Cooper B-Line Type 12 Panel Enclosures, Type 13 Panel Enclosures Catalog Page
Type 12 / 13 Panel Enclosures
Wall-Mount Enclosures
Type 12 Single-Door
Data Sheet
Type 12/13 Panel Encl.
Application
• Houses electrical controls and instruments
• Protects against circulating dust, falling dirt and
dripping non-corrosive liquids
Standards
• UL 508 listed, Type 12 and Type 13
• CSA C22.2 No.94 certified, Type 12 and Type 13
• Conforms to NEMA standard for Type 12 and Type 13
Finish
• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories
• Panels
• NEMA terminal strap kit
• Terminal blocks
• Type 12 door handle kit
• Floor stand kit
• Touch-up paint
• See Accessories section
Construction
• Enclosure and door are fabricated from code gauge steel,
(see tables, pages 106 & 107)
• All continuous welded seams are finished smooth
• Doors are secured to the body with a heavy-duty continuous
hinge on one side and easy-to-release door clamps mounted
to the opposite side
• Each door has a padlock hasp with sealing hole provision
• Print pocket provided
• Door has a seamless poured in-place gasket
• Ground stud provided on door
• Formed lip around enclosure opening diverts liquids and
contaminants
• .375-16 collar studs are provided for mounting optional panel
• External mounting feet are provided for secure wall mounting
Discount Schedule: C2
Subclass: DH0
Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
104
Electrical Enclosures
Wall-Mount Enclosures
Type 12 Single-Door
Illustration Sheet
See pages 106 & 107 for dimensions
B
B (**B)
Type 12 / 13 Panel Enclosures
∅ .44
A-2.75
(70)
(11)
mounting
hole (2PL)
3.50
(89)
padlock hasp
C
X
A+1.25
print pocket (supplied)
(32)
A-4.75
(121)
A
B-2.75
(70)
C
L
Front View
B-4.75
(121)
C
L
door clamp
(omit center clamp where
"A" is less than 48)
3.50
(89)
mounting feet
.375-16 collar stud
(omit center studs where
"A" is less than 36)
C
L
C
Type 12/13 Panel Encl.
optional panel
X
Side View
Electrical Enclosures
.375-16 collar stud
(omit center studs where
"B" is less than 36)
Note:
Dimensions: **B = (-2.50) if 12 inches wide;
C
L
(-6.00) if wider than 12 inches.
Section X-X
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
105
Loading...