Cooper Lighting Area Luminaire User Manual

Talon

Area Luminaire

TALON

VERSATILE PERFORMANCE

Talon’’s ingenious blend of performance and
versatility allows application specific
illumination by way of fourteen [14] high
efficiency, field rotatable optical systems.
Offered with the unrivaled Spill Light Eliminator
[SL] optic for areas requiring strict light
trespass control, and the premier Automotive
Front Row [AF] optic for precisely illuminated
automotive dealership front row displays.
Flat glass or sag, vertical lamp or horizontal,
segmented optic or formed, Talon offers a
myriad of optical solutions to satisfy exacting
application requirements.

AREA LUMINAIRE

TABLE OF CONTENTS

Performance + Versatility.................................3

Quality + Durability .........................................5

Control + Efficiency .........................................7

Specification Features ....................................11

Options + Accessories ...................................13

Photometrics..................................................15

Ordering Information [TMU + TLU].................17

SITE + PARKING | ROADWAY | PATH OF EGRESS

IMPENETRABLE FORM

Coupling precise mechanical design with
premium quality materials, the Talon site light
is constructed to sustain the rigors of outdoor
operation. Thick wall die-cast aluminum
construction and channel set silicone gasketing
form an impenetrable IP65 barrier optimizing
optical efficiency and fixture longevity in the
harshest of environments.

INNOVATIVE FOREFRONT

Forward Leaning— two words that describe
Streetworks’ product development process
and relentless commitment to providing
progressive solutions for emerging market
trends. Regardless of the ordinance governing
your site—spill control, emergency egress,
energy efficiency or curfew compliance, the
Talon offers progressive features to address
rigorous regulatory needs.

3
4

PERFORMANCE + VERSATILITY

MAXIMIZE SITE UNIFORMITY

Add sparkle to your site and maximize
pole spacings with sag glass optical
systems offered in both cutoff and
semi-cutoff configurations.
For applications mandating full cutoff,
choose from a complete offering of flat
glass vertical lamp solutions. The vertically
lamped family of optical systems
minimizes light levels directly below
the luminaire while increasing lateral
illumination, maximizing overall site
uniformity. Available in Type III, Area
Round, Area Square, Type IV and
Automotive Front Row [TLU only]
distributions.

OPTICAL VERSATILITY

Never before has a single luminaire
supported this magnitude of optical
choices, touting four [4] distinct families
of optical assemblies, all with compelling
performance. Hydroformed, segmented,
vertical and specialty application optical
systems allow finely tuned site lighting
solutions with unprecedented levels of
uniformity and control.

LEADING SPILL CONTROL

The Spill Light Eliminator [SL] optic is the
industry leader in effective spill light
control, eliminating light beyond one [1]
mounting height behind the pole with no
sacrifice in forward illumination. Used
along site perimeters and property lines,
the Spill Light Eliminator keeps the light
inside and the darkness out.

ROTATIONAL FLEXIBILITY

Maintain uniform site spacing and
fixture orientation with rotatable optical
assemblies. All optics are capable of
rotating in 90° increments allowing for
manipulation of distribution orientation
independent of fixture position.

DARK SKY FRIENDLY

For applications requiring dark sky friendly
solutions, look to full cutoff flat glass
optical assemblies providing focused
illumination with zero uplight and minimal
high angle illumination while retaining
superior uniformity. Available in
hydroformed or segmented Type II, III, IV,
V and SL distributions.

OPTICAL SOLUTIONS AS DIVERSE AS THE ENVIRONMENTS THEY ILLUMINATE.

Exterior lighting requirements continue to grow more stringent with added emphasis on light control and system efficiency. Whether the goal of your

site lighting design is safety, general illumination or highlighting prominent features, Talon offers application-specific optical solutions that provide the

highest level of photometric performance and control.

GET NOTICED

Accel Optics, the Talon’s family of
automotive reflector solutions specialize in
focused front row product displays that
engage the customer, general merchandise
lighting that creates an inviting dealership
appearance emanating safety and security,
and perimeter lighting that precisely
frames the automotive dealership lot.

NOTE: In Flat Glass configurations only.

5
6

QUALITY + DURABILITY

DURABLE CAST CONSTRUCTION

Low-copper alloy die-cast aluminum
construction offers corrosion resistance
while precise tolerance control ensures
tight nesting of the door and housing.
Combining heat extracting reveal channels
with independent optical and electrical
chambers that isolate heat producing
sources, the Talon’s housing design is
both functionally relevant and aesthetically
pleasing.

TOOLLESS ENTRY

Invisibly integrated door retaining latches
allow for a consistent outward aesthetic
while providing maintenance-friendly,
toolless entry into the optical and
electrical chambers. The corrosion­resistant stainless spring steel latch
and door receiver pin create an audible
engagement confirming secure door
closure and fixture sealing.

RIGID OPTICAL CONSTRUCTION

A commitment to optical research and
precision build quality result in unequaled
levels of performance and repeatability.
A rigid box enclosure shields segmented
optical facets on all sides from performance
degrading damage while each facet bank is
secured to both the top and bottom of the
enclosure providing repeatable facet
orientation relative to light center.

