Cooper Lighting CDMR111 User Manual

DESCRIPTION

18” flexible conduit

33.44”

34.27”

39.76”

36.24”

9.95”

11.31”

13.01”

9.45”

Required

above
ceiling

45º x 45º

Adjust

Double
Gimbal

6.69”

Thermal
Protector

Perforated Meshplate

6.69”

Separate Wiring Compartment

9.25”

20.55”

Integral Electronic

Metal Halide Ballasts

An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FIVE (5) CDMR111 Metal Halide
lamps.

For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.

D ... Electrical

Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.

E ... Lamps

Five (5) CDMR111 Metal Halide lamps
mounted in adjustable double gimbal.
Lamp holders are removable and may be
regressed 1” for additional cut-off. Lamp
can accept snoot or baffle accessories.
45º x 45º locking lamp adjustment.
Beveled-edge lamp ring is secured with
threadless, bayonet action. Optional
retractable arm is available for lamp

Catalog # Type

Project

Comments Date

Prepared by

pulldown and extreme aiming. Includes
GX8.5 sockets.

F ... Mounting

A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws through the meshplate.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 7.94” x 34.53”

COMBOLIGHT®

Multi-Lamp Fixture

CDMR111 Metal Halide

Next Generation

Recessed

Five (5) Light

Remodel Housing

Trimless

For use with 39 or 70W CDMR111 Metal halide lamps.

ORDERING INFORMATION

C5 R E N N

Configuration
C5 = COMBOLIGHT

Recessed Five (5) Light

www.cooperlighting.com

Housing
R = Remodel

Lamp Type / Wattage Label
039C11 = 39 Watt CDMR111 Metal Halide
070C11 = 70 Watt CDMR111 Metal Halide

Power Supply
Voltage
1 = 120V
2 = 277V

Power Supply
E = Electronic Metal Halide

Ballast

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Trim Insert
N = Trimless

Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal

Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver

Trim Insert
N = Trimless

rev 050108