Cooper Lighting 850DCS FD, 850DCS DD, 500DCS User Manual
DESCRIPTION
Thermal
Protector
Separate Wiring
Compartment
18” flexible conduit
5.69”
22.76”
23.59”
24.26”
25.56”
7.95”
10.31”
7.19”
5.69”
9.25”
16.44”
7.45”
Required
above
ceiling
Integral Electronic
Metal Halide Ballasts
45º x 45º
Adjust
Double
Gimbal
1.70”
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes FOUR (4) PAR30 Metal Halide
lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder coated
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
the inner hardware of the fixture from sight
below the ceiling. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.
E ... Lamps
Four (4) PAR30 Metal Halide lamps
mounted in adjustable double gimbal.
Lamp holders are removable and may be
regressed 1” for additional cut-off. Lamps
can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x
45º locking lamp adjustment. Beveled-
Catalog # Type
Project
Comments Date
Prepared by
edge lamp ring is secured with threadless, bayonet action. Optional retractable
arm is available for lamp pulldown and
extreme aiming. Includes Med. Base
sockets.
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 6.94” x 23.85”
COMBOLIGHT®
Multi-Lamp Fixture
PAR30 Metal Halide
w/ 0.75” Trim Flange
Next Generation
Recessed
Four (4) Light
Remodel Housing
For use with 39W or 70W PAR30 Metal Halide lamps.
ORDERING INFORMATION
C4 R E T
Configuration
C4 = COMBOLIGHT
Recessed Four (4) Light
www.cooperlighting.com
Lamp Type / Wattage Label
039M30 = 39 Watt PAR30 Metal Halide
070M30 = 70 Watt PAR30 Metal Halide
Housing
R = Remodel
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Power Supply
E = Electronic Metal Halide
Power Supply
Voltage
1 = 120V
2 = 277V
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75” Trim Flange
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 050108
Loading...