PREMIUM MATERIALS

Superior optical design and a commitment
to premium 95% reflective sheet aluminum
make Talon’s segmented reflector family
the benchmark of optical excellence.
Reflector facets are flat and unobstructed
by rivets or other means of attachment
which may cause streaks or striations in
the light distribution. First class
construction and attention to detail
ensure dependable performance in
every installation.

INGRESS PROTECTION

“IP” stands for Ingress Protection and is a
rating system recognized internationally
as the standard for electrical products
and other related technologies. The two
numbers proceeding the “IP” individually
callout the fixture's protection rating
against moisture and airborne
particulates. The channel set silicone
gasketing system incorporated in Talon
is IP65 certified. Dust, insects and
moisture simply have no chance of
penetrating the outer enclosure.

CONFIDENCE-INSPIRING QUALITY BEYOND THE SUM OF ITS PARTS.

From the stainless steel hinges to the rugged housing, every detail of the Talon construction is precisely designed with industry leading craftsmanship.

Heavy-wall die-cast aluminum construction, premium TGIC [triglycidyl isocyanurate] polyester powder coat paint and an IP65 rated optical cavity ensure

Talon can endure the harshest environments.

FINISH OPTIONS

Streetworks’ premium polyester powder coatings are enhanced
TGIC based coatings formulated to withstand extended outdoor
exposure. The powders are designed not only to be functional, but
decorative, combining good film appearance with excellent mechanical
and exterior exposure qualities. Formulated with properties similar to
a standard TGIC, the improved weathering characteristics of premium
TGIC result from the integration of a new polyester resin technology.
These coatings consistently display at least twice the gloss retention
of standard TGIC materials in both weatherometer and QUV testing,
making them ideal for outdoor lighting fixtures and poles. Applied to
a nominal 2.5 mil thickness, Talon’s six (6) standard finishes offer
superior protection against fade and wear.

GREY [AP]

WHITE [WH]

BLACK [BK]

DARK PLATINUM [DP]

BRONZE [BZ]

GRAPHITE METALLIC [GM]

100

96

92

88

84

Percentage To Original

0 6 12 18 24

Color Retention Over Time

Months Exposure

TGIC Streetworksʼ Premium

7
8

CONTROL + EFFICIENCY

LUMINAIRE CLASSIFICATION

The IESNA’’s revised Luminaire Classification System
[TM15-07 revised] creates a new basis of measurement
for site lighting visibility and adjacent property
interaction. This technical memorandum subdivides
the luminaire distribution into smaller angular zones
and subzones to more clearly represent how much
light is emitted at various angles. The values for each
subzone give an indication of the appropriate use for
the luminaire within an application. For dark sky
sensitive areas, the uplight component tells how
much the luminaire will contribute to sky glow.
For applications with strict light trespass regulations,
the back light portion of the distribution helps
determine how much light will reach neighboring
properties. Talon reflector assemblies keep light on
task by contributing as little as 0.0% total upward
illumination and 0.8% total backlight.

Forward Light

Forward Light Low [FL]
Forward Light Mid [FM]
Forward Light High [FH]
Forward Light Very High [FVH]

Back Light

Back Light Low [BL]
Back Light Mid [BM]
Back Light High [BH]
Back Light Very High [BVH]

Uplight

Uplight Low [UL]
Uplight High [UH]

NEIGHBORHOOD AND DARK SKY FRIENDLY

National organizations work to educate the general public on best lighting practices in order to minimize light trespass, reduce sky-glow and improve
nighttime visibility through glare reduction. Experts understand the visual system adapts to surrounding ambient conditions, spurring a move from
universal light level recommendations to a set of custom tailored guidelines for each task based on an application’s lighting zone. When surrounding
conditions are dim, lower levels of light are able to be detected more easily. In these environments, high light level applications can be a source of
discomfort and glare. Careful selection and placement of luminaires eliminates glare and creates a comfortable nighttime environment. Talon’s
assortment of specialty light control optical assemblies combined with a wide array of internal or external house-side shields provide the perfect
solution for every application.

Uplight

180°

UH

100° 100°

UL UL

90° 90°

BVH FVH

80° 80°

BH FH

60° 60°

Back Forward

BM FM

BL FL

30° 30°

0°

[nadir]

Glare

Light Trespass

Uniform Task Illumination

Property

Line

STEPPING UP TO THE CHALLENGE.

As visual research advances so too the core understanding of how light interacts with surrounding communities and nocturnal environments.

Utilizing this knowledge, Federal programs, national organizations and industry leaders institute guidelines for illuminating an area safely and

securely while reducing energy, eliminating spill light and minimizing glare. Talon steps up to the challenge, offering innovative solutions to regulatory

compliance issues.

ENERGY EFFICIENCY

With the Federal Energy Independence and Security Act effective January 1, 2009, states are rapidly adopting energy legislation limiting the use of probe
start sources in favor of higher efficiency options. Pulse start technology is being embraced for its efficacy, extended life, high lumen maintenance, and
color consistency. The increased color rendering of a pulse start lamp improves visibility and heightens the overall safety and security of the site. Higher
lumen maintenance levels reduce the number of fixtures needed to achieve a consistent light level over the fixture’’s installed life. Initial savings are
compounded by decreased energy consumption and less frequent maintenance requirements. By supporting a full array of both horizontal and vertical
lamp distributions, Talon offers the broadest selection of energy saving pulse start solutions.

