Cooper Instruments ESM Specifications
ESM MOTORIZED FORCE TEST STAND
he Mark-10 ESM is a motorized force testing stand designed to work with
any Mark-10 force gauge and grips. The stand advances the item being
T
tested against the force gauge by remote control, allowing the operator the
safety and convenience of conducting the test at a distance. The ESM allows for
accurate testing of compression and tensile strength up to 200 lbF. Because it is
modular in design, it will accommodate a wide variety of sample shapes and sizes.
The ESM utilizes a fully adjustable stepper motor that prevents speed variation
with load, making testing more precise and repeatable. It also includes a manual
motor speed fine adjustment control. The ESM is available with optional column
extensions of 6" , 12" and 24", a limit switch kit and overload protection module.
SPECIFICATIONS
LOAD CAPACITY: 200 lbF
MAXIMUM TRAVEL DISTANCE: Approximately 13 inches (330 mm)
SPEED RANGE: 0.5 - 13 inches/minute
(13 - 300 mm/minute)
SPEED SETTING ACCURACY: ±5%, ±0% variation with load
WEIGHT:
TEST STAND: 20.0 lbs
REMOTE CONTROL UNIT: 2.7 lbs
POWER: 80-240 VAC, 50/60 Hz
WARRANTY: Three years
• ALLOWS REMOTE CONTROLLED
FORCE TESTING FROM A DISTANCE
• LOAD CAPACITIES OF UP TO 200 LBF
• PRECISION SPEED CONTROL FOR
HIGHLY REPEATABLE RESULTS
• VERSATILE FOR TESTING A WIDE
VARIETY OF SAMPLES
• DESIGNED TO OPERATE WITH YOUR
FORCE GAUGES
• ADJUSTABLE TRAVEL SPEED
• OPTIONAL COLUMN EXTENSIONS
ADD MORE VERSATILITY
• OPTIONAL DIGITAL TRAVEL DISPLAY
AND OVERLOAD PROTECTION
MODULE AVAILABLE
ESM
SHOWN WITH OPTIONS
TEST STANDS
ORDERING INFORMATION
Model Description
ESM Motorized force measurement stand, 200 lbF, 110 VAC
ESM-E Motorized force measurement stand, 200 lbF, 220 VAC
ESM-001 Optional digital travel display
ESM-002 Optional limit switch kit
ESM-003-1 Optional 6" column extension
ESM-003-2 Optional 12" column extension
ESM-003-3 Optional 24" column extension
11-1042 Optional force gauge overload protection module
09-1090 Optional set point cable (stops travel at programmable high
and low set points for tension and compression tests)
Optional
Limit Switch
Kit
COOPER INSTRUMENTS & SYSTEMS
Optional
Digital Travel
display
BASE PLATE
www.cooperinstruments.com sales@cooperinstruments.com
1-800-344-3921
CONTROL UNIT
9/13/07
Loading...