Cooper Instruments PSG110-150 Specifications
PSG 110 - MINIATURE PRESSURE TRANSDUCER
his subminiature pressure transducer is designed to accurately
measure pressure ranges from 15 psi to 20,000 psi.
T
Manufactured with a stainless steel diaphragm, the one piece
design allows for a thin diaphragm but heavy sidewalls. This enables the
transducer to be used in rugged environments while still being able to
measure in low ranges. These transducers have a small electrical zero
balance circuit board which is in the lead wire (approx. 1" x .087" thick).
SPECIFICATIONS
PRESSURE RANGES:
LINEARITY/HYSTERESIS:
REPEATABILITY:
MATERIAL:
TEMPERATURE RANGE:
OUTPUT:
BRIDGE RESISTANCE:
EXCITATION:
SAFE OVERLOAD:
CABLE:
150 psi to 15,000 psi
150 psi to 15,000 psi - 1.0% F.S.
150 psi to 15,000 psi - ±0.1% F.S.
17-4 PH Stainless
60˚ to 160˚F
150 psi to 20,000 psi - 2 mv/v
350 ohm
5 Vdc
50% Over Capacity
4 Twisted Leads - 5 Ft
• HIGH FREQUENCY
• FLUSH DIAPHRAGM
• SMALL SIZE AND RUGGED
• 150 TO 20,000 PSI
PRESSURE TRANSDUCER
AVAILABLE RANGES T A" D"
Thread Dia Dia B" G" Dia
PSG 110 150; 200; 300 psi 3/8-24UNF .310 .50 .45 .69 Welded
500; 750; 1000; 1500; 2000; 3000 psi 3/8-24UNF .310 .50 .45 .69 Welded
5000; 7500; 10,000; 15,000 psi 3/8-24UNF .310 .50 .45 .69 Welded
PSG 111 150 - 15,000 psi 7/16-24NF .375 .56 .50 .75 Welded
*Stocked ranges are in bold type. The 3/8-24 Threaded Transducer is stocked only. 7/16-20UNF available on all models
COOPER INSTRUMENTS & SYSTEMS
www.cooperinstruments.com sales@cooperinstruments.com
1-800-344-3921
9/21/09
Loading...