CURFEW COMPLIANCE

Certain regulatory documents incorporate energy saving measures beyond standard source efficacy, including curfew regulations calling for close
of business site lighting power reduction. When alternating luminaires are turned off to accomplish the reduction, site lighting uniformity is greatly
reduced, compromising visibility and the feeling of security. The Talon Hi/Low [HL] option enables curfew compliance through an integrated
dimming relay internal to the housing that reduces power while closely maintaining critical-to-safety site lighting uniformity levels.

120

Lumen Output Over Time

100

80

60

40

Lumen Output [In Thousands]

20

0

0 2000 4000 6000 8000 10000

12000 14000 1800016000

Hours of Operation [4000 hours ~ 1 year]

750W Pulse Start MH 1000W Probe Start MH

Alternating Fixture Switching

Hi/Low Dimming

11
12

SPECIFICATION FEATURES

MOUNTING

Extruded 8" [TMU Talon Medium] or 10
1/2" [TLU Talon Large] aluminum arm
includes internal bolt guides allowing
for easy positioning of fixture during
installation to pole or wall surface.
Standard single carton packaging of
housing, square pole arm and round
pole adapter for contractor friendly
arrival of product on site.

CONSTRUCTION

Heavy-wall, die-cast low-copper alloy
aluminum construction with integral
reveal channels along top surface of
housing to promote heat extraction and
prolong electrical component life. Internal
cast-in wall separates optical and electrical
chambers, allowing components to operate
cooler. One-piece heavy-wall, die-cast
aluminum door frame with integral cast-in
gasket channel seals optical chamber to an
IP65 rating. Stainless steel latches and
hinges.

OPTICAL SYSTEMS

Choice of fourteen [14] high efficiency
optical systems utilizing horizontal and
vertical lamp orientations, including five [5]
optional high efficiency segmented optical
systems constructed of premium 95%
reflective anodized aluminum sheet.
Optical segments are rigidly mounted
inside a thick gauge aluminum housing for
superior protection. All segment faces are
clean of rivet heads, tabs or other means
of attachment which may cause streaking
in the light distribution. Standard with
mogul-base socket for HPS and
175-1000W MH. Standard with
medium-base socket for 150W MH and
below. All optical modules feature quick
disconnect wiring plugs and are field
rotatable in 90° increments.

ELECTRICAL

TMU offered standard with ballast and
related electrical componentry hard
mounted to die-cast housing for optimal
heat transfer and improved operating
efficiency. TMU optional and TLU standard,
electrical componentry mounted to a
swing-down galvanized steel power tray
with integral handle. Electrical disconnects
allow tray to be completely removed from
the housing providing ample hand and
tool room for attachment of fixture during
installation.

Lamp Standard Door 70-200W 250-400W Lamp 250-1000W

Distribution Orientation Configuration Lens Type Lens Type Orientation Lens Type
2F

Horizontal Recessed Flat/Sag Flat/Sag Horizontal Flat/Sag

2S Horizontal Recessed Flat/Sag Flat/Sag Horizontal Flat/Sag
3F Horizontal Recessed Flat/Sag Flat/Sag Horizontal Flat/Sag
3S Horizontal Recessed Flat/Sag Flat/Sag Horizontal Flat/Sag
4F Horizontal Recessed Flat/Sag Flat/Sag Horizontal Flat/Sag
4S Horizontal Recessed Flat/Sag Flat/Sag Horizontal Flat/Sag
5F Horizontal Recessed Flat/Sag Flat/Sag Horizontal Flat/Sag
5S Horizontal Recessed Flat/Sag Flat/Sag Horizontal Flat/Sag
SL Horizontal Recessed Flat/Sag Flat/Sag Horizontal Flat/Sag
AR Vertical Deep Flat/Sag Sag Vertical Flat/Sag
AS Vertical Deep Flat/Sag Sag Vertical Flat/Sag
3V Vertical Deep Flat/Sag Sag Vertical Flat/Sag
4V Vertical Deep Flat/Sag Sag Vertical Flat/Sag
AF Horizontal Recessed Flat/Sag Flat/Sag Vertical Flat/Sag

TALON MEDIUM [TMU] TALON LARGE [TLU]

FINISH

Housing and arm finished in a 5 stage
premium TGIC polyester powder coat
paint, 2.5 mil nominal thickness for
superior protection against fade and
wear. Standard colors include black,
bronze, grey, white, dark platinum,
and graphite metallic.

MOUNTING CONFIGURATIONS

Talon is available in seven [7] unique luminaire mounting configurations.

NOTE: In Flat Glass configurations only.

