Cooper Lighting ADY071468 User Manual

Vault

These installation instructions are valid with the above Ametrix styles.

C-Scroll

Roundel

Installation Instructions

Sheet 1 of 2

Small, OUTDOOR

P2R

(P

endant

, 2

-way

, R

emote ballast

Visor and Non-Visor

Warning

that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.

: Before starting any work ensure

Do not

)

Exploded view and part call-out

#10-32 x3/8"
Set screws
(2x)

1/4-20 x2 3/4"

Canopy (2x)

#8-32 x3/8"
Pan head screws
(8x)

Dual fixture assemblies require additional bracing/structure

2

around J-box to support fixture.

Wiring the fixture

Attention:

Hex bolt

1

Use additional bracing
around J-box to support
fixture

1/4" fasteners
(by others)
(4X)

1. Remove both 1/4-20 x 2 3/4" hex bolts from bottom of
pendant.

2. Remove both #10-32 x 3/8" set screws and allow canopy to
slide down pendant.

3. Run wires from J-box into pendant, ensure there is enough
wire to reach cover plate on bottom of fixture assembly.

4. Using appropriate fasteners, secure fixture to ceiling.

additional bracing around J-box to support fixture.

5. Replace canopy and secure using both set screws.

3

Securing Fixture to Ceiling

J-box
(by others)

#10-32 x3/8"
Set Screw
(2X)

Canopy

1/4-20 x 2 3/4"
Hex bolt
(2X)

Use

Sealing the fixture

1/4-20 x2 3/4"
Hex bolts
(x2)

Cover plate

#8-32 x3/8"
Pan head screws
(x8)

1.

Slide fixture assembly onto pendant and secure with both 1/4-

20 x.2 3/4" hex bolts.

2.

Remove cover plate on bottom of fixture assembly.

3.

Attach appropriate wires and ensure all connections are

properly matched.

4.

Secure cover plate with eight #8-32 x3/8" pan head screws.

#6-32 x1/2"
Socket cap screw
(2x)

#6-32 x5/8"
Socket cap screw

1.

To seal fixture, ensure door is secured with provided socket
cap screws. Secure #6-32 x1/2" socket cap screws above door
latches.

2.

Secure #6-32 x5/8" socket cap screw into center of door.

3.

Refer to supplementary sheets for torque specs and aiming
instructions.

ADY071468 REV B(ECN80481)

Vault w/ visor

LAMP

1

"

2

12.70

C-Scroll w/ visor

These installation instructions are valid with the above Ametrix styles

Roundel w/ visor

Mounting Plate Dimensions In [mm]

1

3

"

2

Length dependant

on order

88.90

5"

127

1

1

2

38.10

Installation Instructions

Sheet 2 of 2

Small, OUTDOOR

P2R

(P

endant, 2-way, Remote ballast

Visor and Non-Visor

Warning

that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.

"

: Before starting any work ensure

Do not

3
4

19.05

3
4

19.05

9

"

32

7.11
(x4)

)

"

"

Side view Top view

Lamping Size Chart

(lamps provided by others)

FIXTURE SIZE

(inches/ mm)

10

/ 273.05 39 W 1 T6 Ceramic Metal Halide

3/4

12

/ 323.85 70 W 1 T6 Ceramic Metal Halide

3/4

12

/ 323.85 150 W 1 T6 Ceramic Metal Halide

3/4

12

/ 323.85 26 W 1

3/4

12

/ 323.85 32 W 1

3/4

12

/ 323.85 42 W 1

3/4

10

/ 273.05 100 W 1 T4 Halogen (Single Ended)

3/4

12

/ 323.85 150 W 1 T4 Halogen (Single Ended)

3/4

12

/ 323.85 250 W 1 T4 Halogen (Single Ended)

3/4

WATTAGE

# OF

LAMPS

LAMP TYPE LAMP DESCRIPTION

4-Pin Triple

Tube

4-Pin Triple

Tube

4-Pin Triple

Tube

Compact Fluorescent

Compact Fluorescent

Compact Fluorescent

1

3

2

88.90

"

5"

127

(not to scale)

Use only GE or Sylvania

SFL lamps

ADY071468 REV B(ECN80481)