Cooper Lighting 695-WP-DB, 697-WP User Manual

SHAPER

™

EXTERIOR WALL

695-WP-DB
SERIES

695-WP Half Pyramid with Direct
Illumination and a Back Panel.

697-WP SERIES

The 697-WP features a compact cast
Aluminum Hood Downlight.

10"

20"

18"

Sample Number: 695-WP-DB-MH/1/70-277V-GM

Series

695-WP-DB =
Half Pyramid w/
Back Panel

Lamp

CFL/1 (26/32/42W-Triple)
INC/1/60
MH/1/50
MH/1/70

1'-8"

9"

Voltage

120V

1

277V

2

347V

3, 4

Finish

NBZ (standard),
BK, BM, CC, DP,
GM, GRM, GY,
SCL, SM, WH

Options

C
PH

5

QR

MH/1/100

Notes:
1 CFL and MH only.
2 Available with CFL only.
3 Premium TGIC polyester powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear.
4 Bronze will weather to a dark bronze patina.
5 MH only.

R4"

4-3/8"

12-7/8"

6-3/8"

INC & CFL MH

6"

4-3/8"

9"

6-3/8"

Sample Number: 697-WP-INC/1/100-120V-GM

Series

697-WP =
Hood Downlight

Lamp

CFL/1 (26/32/42W-Triple)
INC/1/100
MH/1/50
MH/1/70

Notes:
1 CFL and MH only.
2 Available with CFL only.
3 Premium TGIC polyester powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear.
4 MH only.

MH/1/100

Voltage

120V

1

277V

2

347V

R4"

9"

14-1/2"

Finish

BK, WH (standard),
BM, CC, DP, GM,
GRM, GY, SM

6"

INC, CFL & MH

3

Options

C

4

QR
TGL
PH

MATERIAL

Solid bronze construction
with a clear textured
refractive glass lense
for MH or white acrylic
lense for incandescent
and CFL lamps.

BALLAST

Integral electronic HPF,
multi-volt 120/277V (347V
Canada), thermally
protected with end-of-life
circuitry to accommodate
specified lamp wattage.
Integral metal halide
ballast is electronic HPF,
multi-volt 120/277V for the
specified lamp wattage.
347V ballast for metal
halide - Contact factory.

INSTALLATION

Supplied with a universal
mounting back for a
standard 4" J-box or
plaster ring. Optional rear
(through wall) feed
conduit mounting.

LAMP/SOCKET

One (1) 26W, 32W
(GX24q-3) or 42W
(GX24q-4) 4-pin triple
tube CFL lamp or one (1)
60W A-19 lamp. CFL
socket injection molded
plastic. INC socket fired
ceramic rated for 660W­250V. Metal halide
is ceramic pulse-rated,
4KV. Lamps furnished by
others.

FINISH AND OPTIONS

See page 1020 for finish
details and options.

MATERIAL

Cast aluminum
construction with clear
tempered refractive glass
for MH incandescent or
1/8" white acrylic for
incandescent and CFL
lamps. Optional clear

8"

tempered glass for full
cut-off.

BALLAST

Integral electronic HPF,
multi-volt 120/277V (347V
Canada), thermally
protected with end-of-life
circuitry to accommodate
the specified lamp
wattage. Metal halide
ballasts are electronic
HPF, multi-volt 120/277V

4

for the specified lamp
wattage. 347V ballasts for
metal halide - Contact
factory.

INSTALLATION

Supplied with a mounting
back for a standard 4"
J-box or stucco ring.
Optional rear (through
wall) feed conduit
mounting.

LAMP/SOCKET

One (1) 26W, 32W
(GX24q-3) or 42W
(GX24q-4) 4-pin triple
tube CFL lamp or one (1)
50W, 70W or 100W ED-17
metal halide lamp or
one (1) 100W A-19 lamp.
CFL socket injection
molded plastic. INC
socket fired ceramic
rated for 660W-250V.
Metal halide socket
ceramic pulse-rated,
4KV. Lamps furnished
by others.

FINISH AND OPTIONS

See page 1020 for finish
details and options.

COOPER LIGHTING

998