Cooper Instruments DFI-INFINITY Specifications
TM
DFI INFINITY - DIGITAL INDICATOR/CONTROLLER
he DFI Infinity bench top or panel indicator, is a versatile sixdigit process controller with 1 microvolt resolution. The Infinity
T
can be calibrated to any 350 ohm strain gage transducer via the
front panel pushbutton or the optional serial communications board.
This portable unit allows the user to scale and offset their input signal
into any engineering units desired. Standard features include peak and
valley hold, zero tare and 4 alarm set points. Other options available are
duplex RS-232 or RS 485, analog output and BCD output.
BENCH TOP/PANEL METER SHOWN
• 6 DIGIT DISPLAY
• FIELD INSTALLED OPTIONS
• KEY PAD CALIBRATION
• IN STOCK-QUICK DELIVERY
DIGITAL FORCE INDICATOR
SPECIFICATIONS
GENERAL
• CHANNELS: 1
• TEMPERATURE (Operating): 32˚ to 130˚ F
• TEMPERATURE (Storage): -20˚ to 200˚ F
• MATERIAL: PolyCarbonate
• POWER REQUIRED: 115/220Vac
• PEAK/VALLEY HOLD: Standard
• RS232/RS485: Optional
• BCD: Optional
• HI/LO LIMITS (Dual): 4 Standard
• RELAYS: Optional, 2 or 4
TRANSDUCER
• EXCITATION: 1.5 To 11 or 24 Vdc
• INPUTS ACCEPTED: 0-5Vdc,0-10Vdc,
0-100mV,±50mV
±500mV,±5V,±50V
0-20mA,4-20mA
• CALIBRATION METHOD: Front Key Pad, Computer
• BRIDGE RESISTANCE: 350 ohm
COOPER INSTRUMENTS & SYSTEMS
AMPLIFIER
• ACCURACY: .005% of Reading
• ANALOG OUTPUT: 0-10Vdc,4-20mA
(Optional)
• RESPONSE TIME: 4 or 13 Per Second
DIGITAL DISPLAY
• DISPLAY: 6 Digits
• DISPLAY UPDATE: 3 Per Second
• MAXIMUM DISPLAY: 999999
• POLARITY INDICATIONS: Yes
• OVERRANGE: Yes
• DISPLAY SIZE: .54"High
• RESOLUTION: 1 Microvolt
• TYPE: LED
PHYSICAL
• WEIGHT: 1.27 lb
• DIMENSIONS: 1.772" H x 3.662"W
TM -Infinity is a trademark of Newport Electronics.
www.cooperinstruments.com sales@cooperinstruments.com
1-800-344-3921
3/28/07
Loading...