DRILLING PATTERNS
Type “M” Wall Mount

Certifications

GM

Graphite Metallic

WH

White

DP

Dark Platinum

BZ

Bronze

BK

Black

AP

Grey

Wall Mount Arm Mount Single

E.P.A.
TMU

Recessed Door 1.22
Deep Door 1.45

TLU 2.51

Arm Mount 2 @ 180°
E.P.A.
TMU

Recessed Door 2.44
Deep Door 2.90

TLU 5.02

Arm Mount 2 @ 90°
E.P.A.
TMU

Recessed Door 2.44
Deep Door 2.90

TLU 5.02

Arm Mount 3 @ 120°
E.P.A.
TMU

Recessed Door 3.23
Deep Door 3.92

TLU 6.85

Arm Mount 3 @ 90°
E.P.A.
TMU

Recessed Door 3.23
Deep Door 3.92

TLU 6.85

Arm Mount 4 @ 90°
E.P.A.
TMU

Recessed Door 3.63
Deep Door 4.43
TLU 7.77

IP65 Rated

CSA Listed

U.L. 1598 Listed

25°C Ambient

ISO 9001

2 5/16"

[59mm]

3/4" [20mm]
dia. hole

2 7/16" [124mm]

4 7/8" [124mm]

[2] 5/8" [16mm]
dia. holes

6 1/2"

[165mm]

8"

[203mm]

12"

[305mm]

4 7/8"

[124mm]

10 1/2"

[267mm]

9/16" [14mm]

Dia. Hole [4]

[Arm Mount] [WM]

13
14

OPTIONS + ACCESSORIES

ARM MOUNT

Standard 8" [TMU] or 10 1/2" [TLU]
extruded aluminum arm features internal
bolt guides for twin support rods. Round
pole mounting accommodated by utilizing
provided round pole adapter between the
fixture arm and pole shaft.

EXTERNAL MAST ARM ADAPTER [MS]
Cast aluminum mast arm adapter secures
fixture head to nominal 2" [2 3/8" O.D. pipe
size] horizontal steel tenon arm. Adapter
casting slip fits over tenon arm and is
secured via two [2] stainless steel bolts.

WALL BRACKET [WM]
Wall bracket secured to wall via four [4] lag
bolts [lag bolts supplied by other]. Wall
bracket kit includes 1/2" thick steel adapter
plate, a 8" [TMU] or 10 1/2" [TLU] machined
extruded aluminum arm and two [2] fixture
support rods.

TENON ADAPTER

Tenon adapters available to slip fit over poles
equipped with nominal 2" pipe size steel tenon
[2 3/8" O.D., 4" length] or nominal 3" pipe size
steel tenons [3 1/2" O.D., 5" length]. Adapter
secures to tenon via six [6] stainless steel
bolts. For complete configuration availability,
see Tenon Adapters on page 14.

POLYCARBONATE VANDAL SHIELD [V]
Internally mounted 3/16" thick molded
polycarbonate lens, treated with UV inhibitor
to discourage the gradual discoloration that
results from exposure to sunlight and UV
radiating sources.

QUARTZ RESTRIKE [Q + E]
Optional quartz restrike [Q] energizes auxiliary
quartz lamp upon power reactivation and
extinguishes once HID lamp re-ignites.
Quartz restrike with time delay [E] adds
cold start activation.

PHOTOCONTROL RECEPTACLE [4]
Fixtures available with gasketed photocontrol
receptacle for mounting a standard NEMA
photocontrol [ordered separately]. Medium
housing also available with a button-style
photocontrol [P].

INTERNAL HOUSE-SIDE SHIELD [B]
Internal house-side shield reduces light
concentration behind the pole while
maintaining street side efficiency. Internal
house-side shields available on Type II, III, IV
and AF distributions.

EXTERNAL HOUSE-SIDE SHIELD

[MA1213-XX + MA1214-XX]
External house-side shield provides sharp
cutoff behind the pole and shields the lamp
from direct view. Mounted to the door frame
via double-sided VHB adhesive [TMU] or three
[3] stainless steel fasteners [TLU]. Rotatable in
90° increments, the external house-side shield
provides industry leading glare and spill light
control.

[MS]

OPTIONS

[Factory installed and shipped complete with luminaire]

Electrical
1=Single Fuse [120, 277 or 347V]
2=Double Fuse [208, 240 or 480V]
3=3 Place Terminal Block
4=NEMA Twistlock Photocontrol Receptacle
E=Quartz Restrike w/Delay [Also Strikes at Cold Start]
H=Plug-in Starter Receptacle
HL=Hi/Low Dimming [Vertical Optics Only]
P=Button Type Photocontrol [TMU Only]
Q=Quartz Restrike [Hot Restrike Only]
R=Removable Power Tray [Standard on TLU]
U=U.L. Listed

Shields + Doors
B=Internal House Side Shield
DD=Deep Door [TMU Only]
V=Polycarbonate Vandal Shield [TMU Only]

Mounting
DM=Direct Mount for Round or Square Pole
DW=Direct Wall Mount Kit
MS=External Mast Arm Adapter [TMU Only]
WM=Wall Bracket with Arm

ACCESSORIES

[Field installed and shipped independent of luminaire]

Electrical
OA/RA1016=NEMA Photocontrol [105-285V]
OA/RA1027=NEMA Photocontrol [480V]
OA/RA1201=NEMA Photocontrol [347V]
OA/RA1013=Shorting Cap

Tenon Adapters
MA1010-XX=Single Tenon Adapter for 3 1/2" O.D. Tenon
MA1011-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1012-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1013-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1014-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1015-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1016-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1017-XX=Single Tenon Adapter for 2 3/8" O.D. Tenon
MA1018-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1019-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1045-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1048-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1049-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon

Shields
MA1213-XX=External House-side Shield Kit [TMU Only]
MA1214-XX=External House-side Shield Kit [TLU Only]

DEEP DOOR [DD]

Medium housing vertically lamped optics are
shipped standard with Deep Door. For sites
combining horizontal and vertical optics, specify
the Deep Door [DD] option on horizontal lamp
fixtures to maintain a uniform outward aesthetic.
Reflector shifted downward toward the lens to
maintain optimal photometric performance
[TMU only].

