Cooper Instruments WSC 4329 Specifications

WSC 4329 WIRELESS CELLMITE

®

he WSC 4329 wireless signal conditioner directly connects to
standard strain gage load cells or pressure transducers. Wireless

T

signals can reach up to 1500 feet. The system consists of the
WSC 4329 which connects to the load cell and also offers a 0-10Vdc
output which may be connected to a digital display. The WSC 4329M
directly connects to a PC with RS232. Monitor and control networked
units with Graphical User Interface (GUI).

The WSC 4329 also features a nonvolatile memory for parameter and
calibration storage, the ability to select between three transducers, multi­point and mV/V calibration, remote sense excitation, and a 24-bit
internal resolution with 16-bit analog output. The WSC 4329 compen­sates for transducer nonlinearities using its integrated 6-point calibra­tion. Its wireless communication port and simple command set allows
for easy set up.

APPLICATION

• STORES CALIBRATION DATA FOR
3 SENSORS

• SETUP A TEST TO START AND STOP
AUTOMATICALLY

• USER PROGRAMMABLE ANALOG OUTPUT

• 60 SAMPLES PER SECOND

• 6 POINT LINEARIZATION CALIBRATION

WSC 4329

DIGITAL FORCE INDICATOR

SPECIFICATIONS

GENERAL

• CHANNELS 1

• TEMPERATURE: Internal Temperature compensation

• MATERIAL Plastic Case

• POWER: 110/240VAC,
Optional 4340 Rechargeable Battery
Pack
Compatible with 4 x AA NiMH

• PEAK HOLD: Tare and Reset Peak and Valley

• RELAY Solid State

TRANSDUCER

• EXCITATION: Voltage: 5 VDC. Nom. Load 350 Ω

• INPUTS ±5.5 mv/v

• CALIBRATION METHOD: 6 Pt Linearization, 2Pt, Shunt Cal

AMPLIFIER

• OUTPUTS: Analog: 16-bit Scalable, ±10V.
Serial Data: Multi-drop RS232

• STORAGE: For three calibrated load cells.

• UNITS: LB, Kg, In, Cm, %, User-Defined

• RESOLUTION: 24-bit internal resolution,
error 0.01%, ±1 count.

• WIRELESS: Nominal Frequency 900 MHz
Classification: Mobile
This device complies with Part 15
of the FCC Rules.

COOPER INSTRUMENTS & SYSTEMS

PHYSICAL

• DIMENSIONS: 5.5" x 2.75" x 1.2".

• WEIGHT: 8.9 oz (252g).

SOFTWARE

• CellViewLite (CellView Multi-Display for up to 4 Units).

• Guides user through adding/removing WSC Units.

• Stores calibration data for three sensors.

• Guides user through sensor calibrations.

• Tare and reset peak and valley for the sensor.

• Set output data with a quadratic filter.

• Save/Load the WSC unit and sensor setup information.

• Setup a test to start and/or stop automatically.

• LEDs indicate operational status of the GUI.

• Save data, calibration, and sensor test information to spreadsheets.

• Control ouput with relay switch.

• User programmable analog output voltage.

www.cooperinstruments.com [e-mail]

1-800-344-3921

4/10/07