Cooper Instruments BGI Specifications
BGI - HAND HELD DIGITAL INDICATOR
• PEAK MEMORY HOLD
• ALARM LIMITS
• AVERAGING
• RAPID CHANGE OVER TO OTHER
TRANSDUCERS
• BUILT IN RS232 AND MITUTOYO SPC
PRINTER OUTPUT
he BGI is a low cost digital force and torque indicator offering a
fully automatic calibration to interchangeable force and torque
T
sensors. Each transducer comes with a “personality” module
that stores the calibration data. Simply plug the transducer into the
indicator and it is ready to use. This unique instrument packs many
features including; Peak memory, RS232, Mitutoyo, analog outputs and
programmable dual set points. The averaging mode permits
measurement of average force and torque over time. External trigger
mode permits freezing of display with an external signal permitting
switch and contact testing.
SPECIFICATIONS
CHANNELS:
TEMPERATURE:
MATERIAL:
POWER:
PEAK/VALLEY:
RS232:
HI/LO LIMITS:
TARE:
OUTPUT:
INPUTS:
CALIBRATION:
DISPLAY:
MAX. DISPLAY:
BRIDGE RESISTANCE:
ACCURACY:
SAMPLING RATE:
RESOLUTION:
WEIGHT:
1
60˚ to 110˚ F
Cast Aluminum
Rechargeable NiCad Battery
w/ AC Adaptor Included
Standard
Standard
Standard (Dual)
100%
0-1 Vdc
“Personality Module” Only
Push Button, Automatic
4 1/2 Digit LCD
19999
350 ohms
±0.10% F.S. ± LSC
65 per Second
1/2,500 Depending on Transducer
0.9 lbs
STANDARD TRANSDUCER RANGES
LSS - S-Beam Load Cells, Accuracy: ±.15% F.S. + BGI
50; 100; 200; 500; 1,000; 2,000; 5,000; 10,000 lbs
LSSM - Compact Load Cell, Accuracy: ±.15% F.S. + BGI
0.25; 0.5; 2; 10; 50; 100 lbs
LSTJ - Torque Sensor w/Chuck, Accuracy: ±.15% F.S. + BGI
10; 20; 50 in/oz
12; 50; 100 in/lb
LSTE - Socket Wrench Torque Sensor, Accuracy: ±.6% F.S. + BGI
200; 400; 1,000 5,000 in/lb
See page 8 for detailed drawings
Note: Other transducers from our product line may be used with
this system. Non-standard calibrations can be done upon request.
DIGITAL FORCE INDICATOR
COOPER INSTRUMENTS & SYSTEMS
MODEL CAPACITY x RESOLUTION A" B" C" D" F"
LSS 50 50.00 x 0.02 LB, 25.00 x 0.01 kgF, 250.0 x 0.1 N 2.40 2.00 .46 .65 1/4-28 UNF
LSS 100 100.00 x 0.05 LB, 50.00x 0.02 kgF, 500.0 x 0.2 N 2.40 2.00 .46 .65 1/4-28 UNF
LSS 200 200.0 x 0.1 LB, 100.00 x 0.05kgF, 1000.0 x 0.5 N 2.40 2.00 .46 .65 1/4-28 UNF