Horizontal optic in recessed door position.

[MA1213 + MA1214]

[B]

[4]

[Tenon Adapter]

[V]

[Q + E]

Horizontal optic in deep door position.

15
16

PHOTOMETRICS [Complete IES files available at www.cooperlighting.com]

FOOTCANDLE TABLE

Select mounting height and read across for
footcandle values of each isofootcandle
line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

AB C D E

100W [3F]

15' 3.40 1.70 0.86 0.34 0.17

20' 2.00 1.00 0.50 0.20 0.10

25' 1.28 0.64 0.32 0.13 0.06

150W [4V]/175W [3V/AS]
15' 1.70 0.85 0.34 0.17 --

20' 1.00 0.50 0.20 0.10 --

25' 0.64 0.32 0.13 0.06 --

TMU10SXX3FF

100-Watt HPS
9,500-Lumen Clear Lamp
Type III Formed
Flat Glass

TMU15SXX4VS

150-Watt HPS
16,000-Lumen Clear Lamp
Type IV Vertical
Sag Glass

TMU17MXX3VF

175-Watt MH
14,000-Lumen Clear Lamp
Type III Vertical
Flat Glass

TMU17MXXASF

175-Watt MH
14,000-Lumen Clear Lamp
Area Square
Flat Glass

FOOTCANDLE TABLE

Select mounting height and read across for
footcandle values of each isofootcandle
line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

AB C D E

250W [5F/SL]/400W [3S]

25' 2.88 1.44 0.72 0.29 0.14

30' 2.00 1.00 0.50 0.20 0.10

35' 1.46 0.73 0.37 0.15 0.07

250W [AS]
25' 1.44 0.72 0.29 0.14 --

30' 1.00 0.50 0.20 0.10 --

35' 0.73 0.37 0.15 0.07 --

TMU25SXX5FF

250-Watt HPS
30,000-Lumen Clear Lamp
Type V Formed
Flat Glass

TMU25SXXASS

250-Watt HPS
30,000-Lumen Clear Lamp
Area Square
Sag Glass

TMU25MXXSLF

250-Watt MH
20,500-Lumen Clear Lamp
Spill Light Eliminator
Flat Glass

TMU40MXX3SF

400-Watt MH
36,000-Lumen Clear Lamp
Type III Segmented
Flat Glass

FOOTCANDLE TABLE

Select mounting height and read across for
footcandle values of each isofootcandle
line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

AB C D E

400W [3V/4V/5S/AR]

20' 3.00 1.50 0.75 0.30 0.15

25' 2.00 1.00 0.50 0.20 0.10

30' 1.38 0.69 0.34 0.13 0.06

TMU40MXX3VS

400-Watt MH
36,000-Lumen Clear Lamp
Type III Vertical
Sag Glass

ABCDE

TMU40MXX4VS

400-Watt MH
36,000-Lumen Clear Lamp
Type IV Vertical
Sag Glass

TMU40MXX5SF

400-Watt MH
36,000-Lumen Clear Lamp
Type V Segmented
Flat Glass

TMU40MXXARF

400-Watt MH
36,000-Lumen Clear Lamp
Area Round
Flat Glass

FOOTCANDLE TABLE

Select mounting height and read across for
footcandle values of each isofootcandle
line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

AB C D E

400W [2F/3VB/5F/AR]

25' 2.88 1.44 0.72 0.29 0.14

30' 2.00 1.00 0.50 0.20 0.10

35' 1.46 0.73 0.37 0.15 0.07

TMU40SXX2FF

400-Watt HPS
50,000-Lumen Clear Lamp
Type II Formed
Flat Glass

TMU40SXX3VSB

400-Watt HPS
50,000-Lumen Clear Lamp
Type III Vertical Sag Glass
Internal House-side Shield

TMU40SXX5FF

400-Watt HPS
50,000-Lumen Clear Lamp
Type V Formed
Flat Glass

TMU40SXXARS

400-Watt HPS
50,000-Lumen Clear Lamp
Area Round
Sag Glass

ABCDE

AB C DE

ABCD

AB CD

AB CD

ABCDE

AB CD

ABCDE

AB C DE

ABCDE

ABCDE

AB CDE

ABCDE

ABCDE

ABCDE

PHOTOMETRICS [Complete IES files available at www.cooperlighting.com]

FOOTCANDLE TABLE

Select mounting height and read across for
footcandle values of each isofootcandle
line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

AB C D E

400W [3F/4F/3V]

