Cooper Lighting 601-H User Manual

INSTALLATION INSTRUCTIONS

LAMP HOUSING

ACRYLIC LENS

NOTICE:
For proper installation, have a qualified electrican install



this product.
Before installation of any fixture onto an electrical junction



box, be sure to disconnect power.
This fixture must be wired and grounded in accordance with



the National Electrical Code, local codes, and ordinances.
Wire supply connections must be made with U.L. approved



connectors.
Check that fixture voltage and building voltage are the same.



601-H

SUPPORT
CHANNELS

LEFT & RIGHT
TRIM PLATE

GLASS
SUPPORT
GROOVES

A

AUXILIARY
MOUNTING
SCREW HOLES

BOTTOM
TRIM PLATE

RETAINING
TRIM SCREWS
(LEFT OR RIGHT)

INSTRUCTIONS:

1. Remove retaining

2. Attach to wall using support channels with holes provided
contractor may add additional holes as required.

3. Connect the fixture neutral (white) to the supply neutral.

Connect the fixture line wire (black) to the supply line.
Use U.L. approved wire connectors.

Fasten green ground wire to ground screw.

4. Remove (squeeze) acrylic lens and install lamp to test fixture before continuing,

remembering to turn power on for testing only, then turn power off.

5. Reinstall lens by snapping into groove on eaither side of lens.

6. Install mirror (by others) into glass support grooves of the left & right trim plate,

and re-securing

trim screws

retaining trim screws to lock in the mirror.

1141 MARINA WAY SOUTH, RICHMOND, CA 94804-3742
[phone] FAX: [phone]

on eighter left or right trim plate.

to J-box (by others),

PN# 11509707
REV. A
8/13/2007