U FORCE GAGES - SLIM LINE DESIGN
he model U force gage is an accurate ±1% mechanical
compression force measurement instrument. This gage
T
employs a deflection beam machined from aircraft quality alloy
steel and heat treated to develop optimum strength and spring
characteristics. A precision dial indicator is mounted at the null point of
this beam. The force is applied to a pressure fitting, mounted on the
upper half of the beam. There are four types of fittings: domed, cupped,
flat or a flat nylon insert. The flat bottom gages require only one fitting
while the recessed bottom gages have a top and bottom. When the load
is applied the beam moves downward causing a slanted anvil on the free
end to push against the indicator plunger. The corresponding reading is
a direct representation of the applied load. The U force gage is available
in pounds, kilograms or newtons. There are 9 capacities ranging from
25 x .25 lbs to 10,000 x 100 lbs. On the low range models, capacities 25
to 250 lb, you can choose between flat and bottom and recessed design.
On the upper ranges, only the flat bottom design is available.
SPECIFICATIONS
LOAD RANGES:
ACCURACY:
ZERO CAPACITY:
SAFETY FACTOR:
25 lb to 10,000 lbs
0 kg to 5,000 kg.
±1% of full range
12, 3, 6 or 9 o'clock position
6 o'clock is standard position
30% of F.S.
• FLAT OR RECESSED
BOTTOM GAGE
•MAXIMUM POINTER
•SHOCKLESS DIAL INDICATOR
•DIAL ORIENTATION
0°, 900°, 1800°, 2700°
U FORCE GAGES
HIGH-RANGE MODEL U FORCE GAUGE
PART NUMBER ABCDEF GHJN
lb in. in. in. in. in. in. in. in. in. in.
(kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
30482-0020 500x5 3.87 6.75 .98 .49 1.25 .92 1.52 1.67 2.44 2.2
-- -- (98.0) (171.3) (24.9) (12.4) (31.5) (23.6) (38.6) (42.4) (63.5) (57.2)
30482-0053 1,000x10 3.87 6.75 .98 .49 1.25 .92 1.52 1.67 2.44 2.2
(30482-0079) (500x5) (98.0) (171.3) (24.9) (12.4) (31.5) (23.6) (38.6) (42.4) (63.5) (57.2)
30478-0018 2,000x20 4.74 7.94 .98 .49 1.72 1.41 2.06 2.06 2.88 2.75
(30478-0042) (1,000x10) (120.1) (201.5) (24.9) (12.4) (43.7) (35.5) (52.3) (52.3) (72.8) (69.9)
COOPER INSTRUMENTS & SYSTEMS
30478-0034 5,000x50 3.28 7.94 .98 .49 1.72 1.41 2.06 2.06 2.88 2.75
-- -- (120.1) (201.5) (24.9) (12.4) (43.7) (35.5) (52.3) (52.3) (72.8) (69.9)
30432-0039 10,000x100 4.35 9.19 1.44 .72 2.12 1.82 2.31 2.32 3.72 3.62
(30432-0054) (5,000x50) (110.2) (233.2) (36.5) (18.3) (53.8) (46.0) (58.6) (58.9) (94.4) (91.9)
www.cooperinstruments.com sales@cooperinstruments.com
1-800-344-3921
11/17/03
U FORCE GAGES - SLIM LINE DESIGN
LOW-RANGE RECESSED-BOTTOM MODEL U FORCE GAUGE
PART NO. ABCDEF GHJ KL MN
lb in. in. in. in. in. in. in. in. in. in. in. in. in.
(kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
30489-0015 25x.25 3.28 5.50 .73 .36 .97 .56 .90 1.40 1.87 .46 .094 .349 1.67
(30486-0064) (10x.1) (83.3) (139.6) (18.5) (9.1) (24.6) (14.2) (22.8) (35.5) (47.5) (11.7) (2.4) (8.9) (42.4)
30489-0023 50x.5 3.28 5.50 .73 .36 .97 .56 .90 1.40 1.87 .46 .094 .349 1.67
(30489-0072) (25x.25) (83.3) (139.6) (18.5) (9.1) (24.6) (14.2) (22.8) (35.5) (47.5) (11.7) (2.4) (8.9) (42.4)
30489-0031 100x1 3.28 5.50 .73 .36 .97 .56 .90 1.40 1.87 .46 .094 .349 1.67
(30489-0080) (50x.5) (83.3) (139.6) (18.5) (9.1) (24.6) (14.2) (22.8) (35.5) (47.5) (11.7) (2.4) (8.9) (42.4)
30489-0056 250x2.5 3.28 5.50 .73 .36 .97 .56 .90 1.40 1.87 .46 .094 .349 1.67
(30489-0098) (100x.1) (83.3) (139.6) (18.5) (9.1) (24.6) (14.2) (22.8) (35.5) (47.5) (11.7) (2.4) (8.9) (42.4)
LOW-RANGE FLAT-BOTTOM MODEL U FORCE GAUGE
PART NO. ABCDEF GHJKLMN
lb in. in. in. in. in. in. in. in. in. in. in. in. in.
(kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
30354-0017 25x.25 3.28 5.50 .73 .36 .97 .56 .90 1.40 1.87 .46 .094 .349 1.67
(30354-0066) (10x.1) (83.3) (139.6) (18.5) (9.1) (24.6) (14.2) (22.8) (35.5) (47.5) (11.7) (2.4) (8.9) (42.4)
30354-0025 50x.5 3.28 5.50 .73 .36 .97 .56 .90 1.40 1.87 .46 .094 .349 1.67
(30354-0074) (25x.25) (83.3) (139.6) (18.5) (9.1) (24.6) (14.2) (22.8) (35.5) (47.5) (11.7) (2.4) (8.9) (42.4)
30354-0033 100x1 3.28 5.50 .73 .36 .97 .56 .90 1.40 1.87 .46 .094 .349 1.67
(30354-0082) (50x.5) (83.3) (139.6) (18.5) (9.1) (24.6) (14.2) (22.8) (35.5) (47.5) (11.7) (2.4) (8.9) (42.4)
30354-0058 250x2.5 3.28 5.50 .73 .36 .97 .56 .90 1.40 1.87 .46 .094 .349 1.67
(30354-0090) (100x.1) (83.3) (139.6) (18.5) (9.1) (24.6) (14.2) (22.8) (35.5) (47.5) (11.7) (2.4) (8.9) (42.4)
www.cooperinstruments.com sales@cooperinstruments.com
1-800-344-3921
Loading...