25' 2.88 1.44 0.72 0.29 0.14

30' 2.00 1.00 0.50 0.20 0.10

35' 1.46 0.73 0.37 0.15 0.07

400W [AR]
25' 1.44 0.72 0.29 0.14 --

30' 1.00 0.50 0.20 0.10 --

35' 0.73 0.37 0.15 0.07 --

TLU40SXX3VF

400-Watt HPS
50,000-Lumen Clear Lamp
Type III Vertical
Flat Glass

TLU40MXX3FF

400-Watt MH
36,000-Lumen Clear Lamp
Type III Formed
Flat Glass

TLU40SXX4FF

400-Watt HPS
50,000-Lumen Clear Lamp
Type IV Formed
Flat Glass

TLU40MXXARS

400-Watt MH
36,000-Lumen Clear Lamp
Area Round
Sag Glass

FOOTCANDLE TABLE

Select mounting height and read across for
footcandle values of each isofootcandle
line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

AB C D E

400W [AR]/1000W [3F]

25' 2.88 1.44 0.72 0.29 0.14

30' 2.00 1.00 0.50 0.20 0.10

35' 1.46 0.73 0.37 0.15 0.07

1000W [SL/3V]
25' 7.20 2.88 1.44 0.72 0.29

30' 5.00 2.00 1.00 0.50 0.20

35' 3.65 1.46 0.73 0.37 0.15

TLU40SXXARF

400-Watt HPS
50,000-Lumen Clear Lamp
Area Round
Flat Glass

TLU40SXXSLF

400-Watt HPS
50,000-Lumen Clear Lamp
Spill Light Eliminator
Flat Glass

TLU91SXX3FF

1000-Watt HPS
135,000-Lumen Clear Lamp
Type III Formed
Flat Glass

TLU91MXX3VF

1000-Watt MH
110,000-Lumen Clear Lamp
Type III Vertical
Flat Glass

FOOTCANDLE TABLE

Select mounting height and read across for
footcandle values of each isofootcandle
line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

AB C D E

1000W [3V-EHS (HPS)/5F]

25' 2.88 1.44 0.72 0.29 0.14

30' 2.00 1.00 0.50 0.20 0.10

35' 1.46 0.73 0.37 0.15 0.07

1000W [3V-EHS (MH)/4VB]
25' 7.20 2.88 1.44 0.72 0.29

30' 5.00 2.00 1.00 0.50 0.20

35' 3.65 1.46 0.73 0.37 0.15

TLU91MXX3VFEHS

1000-Watt MH
110,000-Lumen Clear Lamp
Type III Vertical Flat Glass
External House-side Shield

TLU91SXX3VFEHS

1000-Watt HPS
135,000-Lumen Clear Lamp
Type III Vertical Flat Glass
External House-side Shield

TLU91MXX4VFB

1000-Watt MH
110,000-Lumen Clear Lamp
Type IV Vertical Flat Glass
House-side Shield

TLU91SXX5FF

1000-Watt HPS
135,000-Lumen Clear Lamp
Type V Formed
Flat Glass

FOOTCANDLE TABLE

Select mounting height and read across for
footcandle values of each isofootcandle
line. Distance in units of mounting height.

Mounting Footcandle Values for
Height Isofootcandle Lines

AB C D E

1000W [4V/SL/AS]

25' 2.88 1.44 0.72 0.29 0.14

30' 2.00 1.00 0.50 0.20 0.10

35' 1.46 0.73 0.37 0.15 0.07

1000W [AF]
25' 30.00 10.00 3.00 1.00 0.20

27' 25.50 8.50 2.55 0.85 0.17
30' 20.70 6.90 2.07 0.69 0.14

TLU91SXX4VFB

1000-Watt HPS
135,000-Lumen Clear Lamp
Type IV Vertical Flat Glass
Internal House-side Shield

TLU91MXXSLF

1000-Watt MH
110,000-Lumen Clear Lamp
Spill Light Eliminator
Flat Glass

TLU91MXXASF

1000-Watt MH
110,000-Lumen Clear Lamp
Area Square
Flat Glass

ABCDE

TLU91MXXAFF

1000-Watt MH
110,000-Lumen Clear Lamp
Automotive Front Row
Flat Glass

ABCDE

ABC DE

AB C DE

ABC ED

ABC DE

ABC DE

AB C D

ABCDE

AB CDE

ABC D E

ABC D F

ABCDE

ABCDE

ABCD E

ABCDF

17
18

TMU TALON MEDIUM

ORDERING INFORMATION

SAMPLE NUMBER: TMU40SWW3SF

VOLTAGE
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
N=Multi-Tap

wired 277V

W=Multi-Tap

wired 120V

V=Multi-Tap

wired 240V

BALLAST TYPE
C=CWI
H=Reac./HPF
K=10KV CWA
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA

DISTRIBUTION
Horizontal Lamp
2F=Type II Formed
2S=Type II Segmented
3F=Type III Formed
3S=Type III Segmented
4F=Type IV Formed
4S=Type IV Segmented
5F=Type V Formed
5S=Type V Segmented
SL=Spill Light Eliminator
AF=Automotive Front Row
Vertical Lamp
3V=Type III Vertical

5

4V=Type IV Vertical

5

AR=Area Round

5

AS=Area Square

5

LENS TYPE
F=Flat Glass
S=Sag Glass

COLOR

[add as suffix
/must specify]

