BOLLARD SERIES
PATHWAY LUMINAIRES
louvered series—design features
Top
Rugged, minimum 5/32" thick cast aluminum top
cap secured via a concealed stainless steel allen
screw with twist removal mechanism for lamp
access. Flow through ventilation assures cool to the
touch top.
louvers
Cast Aluminum Louver blades provide sharp cutoff
providing no direct light above 90°. Louvers are
secured to the shaft via tamper resistant stainless
steel rods and fasteners.
lamp enclosure
Lamp enclosure is one-piece tempered glass with
internal flutes for even disbursement of illumination.
Decorative colored glass optional. Globe is fully
gasketed via EPDM material. Socket is porcelain,
medium-base for HID lamp sources.
lower housing
Nominal 1/8" thick extruded aluminum housing.
Bollard housing is secured to the base with flathead,
counter-sunk screws for smooth, uncluttered
appearance.
Electrical
High Power Factor ballast for –20°F starting.
Product is factory mounted to the base. Quick
disconnects provided between lamp and electrical
assembly. Metal Halide and High Pressure Sodium
lamp sources up to 100W Metal Halide or High
Pressure Sodium coated lamps.
finish
Premium fade and abrasion resistant, TGIC
Polyester Powder Coat Finish. Standard colors are
Bronze, Architectural White, Grey and Black. Other
architectural finish colors available including all
RAL matches.
Base
Rugged cast aluminum. Completely concealed.
Mounting
Base mounts onto foundation with three (3) 1/2" x
12" anchor bolts on a 5" Dia. bolt circle (a centrally
located 2 7/8" x 3 1/2" wire entrance opening
provided).
louvered series—design features
BSL
square louvered series
BRL
ROund dome top
louvered series
Standard series—design features
Top
Rugged, cast aluminum. Provides rapid heat dissipation.
Encloses the upper reflector so it is hidden from view.
Tamper-proof screws provide easy access to lamp
compartment.
Housing
Consists of a heavy-duty, seamless extruded aluminum
tube. Lifts off base for easy access to ballast.
Optics
Lower dispersing reflector, in conjunction with a truncated,
octagonal upper collecting reflector, provides low-glare,
highly efficient illumination with optimum uniformity.
EXAMPLE
luminaires mounted on 20' centers produce a symmetric
light pattern with a max. to min. uniformity ratio of less
that 4:1.
Lens
1/4" wall, impact-resistant clear acrylic. Polycarbonate
lens is optional.
: Using 70W HPS lamps with Bollard Series
Prismatic refractor
All Bollard Series luminaires are available with an
optional prismatic borosilicate glass refractor to provide
efficient, low-glare light distribution.
Gasketing
Bollards are designed to form a single, integral unit that
is completely gasketed and sealed from outside contaminant’s.
Electrical
High Power Factor ballast for –20°F starting. Product is
factory mounted to the base. Quick disconnects provided
between lamp and electrical assembly. HPS and MH
Lamp sources up to 100W MH or HPS and up to 57W
Compact Fluorescent sources available with MOL length
not exceeding 7".
Finish
Premium fade and abrasion resistant, TGIC Polyester
Powder Coat Finish. Standard colors are Bronze,
Architectural White, Grey and Black. Other architectural
finish colors available including all RAL matches.
Base
Rugged cast aluminum. Completely concealed.
Mounting
Base mounts onto foundation with three (3) 1/2" x 12"
anchor bolts on a 5" Dia. bolt circle (a centrally located 2
7/8" x 3 1/2" wire entrance opening provided). Bollard
housing is secured to the base with flathead, counter-sunk
screws for smooth, uncluttered appearance.
Standard series—design features
bRc
round standard series
bsc
square standard series
optical excellence
Glare-free illumination
The Louver Series bollard features carefully designed
louvers that block direct view of the lamp while creating a
channel for high angle light to escape and effectively
illuminate the pathway below. These duel purpose louvers
eliminate glare and provide comfortable fixture viewing
without sacrificing performance.
