Cooper B-Line Type 3 Enclosures, Type 3R Enclosures Catalog Page

Type 3 / 3R Enclosures

Type 3R Telephone Termination Cabinets

Data Sheet

Construction

• Cabinet and door are fabricated from 14 gauge galvaneal steel

• Knockouts are furnished on the bottom end for access into the
cable splicing compartment, (refer to drawing)

• Door is held rigid with stiffeners

• Door is secured to the body with a continuous hinge and
stainless steel pin on one side and a hex head flush latch
on the opposite side

• Fixed barrier with access knockouts and separate cover
isolates the cable splicing compartment

• .75 thick plywood back board is factory mounted

Type 3/3R Enclosures

Application

• Used as telephone and communication cable
termination cabinet

Standards

• Conforms to Mountain Bell Standard

• Conforms to NEMA standard for Type 3R

• IEC 60529, IP32

Cabinet Cabinet Size Wood

Catalog A x B x C Height x Width
Number

26245 MBTC 26.00x24.00x5.00 660x610x127 23.00x15.00 584x381
36305 MBTC 36.00x30.00x5.00 914x762x127 33.00x21.00 838x533
36365 MBTC 36.00x36.00x5.00 914x914x127 33.00x27.00 838x686
26246 MBTC 26.00x24.00x6.00 660x610x152 23.00x15.00 584x381
36306 MBTC 36.00x30.00x6.00 914x762x152 33.00x21.00 838x533
36366 MBTC 36.00x36.00x6.00 914x914x152 33.00x27.00 838x686

Finish

• Wash and phosphate undercoat

• ANSI 61 gray acrylic electrocoat finish

Accessories

• Terminal blocks

• Touch-up paint

• See Accessories section

Height x Width x Depth

in. mm in. mm

Panel Size

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

92