Page 1
Vault
These installation instructions are valid with the above Ametrix styles.
C-Scroll
Roundel
Installation Instructions
Sheet 1 of 3
Large, INDOOR
P2R
(Pendant, 2-way, Remote ballast)
Visor and Non-Visor
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
: Before starting any work ensure
Do not
Exploded view and part call-out
Canopy
1/4-20 x4"
Hex bolt
(2x)
Fixture head
assembly
#8-32 x3/8"
Set screw
(2x)
Cover plate
(2x)
Attention:
Large fixtures require additional bracing/structure
around J-box to support fixture.
2
1/4-20 x4
Hex bolts
(2x)
Wiring the fixture
Cover plate
1
3/8" fasteners
(by others)
#8-32 x3/8"
Set screw
(2x)
Cover plate
1. Remove both 1/4-20 x4 hex bolts from bottom of pendant.
2. Remove both #8-32 x3/8" set screws and allow canopy to
slide down pendant.
3. Run wires from J-box into pendant, ensure there is enough
wire to reach cover plate.
4. Using appropriate fasteners, secure fixture to ceiling. Use
additional bracing around J-box to support fixture.
. Replace canopy and secure using both set screws.
5
3
Mounting pendant to ceiling
J-box
(by others)
Canopy
1/4-20 x4
Hex bolts
(2x)
Aiming the fixture
#10-32
End screw
1.
Slide fixture assembly onto pendant and secure with both
1/4-20 x4 hex bolts.
Attach appropriate wires and ensure all connections are
2.
properly matched
Secure cover plate
3.
ADY071471 REV A(ECN070347)
Yoke arm
1. To aim fixtures, loosen both #10-32 end screws on one
fixture. When both indicators are lined up, the slope of the
lens face is 40-degrees. Each subsequent notch is an
additional +/- 10-degrees.
2. When fixture head is rotated to the desired angle, retighten
end screws to secure the position.
3. Repeat for second fixture head.
Fixture head
indicatorindicator
Page 2
Vault w/ visor
These installation instructions are valid with the above Ametrix styles
C-Scroll w/ visor
Mounting plate dimensions In[mm]
25.40
R1"
114.30
1
"
4
2
6"
Roundel w/ visor
Installation Instructions
Sheet 2 of 3
Large, INDOOR
P2R
(Pendant, 2-way, Remote ballast)
Visor and Non-Visor
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
: Before starting any work ensure
19.05
3
"
4
19.05
3
"
4
Top View
Do not
12.70
1
"
2
114.30
152.40
6"
Length dependant
on order
1
"4
2
Side View
ADY071471 REV A(ECN070347)
Page 3
Vault w/ visor
Lamp
C-Scroll w/ visor
These installation instructions are valid with the above Ametrix styles
Lamping Size Chart
(lamps provided by others)
Roundel w/ visor
Installation Instructions
Sheet 3 of 3
Large, INDOOR
P2R
(Pendant, 2-way, Remote ballast)
Visor and Non-Visor
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
: Before starting any work ensure
Do not
FIXTURE SIZE
(inches/ mm) WATTAGE
16
/ 419.1 32 W 1 T4 Compact Flourescent
1/2
16
/ 419.1 42 W 1 T4 Compact Flourescent
1/2
16
/ 419.1 57 W 1 T4 Compact Flourescent
1/2
16
/ 419.1 100 W 1 ED17 Ceramic Metal Halide
1/2
16
/ 419.1 150 W 1 T6 Ceramic Metal Halide
1/2
16
/ 419.1 175 W 1 ED17 Ceramic Metal Halide
1/2
22
/571.5 mm 250 W 1 ET18 Metal Halide
1/2
22
/571.5 mm 400 W 1 ET18 Metal Halide
1/2
22
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
1/2
22
/571.5 mm 32 W 2 T4 Compact Flourescent
1/2
22
/571.5 mm 42 W 2 T4 Compact Flourescent
1/2
22
/571.5 mm 250 W 1 ET18 Metal Halide
1/2
22
/571.5 mm 400 W 1 ET18 Metal Halide
1/2
22
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
1/2
22
/571.5 mm 350 W 1 T3 Halogen(Double Ended)
1/2
22
/571.5 mm 500 W 1 T3 Halogen(Double Ended)
1/2
# OF
LAMPS LAMP TYPE LAMP DESCRIPTION
(not to s cale)
30
/ 774.7 36 W 1 T5 Twin Tube
1/2
30
/ 774.7 40 W 1 T5 Twin Tube
1/2
30
/ 774.7 50 W 1 T5 Twin Tube
1/2
30
/ 774.7 55 W 1 T5 Twin Tube
1/2
30
/ 774.7 36 W 2 T5 Twin Tube
1/2
30
/ 774.7 40 W 2 T5 Twin Tube
1/2
30
/ 774.7 50 W 2 T5 Twin Tube
1/2
30
/ 774.7 55 W 2 T5 Twin Tube
1/2
30
/ 774.7 250 W 2 ET18 Metal Halide
1/2
30
/ 774.7 400 W 2 ET18 Metal Halide
1/2
30
/ 774.7 900 W 1 T3 Halogen(Double Ended)
1/2
30
/ 774.7 1000 W 1 T3 Halogen(Double Ended)
1/2
ADY071471 REV A(ECN070347)
Loading...