Cooper Lighting CC7 User Manual

COOPER LIGHTING - SURE-LITES

EMERGENCY LIGHTS Commercial

®

DESCRIPTION

DIMENSIONS

The CC7 Contractor’s Choice FasTest™
High Capacity Emergency Lighting Units
are an affordable, yet attractive,

13” [330mm]

alternative to standard white two­headed emergency lighting units. All
components snap together to facilitate
installation in 5 minutes or less. Field
versatility is not sacrificed for cost, both

TABLE OF CONTENTS

lighting heads offer full horizontal and

7 15/16” MAX

[202mm]

vertical adjustability. Moreover, proper
operation of the transfer circuit and
emergency lamps can be quickly and
safely verified by using a convenient
laser pointer (sold as an accessory). In
addition, Watchguard EMS self

5 3/4”

[146mm]

diagnostic system is standard
(CC7NCSD only).

The CC7 FasTest™ is ideal for
applications that demand the minimum

19 1/4” MAX

[489mm]

cost but also require maximum
flexibility, reliability and convenience in
an attractive unit.

Self-Diagnostics

The self-diagnostic unit will
automatically perform all tests
required by UL924, and NFPA

101. The system indicates the
status of the exit at all times
using the LED indicator near the
test switch on the side of the

Verify proper operation of the
transfer circuit and emergency
lamps with convenient laser
pointer (sold as an accessory).

ELECTRICAL RATINGS

Rated Wattage to 87 1/2% of Rated D.C. Voltage

Model DC Voltage 1 1/2 Hours Remote Wattage*

CC7 12 60 36

CC7NCSD 12 50 26

ORDERING INFORMATION *See Remote Section Pages 494-499.

SAMPLE NUMBER: CC7208BMTDM

Model Number
CC7
CC7NCSD

Energy Data

Model No. 120V 277V 120V 277V 120V 277V 120V 277V

CC7 28W 28W .26A .11A >.91 >.91 <35% <39%

CC7 3.8W 3.7W .07A .03A >.50 >.50 <94% <99%

CC7NCSD 7.8W 7.1W .08A .04A >.77 >.77 <53% <58%

Options

(Add as suffix)
SQ=Square Head (12W
Standard)
MRT=MR16 Heads (12W
Standard)

A=Ammeter
V=Voltmeter
SD=Self-Diagnostics (CC7NC

Only)

Input Power Input Current (Max.) Power Factor T.H.D.

Charge Mode (Fully Discharged Battery) Sealed Lead Calcium Battery

Standby Mode (Fully Char

TDM=Time Delay Monitor
Cord Set=CSK-120, CSK-277
SM=Side Mount Heads
TM=Top Mount Heads
BM=Bottom Mount Heads
Alternate Lamps, Head Types,
No Head, Multiple Heads
Other Options

ged Battery) Sealed Lead Calcium Battery

Standby Mode

(1)

(1)

unit. A 90 minute battery power
(emergency mode) simulation
test will occur randomly once
every six months.

Lamp Information

Type Wattage Number

Incandescent 12W ea. 029-132
Incandescent 12W ea. 029-132

Accessories

(Order separately)
LASER=Key Chain, Red Laser Pointer

(activation tested at 50 feet)

VS1=Polycarbonate Vandal Shield
VS1WP=Polycarbonate Vandal Shield

Weather Resistant

WG3=Wire Guard
2MS=Mounting Shelf (Specify Color)

4 7/8”

[124mm]

CC7

Contractor’s Choice

EMERGENCY LIGHT

• Dual-Voltage Input 120/277
VAC, 60 Hz

• Injection-Molded, Color­Stable, High-Impact
UL 94-5V Rated
Polycarbonate Housing and
Mounting Plate

• Designer white textured
finish

• Maintenance Free Sealed
Lead Calcium Battery or
Premium Nickel Cadmium
battery (CC7NCSD version
only)

• Housing Has (8) Locations
for Mounting of Heads;
Consult Factory (3 optional
bottom-mount and 3
optional top- mount
locations)

• Knockouts/Cutouts
Provided in Housing for
Surface Conduit
Attachment

• Watchguard EMS self
diagnostic system
(CC7NCSD only)

• Remote Photocell Test
Switch with Automatic
30-Sec. Test Upon Switch
Activation

• Line-Latching, Solid-State
Voltage Limited Charger,
Solid-State Switching, Low­Voltage Disconnect,
Brownout Circuit,
Overload/Short Circuit
Protection, Push-Button
Test Switch/Power Indicator
Light

• UL 924, Life Safety NFPA
101, CSA Certified,
NEC/OSHA, Most State and
Local Codes

(1)

Consult your Cooper Lighting Representative.

COOPER LIGHTING

617