Cooper Instruments DFI-200 Specifications

DFI 200 - HAND HELD INDICATOR

he model DFI 200 is a light weight hand-held indicator
powered by a single 9 volt battery making it ideal for remote

T

field operations. The DFI 200 features a 4 1/2 digit display max/
min recall and push-button calibration and set-up. This unit also features
RS232 serial communication and selectable digital filter. The DFI 200
stores up to 3 transducer calibrations with the optional auto calibration
chip which allows auto-calibration to any transducer.

• 3 INTERNALLY STORED CALIBRATIONS

• HAND-HELD CONVENIENCE

• BATTERY OPERATED

• MAX/MIN RECALL

• PUSH-BUTTON CALIBRATION

• RS232 SERIAL COMMUNICATIONS

• MULTI ENGINEERING UNIT DISPLAY

• OPTIONAL AUTO-CAL MODULES FOR
ADDITIONAL LOAD CELLS

• CONFIGURABLE SWITCH-OFF TIMER

DIGITAL FORCE INDICATOR

GENERAL

• CHANNELS:

• TEMPERATURE (Operating):

• TEMPERATURE (Storage):

• MATERIAL:

• POWER REQUIRED:

• MAX/MIN HOLD:

• RS232:

TRANSDUCER

• EXCITATION:

• INPUTS:

• CALIBRATION METHOD:

• BRIDGE RESISTANCE:

AMPLIFIER

• ANALOG OUTPUT:

• ACCURACY:

• SAMPLE RATE:

SPECIFICATIONS

DIGITAL DISPLAY

1 w/up to 3 stored Calibrations
32° to 122°

-20° to 150° F
Plastic Case
1 - 9V Battery
Standard
Standard

5 Vdc

0.5 to 100 mV/V
Push-Button or AutoCal
80 ohm min

None
±0.005% F.S. Dependent on
Sample Rate and mV Range
5 To 100 Per Sec. Selectable

• DISPLAY:

• DISPLAY UPDATE:

• MAXIMUM DISPLAY:

• POLAR INDICATIONS:

• DISPLAY SIZE:

• RESOLUTION:

• TYPE:

PHYSICAL

• WEIGHT:

• DIMENSIONS:

COOPER INSTRUMENTS & SYSTEMS

4 1/2 Digits
1 Per Second
19999
Yes

0.4" High
22 Bit
LCD

.5 lb

3.15" W x 5.7" H x 1.54" D

www.cooperinstruments.com [e-mail]

1-800-344-3921

2/25/08