Cooper Instruments DFI-2000 Specifications
DFI 2000 - PROCESS MONITOR/CONTROLLER
he DFI 2000 is a process monitor and controller designed to
work with a variety of sensors including: Force, torque,
T
pressure or displacement. This unit is capable of capturing
and storing multiple peaks and high speed recording of measurement
profiles vs. time. Also optional simultaneous angle or RPM
measurements may be recorded. The DFI 2000 has multiple sampling
rates from 1 Hz to 10 KHz and storage for up to 8,000 data points.
There are 3 process control output signals, high, low, and target
occurrences. Cooper also offers an optional personality module,
which allows the indicator to calibrate itself to the transducer. The
DFI 2000 comes standard with rechargeable Ni-Cad batteries and
optional user interface software.
DFI 2000 - SHOWN WITH LXT 963
• 3 PEAK FUNCTIONS
• SELECTABLE ENGINEERING UNITS
• RS 232 OUTPUT
• 3 PROCESS CONTROL OUTPUT FEATURES
• RECHARGEABLE NI-CAD BATTERIES
DIGITAL FORCE INDICATOR
SPECIFICATIONS
GENERAL
• CHANNELS: 1
• TEMPERATURE (Operating): 32˚ to 132˚ C
• MATERIAL: Aluminum
• POWER REQUIRED: 110 Vac. Rechargeable 9.6V
Ni-Cad Batteries
• PEAK HOLD: 3 Peak Functions
• RS232: Standard (software optional)
• LIMIT FUNCTIONS: 3 Points, Hi, Lo, Target
TRANSDUCER
• EXCITATION: 7 Vdc
• INPUTS ACCEPTED: ±4.5 mv/v
• CALIBRATION METHOD: Front Key Pad, Software,
Personality Module
• BRIDGE RESISTANCE: 120 ohm min.
COOPER INSTRUMENTS & SYSTEMS
AMPLIFIER
• ACCURACY: 0.05% F.S.
• ANALOG OUTPUT: Up to 2.4 Vdc
(1 Vdc @ 2mv/v)
• SAMPLING RATE: 4 kHz - Track Mode
5 kHz - Peak Mode
Up to 10 kHz - Record Mode
DIGITAL DISPLAY
• DISPLAY: 4 digits (5 w/o Decimal)
• DISPLAY UPDATE: 4 Per Second (Track Mode)
• MAXIMUM DISPLAY: 99999
• POLARITY INDICATIONS: Yes
• DISPLAY SIZE: 0.25” High
• TYPE: LCD
PHYSICAL
• WEIGHT: 2.5 LBS
• DIMENSIONS: 1.75” H x 6” W x 8” D
www.cooperinstruments.com sales@cooperinstruments.com
1-800-344-3921
2/14/05
Loading...