, 5000K, 0-10V 18,921134141
SSLED-LD5-24-M-UNV-L850-CD2-USteeler LED 24,000 Lumen, Medium Dist, 50 00K, 0-10V 25,35319 1133
SSLED-LD5-30-M-UNV-L850-CD2-USteeler LED 30,000 Lumen, Medium Dist, 50 00K, 0-10V 32,082266120
SSLED-LD5-36-M-UNV-L850-CD2-USteeler LED 36,000 Lumen, Medium Dist, 50 00K, 0-10V 37,432334112
Wide
SSLED-LD5-9-W-UNV-L850-CD1-USteeler LED 9,000 Lumen, Wide Dist, 5000K, 0-10V 9,64064150
SSLED-LD5-12-W-UNV-L850-CD1-USteeler LED 12,000 Lumen, Wide Dist, 500 0K, 0-10V 12,85585151
SSLED-LD5-15-W-UNV-L850-CD1-USteeler LED 15,000 Lumen, Wide Dist, 500 0K, 0-10V 15,935111144
SSLED-LD5-18-W-UNV-L850-CD1-USteeler LED 18,000 Lumen, Wide Dist, 500 0K, 0-10V 18,721134140
SSLED-LD5-24-W-UNV-L850-CD2-USteeler LED 24,000 Lumen, Wide Dist, 5000K, 0-10V 25,085191132
SSLED-LD5-30-W-UNV-L850-CD2-USteeler LED 30,000 Lumen, Wide Dist, 5000K, 0-10V 31,742266119
SSLED-LD5-36-W-UNV-L850-CD2-USteeler LED 36,000 Lumen, Wide Dist, 5000K, 0-10V 37,035334111
SSLED
LUMEN MAINTENANCE
Lumens
24,000 lumen25ºC> 88%> 167,000
30,000 lumen25ºC> 73%> 68,500
36,000 lumen25ºC> 68%> 55,000
Ambient
Temperature
TM-21 Lumen
Maintenance
(60,000 hours)
Theoretical
(hours)
Modular Power Supply Option
12
1. Modular Power Supply
Receptacle supplied mounted
into xture Access Plate.
2. Modular Power Cord & Plugs in
120, 277, 347, & 480V
congurations for easy plug &
power into existing supply.
L70
LUMEN PACKAGES AND AMBIENT TEMPERATURE
DriverReflector
Lumen PackageAmbient
SSLED-LD5-955C55C40C55C55C40C
SSLED-LD5-1255C55C40C55C55C40C
SSLED-LD5-1555C55C40C55C55C40C
SSLED-LD5-1840C40C40C40C40C40C
SSLED-LD5-18HT55C55CN/A55C55CN/A
SSLED-LD5-2440C40C40C40C40C40C
SSLED-LD5-24HT50C50CN/A50C50CN/A
SSLED-LD5-3040C40C40C40C40C40C
SSLED-LD5-3640C40C40C40C35C40C
EMCD5LTDOpenLensed
Eaton’s Modular Power Supply option is available for use with the SSLED.
The modular power supply allows external fixture access for safe and easy
servicing. Access to the individual fixture’s power supply allows servicing
without turning off all the fixtures disrupting occupants. Eaton’s Modular
Power Supply is a time saver in installation – simply plug & power.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
& dimensions subject to change without notice. Consult your Eaton Representative for availability and ordering information.
(4)
No EL with UNC drivers.
(12)
y.
The accessory Loop Hanger shall be utilized only as a secondary safety and not the primary means of mounting.
(14)
DesignLights Consortium® Qualified and classified for both DLC Standard and DLC Premium, refer to www.designlights.org for details.
ACCESSORIES
: SSLED-SA23-U)
ACCESSORY KIT
Voltage
UNV=Universal
Voltage 120-277
UNC=Universal
Voltage 347/480
CCT
L835=3500K
L840=4000K
L850=5000K
Options
Emergency
EL20W-REM=Emergency
Installed, Remote,
20 Watts
Driver Type
CD=0-10V Dimming Driver
5LTD=Fifth Light DALI
Number of Drivers
1=1 Driver (9, 12, 15, 18)
2=2 Drivers (18HT, 24, 24HT, 30, 36)
(7)
(10)
Eaton sensor SVPD3 available in UNV only.
Uplight Kit not compatible with SA23 Shroud, WG17 or WG22 wireguards.
(4)
(2), (3), (4), (5)
(5)
(2)
Battery pack must be remote mounted 1 ft. off-center from fixture to building structure or an electrical
(5)
Refer to ambient ratings chart for specific ambient limits per lumen package and options.
