Cooper Lighting BSA2 User Manual
Remote Ballast Mounting Instructions
Ballast
Ballast
Electronic and Compact Fluorescent
Ballast Box Mounting Dimensions
Remote ballast mounting is not outdoor rated. All remote ballasts must
be mounted indoor, unless special ordered.
10"
254
Supplementary Installation Instructions
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
416"
: Before starting any work ensure
3
Sheet 1 of 1
Do not
106.17
5
16
7.64
(4x)
3
10"
254
Top View
"
23
7
32
196.34
"
98"
238.25
1
8
3.45
(4x)
Side View
"
3
9
"
4
247.90
Attention:
Maximum remote distance for an electronic ballast depends upon the ballast manufacturer and may require use of special low
capacitance wire, separate conduit runs for lead wires, or other special installation requirements. See ballast manufacturer's
Lamp Description
Compact Flourescent 1
Compact Flourescent 1
Compact Flourescent 1
Compact Flourescent 1
Compact Flourescent 1
Compact Flourescent 1
Compact Flourescent 1
Compact Flourescent 1
installation instructions or contact the factory for remote mounting distance and installation requirements.
# of
Lamps
Electronic MH 1
Electronic MH 1
Electronic MH 1
Electronic MH 1
Twin Tube 1
Twin Tube 1
Wattage Voltage
39W
70W
150W
150W
26W
26W
32W
32W
42W
42W
57W
57W
40W
40W
UNV 50ft. Electronic MH 2
UNV 50ft. Electronic MH 2
120V 50ft. Compact Flourescent 2
277V 50ft. Compact Flourescent 2
UNV 15ft. Compact Flourescent 2
347V 12ft. Compact Flourescent 2
UNV 15ft. Twin tube 2
347V 12ft. Twin tube 2
UNV 15ft.
347V 12ft.
UNV 15ft.
347V 12ft.
UNV 15ft.
347V 20ft.
Remote
Distance
Lamp Description
# of
Lamps
Wattage Voltage
150W
150W
32W
32W
42W
42W
40W
40W
Remote
Distance
120V 50ft.
277V 50ft.
UNV 12ft.
347V 12ft.
UNV 6ft.
347V 12ft.
UNV 6ft.
347V 20ft.
ADY071488 REV A(ECN080361)
Loading...