Cooper Instruments LPM510-10 Specifications
LPM 510 - SUBMINIATURE LOAD CELLS
odel LPM 510 (compression only) subminiature load cell
is designed to measure load ranges from 150 grams to 1000
M
subminiature dimensions, including diameters from 0.38" to 0.75" and
Heights of 0.13" to 0.25" allow these units to be easily incorporated into
systems having limited space. A small (1.0" long x 0.08" thick circuit
board on ranges 50 g - 1000 g) is included in each load cell’s lead wire
cable for temperature compensation.
pounds with a high frequency response rate. The
SPECIFICATIONS
LOAD RANGES:
LINEARITY/HYSTERESIS:
REPEATABILITY:
MATERIAL:
TEMPERATURE RANGE:
OUTPUT:
BRIDGE RESISTANCE:
EXCITATION:
SAFE OVERLOAD:
CABLE:
150 g to 1000 lb
±0.5% F.S.
±0.1% F.S.
Stainless Steel
60˚ to 160˚ F
150 g to 500 g - 15mv/v
1000 g - 1.5mv/v
5 to 1000 lb - 2mv/v
150 g to 500 g - 500 ohm
1000 g - 350 ohm
5 to 1000 lb - 700 ohm
5 Vdc
50% Over Capacity
5 ft Silicon
• TENSION/COMPRESSION
• WAFER-THIN
• UP TO 1000 LB
• HIGH/LOW TEMP. OPTION
• 150 GMS TO 1000 LB
• OPTIONAL BOTTOM CABLE EXIT
COMPRESSION ONLY
LOAD CELLS
AVAILABLE RANGES D1" D2" H"
A) 150; 250; 500; 1000 g; 5 lb .38 .09 .13
B) 10; 25; 50 lb .38 .09 .18
C) 100; 250 lb .50 .12 .15
*D) 500; 1000 lb .75 .20 .25
A)
B)
COOPER INSTRUMENTS & SYSTEMS
C)
D)
*Ranges available in this envelop size are 10, 25, 50, 100 ,250.
www.cooperinstruments.com sales@cooperinstruments.com
1-800-344-3921
8/8/07
Loading...