Cooper Instruments DCM162 Specifications
DCI 9001 - DIGITAL TRANSDUCER AMPLIFIER
he DCI 9001 is the complete solution for interfacing load cells and
pressure transducers to any remote control system equipped with
T
serial communications port. The standard software package
permits numerical and graphic display of transducer output with a
sampling rate of 600 per second. A NEMA 4 enclosure allows installation
in harsh environments. Special features include: two limit value switches
and two peak value stores.
GENERAL
• CHANNELS:
• TEMPERATURE:
• MATERIAL:
• POWER REQUIRED:
TRANSDUCER
• EXCITATION:
• INPUTS ACCEPTED:
• CALIBRATION METHOD:
• BRIDGE RESISTANCE:
AMPLIFIER
• ACCURACY:
• OUTPUT:
• RESOLUTION:
• INTERNAL SAMPLING:
• OUTPUT MEASURING:
• FREQUENCY RESPONSE:
PHYSICAL
• DIMENSIONS:
1
-10˚ to 60˚ C
NEMA 4 Enclosure
7.8 to 15 Vdc, 60 ma
5 Vdc
±3.2 mv/v
Compute Keyboard
350 Ohms Min.
0.01% F.S.
Serial
24 Bit Max.
4.8 Khz
600 Hz Max.
150 Hz (W/O Digital Filter)
3.7" L x 2.1" W x 0.7" H
• BRIDGE TRANSDUCER AMPLIFIER
W/RS-232 INTERFACE
• 24 BIT RESOLUTION MAX.
• HIGH SPEED
DCI 9001
BRIDGE AMPLIFIERS
DCM 162 - BRIDGESENSOR W/MOUNTING BOARD
he DCM 162 bridgesensor is a complete signal conditioning
system. This module consists of a high performance
T
instrumentation amplifier, a user adjustable active filter and a high
stability bridge supply, which is mounted to the 8610 backplane to give
the user a multichannel signal conditioning system. The DCM 162
provides trim pots for coarse and fine gain along with input and output
offset adjustments, and DIP switches for setting the bridge supply output
and active low pass filter cutoff frequency. The 8610 backplane is a
convenient mounting system for up to eight of the DCM 162’s. The
backplane is available with either an AC line or a DC input power supply.
GENERAL
• CHANNELS: 8
• TEMPERATURE (Operating): -25˚+ to 70˚+ C
• MATERIAL: Plastic - DCM 160
• POWER REQUIRED: 115 Vac, 10 to 36 Vdc or 24 to 72 Vdc
TRANSDUCER
• EXCITATION: 4 to 10 Vdc
• INPUTS ACCEPTED: 2 mv to 5 Vdc
• CALIBRATION METHOD: Potentiometer
• BRIDGE RESISTANCE: 120 ohm min.
AMPLIFIER
• ACCURACY: ±0.05% F.S.
• ANALOG OUTPUT: ±10 Vdc adjustable
• GAIN RANGE: 100 to 500 v/v
2 to 5000 v/v W/Ext. Resistor
• BANDWIDTH: 10 Hz, 100 Hz, 1KHz
PHYSICAL
• WEIGHT: 2 lb DC Operation
3 lb AC Operation
• DIMENSIONS: 16.5" L x 7.5" W 5.5" H
(H dimension spec. w/modules in place.)
• COMPACT, COMPLETE AND CONVENIENT
TO USE
• UP TO 8 CHANNELS
• ACCEPTS HALF BRIDGE TRANSDUCERS
• SELECTABLE FILTER FREQUENCY
DCM 162
COOPER INSTRUMENTS & SYSTEMS
www.cooperinstruments.com sales@cooperinstruments.com
1-800-344-3921
4/21/04
Loading...