Color
[Blank]=White
GR =Gray
BLK=Black
Mounting Type
[Blank]=3/4" Threaded Hub
SHK=Fixture Hook
TCB=Top Connector Box
TCB/SHK=Top Connector Box with Die-cast
Aluminum Fixture Hook
TCB/FL-1=Top Connector Box with Fixture Loop
MP=Modular Plug (1 Circuit)
MP/SHK=Modular Plug with Fixture Hook (supplied)
MP/FL-1=Modular Plug with Fixture Loop (supplied)
Wiring
C3 (1)=1 Circuit, 3' Cord with no Plug
C3 (2)=2 Circuits, 3' Cord with no Plug
C6 (1)=1 Circuit, 6' Cord with no Plug
C6 (2)=2 Circuits, 6' Cord with no Plug
PC3/120=(NEMA L5-15P) 3' Cord with NEMA Plug
PC3/277=(NEMA L7-15P) 3' Cord with NEMA Plug
PC3/347=(NEMA L24-20P) 3' Cord with NEMA Plug
PC3/480=(NEMA L8-20P) 3' Cord with NEMA Plug
PC6/120=(NEMA L5-15P) 6' Cord with NEMA Plug
PC6/277=(NEMA L7-15P) 6' Cord with NEMA Plug
PC6/347=(NEMA L24-20P) 6' Cord with NEMA Plug
PC6/480=(NEMA L8-20P) 6' Cord with NEMA Plug
(8)
SHK or FL-1 must be ordered factory installed for PC option.
WG22=Wireguard for use with SA23
SSLED-CLR22-U=Clear Reflector
SSLED-FRR22-U=Frosted Reflector
SSLED-CLDL22=Clear Drop Lens
SSLED-CLCDL22=Clear Conical Drop Lens
SSLED-FRDL22=Frosted Drop Lens
SSLED-FRCDL22=Frosted Conical Drop Lens
SHK=Fixture Hook
FL-1=Fixture Loop
(8)
MPC3=3' Modular Power Cord & Plug
(8)
(Specify Voltage)
(8)
MPC6=6' Modular Power Cord & Plug
(8)
(Specify Voltage)
(8)
MC3=3' Modular Power Cord
(8)
MC6=6' Modular Power Cord
(8)
SSLED-DECO-U=Round Deco Kit
(8)
SSLED-UPL-U=Uplight Kit
ISHH-01=Programming Remote for
The Steeler LED with Integrated Sensor technology provides automatic energy savings without sacrificing performance.
Traditionally these types of energy savings required coordination between the luminaire and a lighting control system.
The Steeler LED delivers superior lighting with integrated occupancy and daylighting controls.
Capture the benefits of traditional lighting controls, without complicated coverage planning or special wiring. Ideal for
new construction or retrofit the Steeler LED delivers automatic ON to an energy saving light level, while turned OFF
when the space is unoccupied.
Occupied light levels and unoccupied light levels can be adjusted using the integrated sensor programming
remote (Catalog Number: ISHH-01). The integrated sensor personal remote (Catalog Number: ISHH-02)
provides code compliant manual raise, lower, ON, OFF control.
The Steeler LED with Integrated Sensor is easy to install with no special wiring and ensures energy savings
out-of-the-box with default control settings.
How it works:
• As the user enters the space controlled by the integral sensor, the lighting turns ON to full light
output. This can be changed using the optional remote.
• Lighting will remain at that the occupied level until the space is unoccupied. This will start the
occupancy timeout period (default 20 minutes).
• If the space remains unoccupied for half of the timeout period, the lighting will automatically reduce to
the Energy Saver light level. This adjustable light level is typically half of the occupied level.
• At the end of the timeout period the lighting will go to the unoccupied light level. This adjustable light level uses the OFF default setting.
100
(DO)
Daylight Level
Light Level
0
SVPD3 Coverage Pattern
Side View
0
6.1m
[20 ft.]
9.1m
[30 ft.]
12.2m
[40 ft.]
9.1m
[30 ft.]
6.1m
[20 ft.]
Energy Savings
Opportunities
(ES)
Energy Saver
Light Level
Timeout Value
Target light level default: 500 lux at 8 ft.
0
3m
[10 ft.]
3m
[10 ft.]
6.1m
[20 ft.]
9.1m
[30 ft.]
(DU)
Unoccupied Level
12.2m
[40 ft.]
(DO)
Daylight Level
OccupiedUnoccupiedOccupiedUnoccupied
Optional Remote
Controls
SET
MIN
50
75
MAX
To
S
1. R
e
t
5 0, 75, M
aise, Low
O
u
2. To save press S
t
Occ
p
u
3. S
t
er or P
ax.
elect O
ress M
cc or U
E
in.
T
n O
cc
P
r
o
g
r
a
m
m
i
IS
n
g
H
R
e
H
m
o
-0
t
e
1
ISHH-01 Remote
R
a
i
L
s
o
e
w
/
e
r
Tim
e
O
u
t
LO
Un
5
10
HI
15
ES
20
Occ
Occ
To
S
Pre
elect
ss the SCEN
The lig h
S
stored li ght l
ting wi ll adju
E
evels..
Per
s
onal
IS
Remote
H
H
-0
2
Raise
Lower
/
S
C
E
N
E
MAX
75
50
MIN
ES
Un
Occ
c
e
nes
button.
st to
ISHH-02 Remote
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
August 17, 2018 8:46 AM
PS507014EN
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.