Cooper Lighting ADY071442 User Manual
Vault
These installation instructions are valid with the above Ametrix styles.
C-Scroll
Roundel
Installation Instructions
Sheet 1 of 2
Small, INDOOR
YR
(Y
oke mount
, R
emote ballast
)
Visor and Non-Visor
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
: Before starting any work ensure
Do not
Exploded view and part call-out
#10-32
Vertical
set screw
J-box
(by others)
Mounting
plate
#8-32 Mounting
screws
(by others)
Fixture head and yoke
2
Attaching fixture head and yoke to
1
1.
Loosen vertical set
screw and remove
mounting plate
3
Fixing mounting plate to J-box
Mounting plate
2.
Using #8-32 mounting screws (by others)
secure mounting plate to J-box.
Aiming the fixture
mounting plate
#10-32 Vertical
set screw
Hook yoke and fixture
head on lower flange
of mounting plate.
1.
Attach wires ensuring all connections are properly matched.
2.
Angle yoke behind bottom flange on mounting plate and
press together.
3.
Secure fixture using vertical set screw.
ADY071442 Rev B (ECN80481)
#10-32 End
screw
Fixture head
indicator
Yoke arm Indicator
1.
To aim the fixture, loosen both #10-32 end screws. When
the PointGrabTM system indicators are lined up, the slope
of the lens face is 40-degrees. Each subsequent notch is
an additional 10-degrees.
2.
When the fixture head is adjusted to the desired angle,
re-tighten end screws to secure the position.
40
Vault w/ visor
LAMP
1
4 "
2
114.60
C-Scroll w/ visor
Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Mounting Plate Dimensions (In and mm)
Mounting plate is compatible with 10 3/4"(273.05mm) and 12 3/4"(323.85mm) small remote yokes.
1
1
"
2
37.15
3
58"
137.16
1
"
3
2
88.90
Slots fit standard 4.5"
J-box
(x4)
Installation Instructions
Sheet 2 of 2
Small, INDOOR
YR
(Y
oke mount
, R
emote ballast
)
Visor and Non-Visor
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
: Before starting any work ensure
Do not
This side to J-Box
3
3 "
8
87.23
1
"
2
4
55.79
FIXTURE SIZE
(inches/ mm)
10
3/4
12
3/4
12
3/4
1
"
(x2)
4
6.35
Holes for additional
support into studs.
2
[50.8 mm]
Clearance hole
1
"
2
11.43
Lamping Size Chart
(lamps provided by others)
WATTAGE
/ 273.05 39 W 1 T6 Ceramic Metal Halide
/ 323.85 70 W 1 T6 Ceramic Metal Halide
/ 323.85 150 W 1 T6 Ceramic Metal Halide
# OF
LAMPS
LAMP TYPE LAMP DESCRIPTION
1
" Aluminum Plate
8
2.03
Flange receives bottom
of canopy
(not to scale)
12
/ 323.85 26 W 1
3/4
12
/ 323.85 32 W 1
3/4
12
/ 323.85 42 W 1
3/4
10
3/4
/ 273.05 100 W 1 T4 Halogen (Single Ended)
12
/ 323.85 150 W 1 T4 Halogen (Single Ended)
3/4
12
3/4
/ 323.85 250 W 1 T4 Halogen (Single Ended)
ADY071442 Rev B (ECN80481)
4-Pin Triple
Tube
4-Pin Triple
Tube
4-Pin Triple
Tube
Compact Fluorescent
Compact Fluorescent
Compact Fluorescent
Use only GE or Sylvania
CFL Lamps
Loading...