UNIFORM ILLUMINATION
The Louvered Series bollard features fluted glass
refractors to direct light rays around louver support
elements, eliminating the potential for unsightly shadows
and streaking in the distribution. Coated lamps, in
conjunction with the refractive glass lens, allow the
Louvered Series bollard to produce uniform illumination.
design flexibility
Add some flair and personality to your
application with the use of optional colored
refractive glass lenses. The Louvered Series
bollards allow the design flexibility with a
selection of highly saturated colors. Producing
a blanket of color on the walkway as well as a
pronounced glow on louvered surfaces, they
feature prismatic refractive technology, ensuring
a uniform distribution of color and light.
optical excellence
efficient illumination
The McGraw-Edison Standard Series bollard locates the lamp
in the housing top cap preventing direct viewing of the lamp at
pedestrian and motorist level. The multi-piece reflector system
works in unison to maximize efficiency by redirecting otherwise
unuseable light onto the lower reflector which focuses light onto
the pathway.
Optical Control
McGraw-Edison bollards are designed to efficiently direct light downward onto
the walkway while concealing the lamp from direct view, eliminating discomfort
glare and ensuring safety and visibility for pedestrians and motorists.
The McGraw-Edison Bollard Series present a responsible pathway lighting solution
for the environmentally conscience.
top view
side view
42"
(1067mm)
36"
(914mm)
32"
(813mm)
28"
(711mm)
24"
(610mm)
42"
(1067mm)
36"
(914mm)
32"
(813mm)
28"
(711mm)
24"
(610mm)
8" (Rd.)
(203mm)
7" (Sq.)
(178mm)
8" (Rd.)
(203mm)
7" (Sq.)
(178mm)
Photometrics
0
0
5x
10x
5x
10x
5x10x 5x 10x
0
0
5x
10x
5x
10x
5x10x 5x 10x
0
0
5x
10x
5x
10x
5x10x 5x 10x
0
0
5x
10x
5x
10x
5x10x 5x 10x
0
0
5x
10x
5x
10x
5x10x 5x 10x
0
0
5x
10x
5x
10x
5x10x 5x 10x
Footcandle Table
Select mounting height and read across for footcandle values of
each isofootcandle line. Distance in units of mounting height.
Mounting Footcandle Values for
Height Isofootcandle Lines
42" 1.20 0.60 0.30 0.12 0.06
36" 2.00 1.00 0.50 0.20 0.10
32" 2.40 1.20 0.60 0.24 0.12
28" 3.20 1.60 0.80 0.32 0.16
24" 4.40 2.20 1.10 0.44 0.22
BSC-XX-100-MH
100-Watt MH
7,900-Lumen Lamp (Clear ED-17)
BSL-XX-100-MH
100-Watt MH
7,900-Lumen Lamp (Coated ED-17)
BSC-XX-100-HPS
100-Watt HPS
8,800-Lumen Clear Lamp (Clear ED-17)
BSL-XX-100-HPS
100-Watt HPS
8,800-Lumen Lamp (Coated ED-17)
Footcandle Table
Select mounting height and read across for footcandle values of
each isofootcandle line. Distance in units of mounting height.
Mounting Footcandle Values for
Height Isofootcandle Lines
42" 1.20 0.60 0.30 0.12 0.06
36" 2.00 1.00 0.50 0.20 0.10
32" 2.40 1.20 0.60 0.24 0.12
28" 3.20 1.60 0.80 0.32 0.16
24" 4.40 2.20 1.10 0.44 0.22
Footcandle Table
Select mounting height and read across for footcandle values of
each isofootcandle line. Distance in units of mounting height.
