Cooper Lighting AR7020, MR1650, MR1675, AR7050, MLU222 User Manual

T

hermal Protector

6.75"

Lamp Cell 1

Lamp Cell 3 Lamp Cell 4

Lamp Cell 2

Lamp Cell 2Lamp Cell 1

A

B

C

E
D

Butterfly Brackets 
for Black Iron Mounting

Trim
Detail

0.75" Trim

380º x 45º locking
angular adjustment
45º visual cut-off


A

romat® Electronic

B

allasts and/or 

E

lectronic or 

M

agnetic 

T

ransformers

RECESSED MIXED LAMP USAGE

___

___

___

___

___

___

___

___

___

LAMP GROUP 2

DESCRIPTION:

An adjustable fixture with mixed
lamp types suitable for multiple
downlighting applications with one
point of electrical entry. Powder coat
finish on housing & lamp assembly.

CONSTRUCTION:

Housing, Plaster Frame & Trim
Assembly: 18 gauge CRS. J-Box
Assembly: 16 gauge CRS (galva­nized). Fixture utilizes a removable
trim sleeve to provide a 0.75” trim
around the ceiling opening and to
help conceal the inner hardware of
the fixture from sight below the ceil­ing. Can accommodate 0.50” to 1.00”
ceiling thickness.

LAMP ASSEMBLY:

Four lamps mounted in adjustable
bezels in a 2 x 2 square configura­tion. Each lamp can accept up to
two optical accessories. 380º x 45º
locking lamp adjustment. Provides
45º visual cut-off.

SYSTEM PROTECTION:

Thermal protection provided to
guard against overheating, and mis­use of insulation over and around
fixture. Vent holes in housing pro­vide cooler operation

Configure with any combination of MR16, AR70, AR111,

PAR16, PAR20, PAR20MH, PAR30 or PAR30MH lamps.

Dimensions

A

Overall LengthBOverall HeightCAperture LengthDAperture WidthEOverall Width

w/ Magnetic Transformer 30.94” 9.10” 13.50” 13.38” 16.50” 14.37” x 14.46”

w/ Electronic Transformer 25.94” 9.10” 13.50” 13.38” 16.50” 14.37” x 14.46”

Catalog #
Type
Project

COMBOLIGHT®MLU Series

FOUR (4) Light Square Recessed

Multi-Lamp Luminaire w/ .75” Trim

Group 2 - Mixed Lamp Usage

New Construction

Ceiling Cut-Out

ELECTRICAL:

Integral Aromat® electronic metal
halide ballsts for metal halide lamps.
Integral magnetic or electronic
transformers for low voltage lamps.
Fused and short circuit protection.
Junction box is UL listed for through
branch wiring, (access above ceiling
not required) for 8 #12, 90°C supply
conductors or 60°C for end of run.
Ballasts/Transformers and electrical
accessible through ceiling opening.

ALL RSA COMBOLIGHT PRODUCTS
ARE MADE IN THE U.S.A.

Other Adders
CC -

Two Circuit

CP - Chicago Plenum

Optional Accessories - Details on Other Side

Baffle Snoots Louvers Lenses

Cat. # / Description

MLU222 - 4 Light Square

Recessed Combo
w/ Mixed Lamp
Usage

ORDERING EXAMPLE:

= Four Light Square Recessed Mixed Lamp Usage - Two AR111 50W with Two PAR30 - White Trim - Black Interior - Regular Yoke Lamp Holder -

Electronic Transformers - 120 Volt

Available

Lamps

Cell 1 Cell 2 Cell 3 Cell 4

Cell 1 Cell 2 Cell 3 Cell 4 Trim Finish

MLU222 AR11150 AR11150 PAR30 PAR30 WH BK YK ELC 120

MR1650 - MR16 12V 50W AR11135 - AR111 12V 35W PAR16 - PAR16 120V PAR30MH39-PAR30MH 39W
MR1675 - MR16 12V 75W AR11150 - AR111 12V 50W PAR20 - PAR20 120V PAR30MH70 - PAR30MH 70W
AR7020 - AR70 12V 20W AR11175 - AR111 12V 75W PAR30-PAR30 120V
AR7050 - AR70 12V 50W AR111100 - AR111 12V 100W PAR20MH39-PAR20MH 39W

Interior Finish Lamp Holder Transformer Voltage

BK - Black BK - Black YK - Regular Yoke ELC - Electronic 120 - 120 Volt
WH - White WH - White RT - Retractable Yoke MAG - Magnetic 277 - 277 Volt

For use with low
voltage lamps only.
Transformer types
may not be mixed.

S - Silver S - Silver DG - Double Gimbal
PT - Custom PT - Custom
TR - Trimless

SPECIFY -

MLU222

(see table above)

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]