LSS 500 500.0 x 0.2 LB, 250.0 x 0.1kgF, 2500 x 1 N 2.40 2.00 .71 .90 1/2-20 UNF
LSS 1000 1000.0 x 0.5 LB, 500.0 x 0.2 kgF, 5000 x 2 N 2.40 2.00 .71 .90 1/2-20 UNF
LSS 2000 2000 x 1 LB, 1000.0 x 0.5 kgF, 10000 x 5 N 2.40 2.00 .96 1.15 1/2-20 UNF
LSS 5000 5000 x 2 LB, 2500 x 1kgF, 25000 x 10 N 3.90 3.00 .96 1.15 3/4-16 UNF
LSS 10000 10000 x 5 LB, 5000 x 2 kgF, 50000 x 20 N 3.90 3.00 .96 1.15 3/4-16 UNF
www.cooperinstruments.com sales@cooperinstruments.com
1-800-344-3921
1/26/07
LSSM - COMPACT LOAD CELL
MODEL CAPACITY x RESOLUTION
LSSM025 0.25 x 0.0001 LB, 100 x 0.05 g, 1 x 0.0005 N
LSSM05 0.5 x 0.0002 LB, 250 x 0.1 g, 2.5 x 0.001 N
LSSM 2 2 x 0.001 LB, 1 x 0.0005 kg, 10 x 0.005 N
LSSM 5 5 x 0.002 LB, 2.5 x 0.001 kg, 25 x 0.01 N
LSSM 10 10 x 0.005 LB, 5 x 0.002 kg, 50 x 0.02 N
LSSM 20 20 x 0.01 LB, 10 x 0.005 kg, 100 x 0.05 N
LSSM 50 50 x 0.02 LB, 25 x 0.01 kg, 250 x 0.1 N
LSSM 100 100 x 0.05 LB, 50 x 0.02 kg, 500 x 0.2 N
LSTJ - TORQUE SENSOR W/CHUCK
RETRACTED LENGTH
LOAD CELLS
IN [MM]
MODEL CAPACITY x RESOLUTION A" CHUCK CAPACITY
LSTJ 10 10.00 x 0.01 IN/OZ, 7.000 x 0.005 Kgmm, 7.000 x 0.005 Ncm 4.82 0.375
LSTJ 20 20.00 x 0.02 IN/OZ, 14.00 x 0.01 Kgmm, 14.00 x 0.01 Ncm 4.82 0.375
LSTJ 50 50.00 x 0.05 IN/OZ 36.00 x 0.05 Kgmm, 35.00 x 0.05 Ncm 4.82 0.375
LSTJ 12 12.00 x 0.01 IN/LB, 140.0 X 0.1 Kgmm, 135.0 x 0.1 Ncm 5.19 0.50
LSTJ 50 50.00 x 0.05 IN/LB, 580.0 x 0.5 Kgmm, 570.0 x 0.5 Ncm 5.19 0.50
LSTJ 100 100.0 x 0.1 IN/LB, 1150 X 1 Kgmm, 1150 x 1 Ncm 5.19 0.50
LSTE - SOCKET WRENCH TORQUE SENSOR
COOPER INSTRUMENTS & SYSTEMS
MODEL CAPACITY x RESOLUTION A" B DIA C DIA" Drive Size
STE20 20 X 0.02 lbin, 230 X 0.2 kgFmm, 220 X 0.2 Ncm 1.88 0.56 1.00 1/4"
STE50 50 X 0.05 lbin, 580 X 0.5 kgFmm, 570 X 0.05 Ncm 1.88 0.56 1.00 1/4"
STE100 100 X 0.1 lbin, 1150 X 1 kgFmm, 1150 X 1 Ncm 1.88 0.56 1.00 1/4"
LSTE 200 200.0 X 0.2 lbin, 2300 X 2 kgmm, 2200 X 2 Ncm 3.00 [76.2] 0.73 [18.5] 1.12 [28.6] 3/8"
LSTE 400 400.0 X 0.5 lbin, 4600 X 5 kgmm, 4500 X 5 Ncm 3.00 [76.2] 0.73 [18.5] 1.12 [28.6] 3/8"
LSTE 1000 1000 X 1 lbin, 11500 X 10 kgmm, 11000 X 10 Ncm 3.50 [88.9] 0.98 [24.9] 1.25 [31.8] 1/2"
LSTE 5000 5000 X 5 lbin, 55.00X 0.05 kgm, 550.0 X 0.5 Nm 5.00 [127.0] 1.48 [37.6] 2.0 [50.8] 3/4"
Loading...