Cooper Lighting COMBOLIGHT T6 User Manual

DESCRIPTION

Thermal
Protector

9.45”

13.01”

17.14”

16.01”

13.01”

45º x 45º

Adjust

Double
Gimbal

6.69”

6.69”

Integral Electronic

Metal Halide Ballast

An adjustable Single-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes ONE (1) T6 G12 Metal Halide
lamp.

For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to

1.25” ceiling thickness. Optional Chicago
Plenum configuration available.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through

branch wiring, 6 #12 90º C supply
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.

D ... Electrical

Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be con­figured for remote power.

E ... Lamps

One (1) T6 G12 Metal Halide lamp with
reflector mounted in adjustable double
gimbal. Lamp holder is individually remov­able and may be regressed 1” for additional
cut-off. Lamp can accept up to three opti­cal accessories (i.e. lens + hex louver +

Catalog # Type

Project

Comments Date

Prepared by

snoot). 45º x 45º locking lamp adjustment.
Beveled-edge lamp ring is secured with
threadless, bayonet action. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
G12 socket.

F ... Mounting

Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 7.49” x 7.49”

COMBOLIGHT®

Single-Lamp Fixture

T6 G12 Metal Halide

Next Generation

Recessed

One (1) Light

New Construction

Housing
Trimless

T6 G12 Lamp with Reflectors

This fixture utilizes T6 Metal Halide lamp and includes high­performance clear aluminum reflectors in narrow, medium,
or wide distributions. Non-standard color reflectors are
available upon request.

ORDERING INFORMATION

C1 E N

Configuration
C1 = COMBOLIGHT Recessed

One (1) Light

www.cooperlighting.com

Lamp Type / Wattage Label / Reflector Type
070T6N = 70 Watt T6 G12 Metal Halide / Narrow
070T6M = 70 Watt T6 G12 Metal Halide / Medium
070T6W = 70 Watt T6 G12 Metal Halide / Wide

Housing
N = New Construction
C = Chicago Plenum

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Power Supply
Voltage
1 = 120V
2 = 277V

Power Supply
E = Electronic Metal Halide

Ballast

Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal

Trim Insert
N = Trimless

Trim Finish
W = White
B = Black
S = Industrial Silver

Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver

rev 050108