Cooper Lighting COMBOLIGHT T4 User Manual

DESCRIPTION

Perforated
Meshplate

Thermal
Protector

7.45”

4.65”

12.01”

4.65”

16.14”

15.01”

10.96”

Integral Electronic

Metal Halide Ballast

45º x 45º

Adjust

Double
Gimbal

An adjustable Single-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes ONE (1) T4 GU6.5 Metal Halide
(GE® Constant Color Super Mini) lamp.

For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to

1.25” ceiling thickness. Optional Chicago
Plenum configuration available.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through

branch wiring, 6 #12 90º C supply
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.

D ... Electrical

Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be con­figured for remote power.

E ... Lamps

One (1) T4 GU6.5 Metal Halide lamp with
reflector mounted in adjustable double
gimbal. Lamp holder is individually remov­able and may be regressed 1” for additional
cut-off. Lamp can accept up to three opti­cal accessories (i.e. lens + hex louver +

Catalog # Type

Project

Comments Date

Prepared by

snoot). 45º x 45º locking lamp adjustment.
Beveled-edge lamp ring is secured with
threadless, bayonet action. Optional
retractable arm is available for lamp pull­down and extreme aiming. Includes GU6.5
TAL socket.

F ... Mounting

Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 5.44” x 5.44”

COMBOLIGHT®

Single-Lamp Fixture

T4 GU6.5 Metal Halide

Next Generation

Recessed

One (1) Light

New Construction

Housing
Trimless

T4 GU6.5 Lamp with Reflectors

This fixture utilizes the GE® SuperMini Constant Color
Lamp and includes high-performance clear aluminum reflec­tors in narrow, medium, or wide distributions. Non-standard
color reflectors are available upon request.

ORDERING INFORMATION

C1 E N

Configuration
C1 = COMBOLIGHT Recessed

One (1) Light

www.cooperlighting.com

Lamp Type / Wattage Label / Reflector Type
020MCN = 20 Watt T4 GU6.5 SuperMini Narrow
020MCM = 20 Watt T4 GU6.5 SuperMini Medium
020MCW = 20 Watt T4 GU6.5 SuperMini Wide

Housing
N = New Construction
C = Chicago Plenum

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Power Supply
Voltage
1 = 120V
2 = 277V

Power Supply
E = Electronic Metal Halide

Ballast

Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal

Trim Insert
N = Trimless

Trim Finish
W = White
B = Black
S = Industrial Silver

Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver

rev 022408