Cooper Instruments LKCP475-50 User Manual

LKCP 475 - DONUT LOAD CELL

odel LKCP 475 is a donut shaped load cell, and is an
economical answer for applications requiring a through-hole

M

post or leg mount and rolling mill systems. These models are used in
compression applications. For optimum performance these models must
be mounted between load surfaces which are flat and parallel. The
extremely low profile and compact design, combined with their all stain­less steel construction and environmental protection have a proven reli­ability in tough industrial applications.

design. Such applications include bolt force measurement,

SPECIFICATIONS

LOAD RANGES:
ACCURACY:
LINEARITY:
REPEATABILITY:
MATERIAL:
TEMPERATURE RANGE:
OUTPUT:
BRIDGE RESISTANCE:
EXCITATION:
SAFE OVERLOAD:
CABLE:

5 lb to 10,000 lb

±0.5% F.S.
±0.5% F.S.
±0.1% F.S.

Stainless Steel
60˚ to 160˚ F
2 mV/V
350 ohm
10 Vdc
150% of Capacity
5 ft.

• COMPRESSION ONLY

• THRU-HOLE DESIGN

• STAINLESS STEEL

LOAD CELLS

DIMENSIONS O.D H

5 to 100 lb 2.00 0.37
250 to 10,000 lb 2.00 0.63

AVAILABLE INSIDE DIAMETERS
Capacity .125" .188" .250" .375" .500" .625" .750" .875" 1.00"

5 XXXXXX
10 XXXXXX
25 XXXXXX
50 XXXXXX
100 XXXXXX
250 XXXXXXXX
500 XXXXXXXXX
1000 XXXXXXXXX
2000 XXXXXXXX
3000 XXXXXX
5000 XXXXX
7500 X X
10,000 X X

COOPER INSTRUMENTS & SYSTEMS

www.cooperinstruments.com [e-mail]

1-800-344-3921

2/25/08