WH=White
BK=Black
AP=Grey
BZ=Bronze
DP=Dark Platinum
GM=Graphite Metallic

PRODUCT
FAMILY

1

TMU=Talon

Site
Medium

LAMP TYPE
S=High

Pressure
Sodium

R=Super Metal

Halide

M=Metal

Halide

P=Pulse Start

Metal Halide

LAMP
WATTAGE

2

70=70W
10=100W
15=150W
17=175W
20=200W
25=250W
32=320W

3, 4

35=350W

3, 4

40=400W

4

24=250/400W

wired 250W

42=250/400W

wired 400W

OPTIONS [add as suffix]
1=Single Fuse [120, 277 or 347V]

6

2=Double Fuse [208, 240 or 480V]

6

3=Three Place Terminal Block
4=NEMA Twistlock Photocontrol Receptacle
B=Internal House-side Shield

7

DD=Deep Door
DM=Direct Mount for Round or Square Pole
DW=Direct Wall Mount Kit
E=Quartz Restrike w/Delay [Also Strikes at Cold Start]

8

H=Plug-in Starter Receptacle
HL=Hi/Low Dimming

9

L=Lamp Included
MS=External Mast Arm Adapter
P=Button Type Photocontrol [120, 208, 240 or 277V]

6

Q=Quartz Restrike [Hot Restrike Only]

8

R=Removable Power Tray
U=U.L. Listed
V=Polycarbonate Vandal Shield
WM=Wall Bracket with 8" Arm

OPTIONS + ACCESSORIES [must be ordered in alphanumeric order]

ACCESSORIES [order separately/replace XX with color designation]

OPTIONS +
ACCESSORIES

[See Below]

NOTES: 1 8" arm and round pole adapter included with fixture. 2 Standard with mogul-base socket for HPS and 100-400W MH. Standard with medium-base socket for 70W MH. 3 320/350W Pulse Start Metal Halide

lamp only. 4 Requires reduced envelope lamp. 5 Vertical lamp optics ship standard with deep door. Flat glass not available for 250W—400W. 6 Must specify voltage. 7 House-side shield not available on 5S,
5F, AS, AR and SL optics. 8 Quartz options not available with SL and AF optics. 9 Requires vertical lamp orientation. Provides 24V low voltage leads used in dimming controls. 10 Specifications and
dimensions subject to change without notice.

Lamp Type Wattage

Metal Halide

175, 250, 400W

Pulse Start Metal Halide

70, 100, 150, 175, 200, 250, 320, 350, 400W

Super Metal Halide

175, 250, 400W

High Pressure Sodium 70, 100, 150, 250, 400W

DIMENSIONS

WATTAGE TABLE

IP65 Rated

25° C Ambient Temperature

U.L. 1598 Listed

CSA Listed

ISO 9001

FCO [Full Cutoff] Flat Glass Only

CERTIFICATIONS

STANDARD COLORS

GM

Graphite Metallic

WH

White

DP

Dark Platinum

BZ

Bronze

BK

Black

AP

Grey

DRILLING PATTERNS

TYPE “M” WALL MOUNT

Effective Projected Area

Recessed Door w/o Arm: 0.79

Deep Door w/o Arm: 1.02

8" Arm: 0.43

EPA

Approximate Net Weight

Recessed Door 47 lbs. [21.79 kgs.]

Deep Door 52 lbs. [23.63 kgs.]

SHIPPING DATA

OA/RA1016=NEMA Photocontrol [105-285V]
OA/RA1027=NEMA Photocontrol [480V]
OA/RA1201=NEMA Photocontrol [347V]
OA/RA1013=Shorting Cap
MA1010-XX=Single Tenon Adapter for 3 1/2" O.D. Tenon
MA1011-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1012-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1013-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1014-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1015-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1016-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1017-XX=Single Tenon Adapter for 2 3/8" O.D. Tenon
MA1018-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1019-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1045-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1048-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1049-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1213-XX=External House-side Shield Kit [EPA=0.38]

8"

[203mm]

11 7/8"

[302mm]

8"

[203mm]

16 1/4" [412mm]

1 3/4"

[45mm]

23 1/4" [590mm]

2 5/16"

[59mm]

3/4" [20mm]
dia. hole

2 7/16" [124mm]

4 7/8" [124mm]

[2] 5/8" [16mm]
dia. holes

12"

[305mm]

4 7/8"

[124mm]

10 1/2"

[267mm]

6 1/2"

[165mm]

8"

[203mm]

9/16" [14mm]

Dia. Hole [4]

COLOR

[add as suffix
/must specify]

WH=White
BK=Black
AP=Grey
BZ=Bronze
DP=Dark Platinum
GM=Graphite Metallic

TLU TALON LARGE

ORDERING INFORMATION

SAMPLE NUMBER: TLU91SWW3VF

BALLAST TYPE
C=CWI
H=Reac./HPF
K=10KV CWA
M=Mag. Reg.
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA

VOLTAGE
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
N=Multi-Tap

wired 277V

W=Multi-Tap

wired 120V

V=Multi-Tap

wired 240V

DISTRIBUTION
Horizontal Lamp
2F=Type II Formed
2S=Type II Segmented

4

3F=Type III Formed
3S=Type III Segmented

4

4F=Type IV Formed
4S=Type IV Segmented

4

5F=Type V Formed
5S=Type V Segmented

4

SL=Spill Light Eliminator

3

Vertical Lamp
3V=Type III Vertical
4V=Type IV Vertical
AR=Area Round
AS=Area Square
AF=Automotive Front Row

