Cooper Lighting 55W, 36W User Manual
Remote Ballast Mounting Instructions
Balla st
Balla st
Ballast Dimensions for Remote
Mounting of Compact Fluorescent
Ballasts
Remote ballast mounting is not outdoor rated. All remote ballasts must be
mounted indoor, unless special ordered.
(Mounting screws and wire connection box not included)
Supplementary Installation Instructions
Warning
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
: Before starting any work ensure
Sheet 1 of 1
Do not
3
1
16
29.97
"
Description
Twin tube 1
Twin tube 1
11
16
"
16
424.18
3
1
11
16 "
32
16
29.97
"
415.04
Attention:
Maximum remote distance for an electronic ballast depends upon the ballast manufacturer
and may require use of special low capacitance wire, separate conduit runs for lead wires, or
other special installation requirements. See ballast manufacturer's installation instructions or
contact the factory for remote mounting distance and installation requirements.
Lamp
# of
Lamps
Wa ttage Voltage
36W
36W
UNV 20ft. Twin tube 2
347V 20ft. Twin tube 2
Remote
Distance
Lamp
Description
# of
Lamps
Wattage Voltage
36W
36W
Side ViewTop View
Remote
Distance
UNV 20ft.
347V 20ft.
1"
25.40
1
29.97
16
3
"
Twin tube 1
Twin tube 1
Twin tube 1
Twin tube 1
ADY071486 REV A(ECN080361)
50W
50W
55W
55W
UNV 20ft. Twin tube 2
347V 20ft. Twin tube 2
UNV 20ft. Twin tube 2
347V 20ft. Twin tube 2
50W
50W
55W
55W
UNV 20ft.
347V 20ft.
UNV 20ft.
347V 20ft.
Loading...