Mounting Footcandle Values for
Height Isofootcandle Lines
42" 1.20 0.60 0.30 0.12 0.06
36" 2.00 1.00 0.50 0.20 0.10
32" 2.40 1.20 0.60 0.24 0.12
28" 3.20 1.60 0.80 0.32 0.16
24" 4.40 2.20 1.10 0.44 0.22
BRL-XX-100-MH
100-Watt MH
7,900-Lumen Lamp (Coated ED-17)
BRL-XX-100-HPS
100-Watt HPS
8,800-Lumen Lamp (Coated ED-17)
DIMENSIONS
ORDERING INFORMATION
SAMPLE NUMBER: BSL-36-100-MH-MT-BK
Product Family
BSC=Square Bollard
with Clear Lens,
& Square Top
BSL=Square Bollard
with Stacked Louvers,
& Pyramidal Top
BRC=Round Bollard
with Clear Lens,
& Cylindrical Top
BRL=Round Bollard
with Stacked Louvers,
& Dome Top
Fixture Height
24=24"
28=28"
32=32"
36=36"
42=42"
Lamp Wattage
1
26=26W
2
32=32W
2
35=35W
3
42=42W
2
50=50W
57=57W
2
70=70W
100=100W
Lamp Type
MH=Metal
Halide
HPS=High
Pressure
Sodium
CF=Compact
Fluorescent
4
IC=Incandescent
Voltage
5
120=120V
208=208V
240=240V
277=277V
MT=Multi-Tap
wired 277V
6
TT=Triple-Tap
wired 347V
6
Color (add as
suffix/must specify)
7
BK=Black
AP=Grey
BZ=Bronze
WH=Architectural
White
NOTES:
(1)
All HID lamps are medium-base.
(2)
Compact fluorescent only.
(3)
35W HPS available in 120V only.
(4)
BSC/BRC only. MOL length of lamp cannot exceed 7".
(5)
Product also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
(6)
Multi-Tap ballast is 120/208/240/277V wired 277V. Triple-Tap ballast is 120/277/347V wired 347V.
(7)
Other finish colors available. Consult Architectural Colors brochure.
(8)
Polycarbonate lens available on BSC and BRC only.
(9)
Coated lamp standard. Must specify clear lamp if desired.
(10)
Available on BSL and BRL only.
(11)
Location of R1 and R2 option on housing subject to height of luminaire.
Options (add as suffix)
F=Single Fuse (120, 277, or 347V)
FF=Double Fused (208 or 240V)
PC=Button Photocontrol
PL=Polycarbonate Lens
8
L=Lamp Included
9
RB=Royal Blue Glass Jar
10
AB=Aqua Marine Blue Glass Jar
10
HG=Hunter Green Glass Jar
10
RE=Red Glass Jar
10
OR=Orange Glass Jar
10
R1=Provisional cut for GFI Receptacle
11
R2=Installed GFI Receptacle
11
42"
(1067mm)
36"
(914mm)
32"
(813mm)
28"
(711mm)
24"
(610mm)
42"
(1067mm)
36"
(914mm)
32"
(813mm)
28"
(711mm)
24"
(610mm)
8" (Rd.)
(203mm)
7" (Sq.)
(178mm)
8" (Rd.)
(203mm)
7" (Sq.)
(178mm)
STANDARD COLORS
BZ
Bronze
WH
Architectural White
BK
Black
AP
Grey
ordering information
CUSTOMER FIRST CENTER
1121 HIGHWAY 74 SOUTH
PEACHTREE CITY, GEORGIA 30269
770 486 4800
FAX 770 486 4801
Domestic Facilities, USA
Cranbury, New Jersey
Elk Grove Village, Illinois
Grand Prairie, Texas
Ontario, California
Peachtree City, Georgia
International Sales, USA
Peachtree City, Georgia
CANADA
Cooper Lighting
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
905 507 4000
FAX 905 568 7049
Domestic Facilities, Canada
Calgary, Alberta
Chomedey, Laval P.Q.
Cooper Lighting, Inc.
All rights reserved
Printed in USA
The Cooper Lighting Family
Halo
Portfolio
Metalux
Neo-Ray
Corelite
Lumark
McGraw-Edison
Streetworks
Sure-Lites
Fail-Safe
Shaper
Iris
Lumière
MWS
www.cooperlighting.com
ADH020900
Loading...