LENS TYPE
F=Flat Glass
S=Sag Glass

PRODUCT
FAMILY

1

TLU=Talon

Site
Large

LAMP TYPE
S=High

Pressure
Sodium

R=Super Metal

Halide

M=Metal

Halide

P=Pulse Start

Metal Halide

LAMP
WATTAGE
25=250W
32=320W

2

35=350W

2

40=400W
75=750W
87=875W

2

91=1000W

3

Lamp Type Wattage

Metal Halide

250, 400, 1000W

Pulse Start Metal Halide

250, 320, 350, 400, 450, 750, 875, 1000W

Super Metal Halide

250, 400, 750, 1000W

High Pressure Sodium 250, 400, 1000W

OPTIONS [add as suffix]
1=Single Fuse [120, 277 or 347V]

5

2=Double Fuse [208, 240 or 480V]

5

3=Three Place Terminal Block
4=NEMA Twistlock Photocontrol Receptacle
B=Internal House-side Shield

6

DM=Direct Mount for Pole
E=Quartz Restrike w/Delay [Also Strikes at Cold Start]

7

H=Plug-in Starter Receptacle

8

HL=Hi/Low Dimming

9

L=Lamp Included
Q=Quartz Restrike [Hot Restrike Only]

7

U=U.L. Listed
WM=Wall Bracket with 10 1/2" Arm

OA/RA1016=NEMA Photocontrol [105-285V]
OA/RA1027=NEMA Photocontrol [480V]
OA/RA1201=NEMA Photocontrol [347V]
OA/RA1013=Shorting Cap
MA1010-XX=Single Tenon Adapter for 3 1/2" O.D. Tenon
MA1011-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1012-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1013-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1014-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1015-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1016-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1017-XX=Single Tenon Adapter for 2 3/8" O.D. Tenon
MA1018-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1019-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1045-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1048-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1049-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1214-XX=External House-side Shield Kit [EPA=0.94]

OPTIONS + ACCESSORIES [must be ordered in alphanumeric order]

DIMENSIONS

WATTAGE TABLE

IP65 Rated

25° C Ambient Temperature

U.L. 1598 Listed

CSA Listed

ISO 9001

FCO [Full Cutoff] Flat Glass Only

CERTIFICATIONS

DRILLING PATTERNS

TYPE “M” WALL MOUNT

ACCESSORIES [order separately/replace XX with color designation]

OPTIONS +
ACCESSORIES

[See Below]

NOTES: 1 10 1/2" arm and round pole adapter included with fixture. 2 320/350/875W Pulse Start Metal Halide lamp only. 3 Requires reduced envelope lamp. 4 Maximum wattage on segmented optical

distributions is 400W. 400W Metal Halide lamp must use reduced envelope ED-28 lamp. 5 Must Specify Voltage. 6 House-side shield not available on 5S, 5F, AS, AR and SL optics. 7 Quartz options not
available with SL and AF optics. 8 Not available in 1000W. 9 Requires vertical lamp orientation. Provides 24V low voltage leads used in dimming control. 10 Specifications and dimensions subject to change
without notice.

STANDARD COLORS

GM

Graphite Metallic

WH

White

DP

Dark Platinum

BZ

Bronze

BK

Black

AP

Grey

Effective Projected Area

Without Arm: 1.82

10 1/2" Arm: 0.6

EPA

Approximate Net Weight

400W 91 lbs. [41.36 kgs.]

1000W 98 lbs. [44.54 kgs.]

SHIPPING DATA

14 1/8"

[359mm]

10 1/2"

[267mm]

21 5/8" [549mm]

3 1/8"

[79mm]

31" [787mm]

2 5/16"

[59mm]

3/4" [20mm]
dia. hole

2 7/16" [124mm]

4 7/8" [124mm]

[2] 5/8" [16mm]
dia. holes

4 7/8"

[124mm]

10 1/2"

[267mm]

6 1/2"

[165mm]

8"

[203mm]

12"

[305mm]

9/16" [14mm]

Dia. Hole [4]

Cooper Lighting

Customer First Center
1121 Highway 74 South
Peachtree City, GA 30269

P: 770-486-4800
F: 770-486-4801

www.cooperlighting.com

International Sales, USA

Cooper Lighting
1121 Highway 74 South
Peachtree City, GA 30269

P: 770-486-4800
F: 770-486-4801

Canada

Cooper Lighting
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8

P: 905-507-4000
F: 905-568-7049

The Cooper Lighting Family

Halo
Metalux
Lumark
Sure-Lites
Neo-Ray
Corelite
Portfolio
Iris
Shaper
io
Lumière
Invue
McGraw-Edison
Streetworks
Fail-Safe
MWS
DLS
RSA
Ametrix

Printed in USAADW080322

Domestic Facilities

Cranbury, New Jersey
Elk Grove Village, Illinois
Irving, Texas
Ontario, California
Peachtree City, Georgia

Canadian Facility

Calgary, Alberta T2E 7V9

Cooper Industries, Ltd.

600 Travis, Ste. 5800
Houston, TX 77002-1001
P: 713-209-8400
www.cooperindustries.com

Cooper Lighting, Streetworks, Talon and Accel Optics are valuable trademarks of Cooper Industries in the United States and other countries.
You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries.