Cooper Instruments TRX 1000-00 Specifications

Casters or Leveling Feet

Optional Components

• Digital Height Micrometer - Frame Mount

• WinWedge Serial Data Acquistion Software

• Ultra Precision Load Cell

• Electric Pump

• Custom Fixtures Available

• RS 232/Analog Outputs

Ask about System Retrofits to your existing
press. T-Rex frame designs available in 25 and
55 tons

T-Rex Test Stand – A Portable Hydraulic Test System

www.cooperinstruments.com

1-800-344-3921

[e-mail]

T

he T-Rex Test Stand has been designed to accommo-
date a variety of materials, component and product

tests. This rugged and flexible system provides the
capacity of 4 tons in tension and 10 tons in compression.
The numerous applications possible with the T-Rex Test
Stand include mechanical connection tests, adhesive bond
strength verification, extraction force tests, crushing strength
review and many other test applications. Material strengths
typically investigated include metals, rigid plastics, concrete,
adhesives, foils, paper, packaging, wood and others.

Measurements shown in inches [metric].

Standard System Components

DFI Infinity Digital Indicator/Controller

6 digit controller
4 alarm set points
Zero Tare
Channels: 1
Temperature (operating): 32˚ to 130˚F
HI/LO Limits (Dual): 4 standard
Amplifier Accuracy: .005% of Reading
Peak/Valley Hold: Standard

Hydraulic Hand Pump

All metal, heavy duty construction
P159D Double Acting Hand Pump
Maximum Pressure (psi): 325 LP,

10,000 HP

Oil Port (in.): 3/8 NPTF

Hydraulic Cylinder

Heavy duty load cap & safety relief valve
RD1010 Double Acting Cylinder
Capacity: 10 Ton Push, 4 Ton Pull

LTR 820 Load Cell

Load Ranges: 0 – 20,000 lb.
Accuracy: 0.25% F.S.
Material: Stainless Steel
Shown with Compression Button (included)

Force Limiting Valve

Allows users to set a load limit in either
tension or compression

Bolster Plate

3/4-16 Thread center Hole

T-Rex is shipped
completely assembled
and ready to use.