Cooper Lighting AMETRIX ADY071480, AMETRIX Vault, AMETRIX C-Scroll, AMETRIX Roundel Installation Instructions Manual
Page 1
Vault
These installation instructions are valid with the above Ametrix styles.
C-Scroll
Roundel
Installation Instructions
Sheet 1 of 3
Large, INDOOR
CR
(Cantilever, Remote ballast)
Visor and Non-Visor
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
: Before starting any work ensure
Do not
Exploded view and part call-out
#8-32 x3/8"
Set screw
Canopy
1/4-20 x3/4"
Hex bolts
(2x)
Fixture head
(2x)
Yoke assembly
Yoke end cap
#10-32 x1
End screw
(2x)
Attention:
All large fixtures require additional bracing/structure
around J-box to support fixture.
2
1/4-20 x3/4"
Hex bolts
(2x)
Securing fixture to cantilever
#6-32 x1/4
Flat head screw
Yoke arm
end cap
1
Use additional bracing around
J-box to support J-box.
#8-32 x3/8"
Set screw
Canopy
1. Prior to attaching fixture head to cantilever, remove both
#8-32 x3/8" set screws and allow canopy to slide down
pendant.
2. Feed power wire through wiring holes and using appropriate
fasteners, secure mounting plate to structure. Use additional
bracing around J-box to support J-box.
3
#8-32 x 3/8"
Set screws
(2x)
Mounting cantilever to structure
J-box
(by others)
Mounting plate
1/4" fastener
(by others)
(4x)
Wiring the fixture
Canopy
Wiring holes
Fixture head
1. To remove fixture head from yoke assembly, remove #10-32
x1 end screw from one side.
2. Remove the #6-32 x 1/4" Flat head screw from the inside of the
yoke arm and remove the yoke end cap.
3. With fixture head removed, secure yoke to cantilever using
1/4-20 x 3/4" hex bolts.
4. Run wiring from fixture head, into pendant and out holes in
mounting plate.
ADY071480 REVA(ECN080352)
#10-32 x1
End screw
1. After pulling wires through wiring holes in mounting plate,
attach appropriate wires and ensure all connections are
properly matched.
2. Push connections into J-box and secure canopy using both
#8-32 x3/8" set screws.
3. Refer to supplementary sheet for instructions on aiming and
sealing the fixture.
Page 2
Vault w/ visor
These installation instructions are valid with the above Ametrix styles
Top View
C-Scroll w/ visor
5"
127
3
88.90
Roundel w/ visor
Mounting plate dimensions In[mm]
1
1
"
2
38.10
1
"
2
Installation Instructions
Sheet 2 of 3
Large, INDOOR
CR
(Cantilever, Remote ballast)
Visor and Non-Visor
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
19.05
: Before starting any work ensure
3
"
4
3
"
4
19.05
Do not
Side View
1
3
"
2
5"
88.90
127
Length dependant
on order
9
32
7.11
1
"
2
12.70
"
ADY071480 REVA(ECN080352)
Page 3
Vault w/ visor
Lamp
C-Scroll w/ visor
These installation instructions are valid with the above Ametrix styles
Lamping Size Chart
(lamps provided by others)
FIXTURE SIZE
(inches/ mm) WATTAGE
16
/ 419.1 32 W 1 T4 Compact Flourescent
1/2
16
/ 419.1 42 W 1 T4 Compact Flourescent
1/2
16
/ 419.1 57 W 1 T4 Compact Flourescent
1/2
16
/ 419.1 100 W 1 ED17 Ceramic Metal Halide
1/2
16
/ 419.1 150 W 1 T6 Ceramic Metal Halide
1/2
16
/ 419.1 175 W 1 ED17 Ceramic Metal Halide
1/2
22
1/2
/571.5 mm 250 W 1 ET18 Metal Halide
22
/571.5 mm 400 W 1 ET18 Metal Halide
1/2
22
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
1/2
# OF
LAMPS LAMP TYPE LAMP DESCRIPTION
Roundel w/ visor
Installation Instructions
Sheet 3 of 3
Large, INDOOR
CR
(Cantilever, Remote ballast)
Visor and Non-Visor
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
(not to s cale)
: Before starting any work ensure
Do not
22
/571.5 mm 32 W 2 T4 Compact Flourescent
1/2
22
/571.5 mm 42 W 2 T4 Compact Flourescent
1/2
22
/571.5 mm 250 W 1 ET18 Metal Halide
1/2
22
/571.5 mm 400 W 1 ET18 Metal Halide
1/2
22
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
1/2
22
/571.5 mm 350 W 1 T3 Halogen(Double Ended)
1/2
22
/571.5 mm 500 W 1 T3 Halogen(Double Ended)
1/2
30
/ 774.7 36 W 1 T5 Twin Tube
1/2
30
/ 774.7 40 W 1 T5 Twin Tube
1/2
30
/ 774.7 50 W 1 T5 Twin Tube
1/2
30
/ 774.7 55 W 1 T5 Twin Tube
1/2
30
/ 774.7 36 W 2 T5 Twin Tube
1/2
30
/ 774.7 40 W 2 T5 Twin Tube
1/2
30
/ 774.7 50 W 2 T5 Twin Tube
1/2
30
/ 774.7 55 W 2 T5 Twin Tube
1/2
30
/ 774.7 250 W 2 ET18 Metal Halide
1/2
30
/ 774.7 400 W 2 ET18 Metal Halide
1/2
30
/ 774.7 900 W 1 T3 Halogen(Double Ended)
1/2
30
/ 774.7 1000 W 1 T3 Halogen(Double Ended)
1/2
ADY071480 REVA(ECN080352)
Loading...