Page 1
687 SERIES
687/4 SERIES
Interior Wall Luminaire
Classic Geometric Wedge
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
687 features classic Geometric Wedge shape with indirect
illumination. The 687-4 features similar geometry and is ADA
compliant.
SPECIFICATION FEATURES
Material
Painted or plated cold-rolled
steel base metal. Optional
aluminum cube cell louver,
white.
Finish
Standard: Matte White (MW) or
Matte Black (MB). Premium:
Satin Chrome (SC), Polished
Chrome (PC), Satin Brass (SB),
Polished Brass (PB), Satin
Aluminum (SAL), Oxidized
Bronze (OBZ), Satin Copper
(SCP), Polished Copper (PCP),
Satin Nickel (SN), Polished Nickel
(PN), Oxidized Brass (OBRS),
Lacquered Satin Chrome (SCL),
Lacquered Satin Nickel (SNL) or
Custom Color (CC).
Optics
Refer to
www.shaperlighting.com for
complete photometrics.
Ballast
Integral Electronic HPF multi-volt
120/277V (347V Canada),
thermally protected with end-oflife circuitry to accommodate the
specified lamp wattage. Metal
Halide Ballast are HPF core and
coil type, multi-volt 120/277V for
the specified wattage. Contact
factory for 347V.
Lamp/Socket
687 - 9": One (1) 26W or 32W
(GX24q-3) 4-pin triple CFL lamp
or one (1) 75W A-19 lamp.
687/4 - 9": One (1) 13W (2GX7)
4-pin low wattage CFL lamp, one
(1) 26W (G24q-3) 4-pin quad CFL
lamp or one (1) 75W A-19 lamp.
687 - 12": Two (2) 26W or 32W
(GX24q-3) 4-pin triple CFL lamps,
two (2) 75W A-19 lamps, one (1)
300W double-ended T-3 halogen
lamp or one (1) 50W, 70W or
100W ED-17 metal halide (open
burn) lamp.
687/4 - 12": Two (2) 26W (G24q-3)
quad CFL lamps or two (2) 75W
A-19 lamps. CFL socket injection
molded plastic. INC socket fired
ceramic rated for 660W-250V.
Lamps furnished by others.
Installation
Supplied with a universal
circular strap for a standard 4"
J-box or plaster ring.
Options
Quartz Restrike-12" 687 MH only
(QS), 1/2" Cube Cell Louver (CL),
Tempered Glass Lense (MH only)
(TGL), Punch Pattern - White
(WPP), Blue (BPP), Green (GPP)
Red (RPP) or Yellow (YPP),
Perforated Panel (PI), Modified
Emergency Battery (MEM) - 12"
only, Remote Emergency Battery
(REM), Damp Location (DL): All
Painted Finishes, Lacquered
Satin Chrome (SCL) and
Lacquered Satin Nickel (SNL)
finishes only. Energy Star Rating
- Contact factory.
Labels
U.L. and C.U.L approved for
indoor and damp location. See
options for damp location
finishing requirements. 687/4-9
and 687/4-12 are ADA compliant.
Modifications
Shaper's skilled craftspeople
with their depth of experience
offer the designer the flexibility
to modify standard wall
luminaires for project specific
solutions. Contact the factory
regarding scale options, unique
finishes, mounting, additional
materials/colors, or decorative
detailing.
DESCRIPTION
ADS042691
2008-09-17 13:59:24
ORDERING INFORMATION
Catalog #
Project
shaperlighting.com
Type
Sample Number: 687-12-MH/1/70-277V-PCP
Comments
Prepared by
Date
AMERICAN DISABILITIES
ACT (ADA)
Shaper offers a large selection of ADA
interior and exterior wall luminaires.
ADA requires all fixtures below 68" to
have a maximum projection of 4".
Series
Geometric
=
687
Wedge
Geometric
=
687/4
Wedge
Notes:
1
Available in 9".
2
Available with 687/4 Series.
3
Available with 687 Series.
4
Available in 12".
5
CFL and MH only.
6
Available with CFL only.
7
MH only.
Size
9"
12"
Lamp
1, 2
CFL/1/13
1, 3, 2
CFL/1/26
1, 3
CFL/1/32
CFL/2
(26/32W-Triple)
CFL/2/26
1, 3, 2
INC/1/75
4, 3, 2
INC/2/75
HAL/1/300
4, 3
MH/1/50
4, 3
MH/1/70
MH/1/100
Voltage
120V
277V
347V
4, 3
4, 2
4, 3
4, 3
Finish
Natural Aluminum=
NA
5
Standard
6
Matte Black=
MB
MW
Premium
Custom Color=
CC
OBRS
OBZ
Polished Brass=
PB
Polished Chrome=
PC
PCP
Polished Nickel=
PN
SAL
Satin Brass=
SB
Satin Chrome=
SC
SCL
SCP
Satin Nickel=
SN
SNL
Matte White=
Oxidized Brass=
Hand Oxidized Bronze=
Polished Copper=
Lacquered Satin Aluminum=
Lacquered Satin Chrome=
Satin Copper=
Lacquered Satin Nickel=
Options
Blue Punch Pattern=
BPP
Green Punch Pattern=
GPP
Red Punch Pattern=
RPP
White Punch Pattern=
WPP
Yellow Punch Pattern=
YPP
Cube Cell Top Louver=
CL
Damp Location=
DL
Modified Integral
=
MEM
Emergency Battery
Perforated Insert=
PI
Quartz Restrike
=
QR
Remote
=
REM
Emergency
Battery
Sandblasted
=
TGL
Tempered
Glass Lens
SUSTAINABLE
DESIGN
Shaper has a long-standing history
of offering environmentally-friendly
fixtures. The copper and bronze alloys
used in our exterior luminaires feature
up to 98% recycled content, contribute
less undesirable air emissions compared
to painted aluminum and are easy to
recycle.
MAGNETIC
RESONANCE
4, 3
4, 3
7
Refer to the Icon Legend
Link on shaperlighting.com.
IMAGING (MRI)
Lighting fixtures for MRI facilities are
specialized and unique, requiring nonferrous construction. Fluorescent fixtures
cannot be used due to the ferrous parts in
ballasts and lampholders. Modified incandescent fixtures meet the requirements.
ENERGY
STAR
Shaper now offers a wide variety
of fixtures that can be provided
with an Energy Star Rating.
Page 2
Specifications and dimensions subject to change without notice.
Shaper Lighting • 1141 Marina Way South • Richmond, CA 94804 • ph 510.234.2370 • fax 510.234.2371
DIMENSIONS
687 - 687/4 SERIES INTERIOR WALL LUMINAIRE
ADS042691
2008-09-17 13:59:24
9"
1"
9"
12"
1"
11 "
8"
9"
687-9" STANDARD
9"
8"
4"
687/4-9" STANDARD
8"
3/8"
10"
11 "
687-12" STANDARD
4"
10"
4"
12"
10"
4"
3/8"
1/2" CUBE CELL LOUVER (CL)
PERFORATED PANEL (PI)
687/4-12" STANDARD
OPTIONS
TEMPERED GLASS LENS (TGL)
PUNCH PATTERN -
WHITE (WPP), BLUE (BPP),
GREEN (GPP), RED (RPP)
Loading...