Cooper B-Line Shields Saddles User Manual

Pipe Supports, Guides, Shields & Saddles

Shields & Saddles

Supports, Guides,

Pipe supports offered in this section are designed to support pipe from a base structure where vertical adjustment may be
required. Pipe guides and slides are designed to allow longitudinal movement due to thermal expansion and contraction of pipe.
Protection shields and saddles are designed to prevent damage to pipe insulation.

Materials

Carbon Steel is used in the manufacturing of pipe supports, guides, shields and saddles. Stainless Steel and other materials
are available.

Finishes

The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated
Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, DURA GREEN™and other special
coatings are available upon request.

Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly

coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied
Electro-Plated, Copper plated, or in Stainless Steel.

Approvals (as noted)

Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58.

All pipe supports in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel items may be specially
fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. See pipe data charts on pages 321 thru 325 for proper size
selection.

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

126

B-Line series Pipe Hangers & SupportsEaton

Pipe Supports, Guides, Shields & Saddles

B3380 thru B3387
360° Calcium Silicate Shield
Pre-Insulated Support

Standard Temperature Type

Size Range: Up to 24” (600mm)

Material: Asbestos-free, Hydrous Calcium Silicate

Insulation with Pre-Galvanized steel jacket

Function: Designed to provide a crush resistant
insulation insert at pipe support points. Can be used
with hangers or straps.
Standard type has functionality for both chilled water
and hot water.

Miscellaneous Information: Flame retardant, water
and rot resistant, temperature range from -20°F
to 1200°F (649°C). Easily installed in a pipe hanger or
mounted to strut.

Order By: Part number.
(See part number legend below.)
For additional information, contact factory.

Applications

(-29°C)

Supports, Guides,

Shields & Saddles

B338 0 CT - 3

Prefix Insulation Thickness Pipe Type Pipe Size

B338 0=1/2” (13mm) CT = Copper Tubing Sizes Nominal Pipe

Commercial Duty, 2=1”

All Purpose Support * 3=1

* Other models available 7=4” (101mm)

Consult Factory

(25mm) Blank = Std. Sch. 40 Steel or

1

/2” (38mm) Copper Tubing Size
4=2” (51mm)
6=3” (76mm)

Pipe Hanger

Strut Mounted

Note:

Up to 24”

pipe size

(600mm)

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

B-Line series Pipe Hangers & Supports

127

Eaton

Pipe Supports, Guides, Shields & Saddles

B3088 - Base Stand

Size Range:3/4" (20mm) thru 6" (150mm) pipe

Material: Steel

Shields & Saddles

Supports, Guides,

Function: Designed as an unthreaded base stand for

pipe supports B3090, B3094, B3095, B3096, B3097 and
B3098.

Finish: Plain or Electro-Galvanized. Contact customer
service for alternative finishes and materials.

Order By: Part number, height and finish.

Note: Match B3088 part number with dimension 'D' from B3090, B3094, B3095, B3096, B3097 or B3098 charts.

Plate Size Stand Pipe Size A Dia. H Approx. Wt./100*

Part No. in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kg)

B3088-3/4

B3088-1

B3088-11/4

B3088-11/2

B3088-2

B3088-21/2

B3088-3

B3088-4

B3088-6

1

/4" x 6" x 6" (6.3 x 152.4 x 152.4)

1

/4" x 6" x 6" (6.3 x 152.4 x 152.4) 1" (25)

1

/4" x 6" x 6" (6.3 x 152.4 x 152.4) 11/4” (32)

1

/4" x 6" x 6" (6.3 x 152.4 x 152.4) 11/2" (40)

1

/4" x 6" x 6" (6.3 x 152.4 x 152.4) 2" (50)

3

/8" x 8" x 8" (9.5 x 203.2 x 203.2) 21/2" (65) 11/4" (31.7)

3

/8" x 12" x 12" (9.5 x 203.2 x 203.2) 3" (80) 11/2" (38.1)

1

/2" x 12" x 12" (12.7 x 304.8 x 304.8) 4" (100) 11/2" (38.1)

1

/2" x 18" x 18" (12.7 x 304.8 x 304.8) 6" (150) 11/2" (38.1) 11/8" (28.6) 7378 (3346.6)

3

/4" (20)

7

/8" (22.2)

7

/8" (22.2)

7

/8" (22.2)

7

/8" (22.2)

7

/8" (22.2)

**Height from top

of pipe to bottom of

plate.

**Specify

Height

Plate Size

3

/4" (14.3) 420 (190.5)

3

/4" (14.3) 480 (216.0)

3

/4" (14.3) 590 (267.6)

3

/4" (14.3) 655 (297.1)

3

/4" (14.3) 1211 (549.3)

13

/16" (14.3) 2376 (1077.7)

13

/16" (20.6) 3137 (1422.9)

15

/16" (23.8) 4338 (1967.7)

Stand Pipe Size

H

4 Holes

A

A

*Based on a height of 18" (457.2mm).

B3088T - Threaded Base Stand

Size Range: 1" (25mm) thru 4" (100mm) pipe

**Height from top

of pipe to bottom of

plate.

Material: Steel

Function: Designed as a threaded base stand where

vertical adjustment is required for pipe supports B3089,
B3092, and B3093.

Finish: Plain or Electro-Galvanized. Contact customer
service for alternative finishes and materials.

Order By: Part number, height and finish.

Plate Size

Note: Match B3088T part number with dimension 'D' from B3089, B3092, and B3093 charts.

Plate Size Stand Pipe Size A Dia. H TL Approx. Wt./100*

Part No.

B3088T-1

B3088T-11/4

B3088T-11/2

B3088T-2

B3088T-21/2

B3088T-3

B3088T-4

in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kg)

1

/4

"x 6"x 6" (6.3 x 152.4 x 152.4) 1"

1

/4

"x 6"x 6" (6.3 x 152.4 x 152.4) 11/4

1

/4

"x 6"x 6" (6.3 x 152.4 x 152.4) 11/2

1

/4

"x 6"x 6" (6.3 x 152.4 x 152.4) 2"

3

/8

"x 8"x 8" (9.5 x 203.2 x 203.2) 21/2

3

/8

"x 12"x 12" (9.5 x 304.8 x 304.8) 3"

1

/2

"x 12"x 12" (12.7 x 304.8 x 304.8) 4"

"

"

"

(25)

(32)

(40)

(50)

(65)

(80)

(100)

7

/8" (22.2)

7

/8" (22.2)

7

/8" (22.2)

7

/8" (22.2)

11/4

" (31.7)

11/2

" (38.1)

11/2

" (38.1)

3

/4" (19.0)

3

/4" (19.0)

3

/4" (19.0)

3

/4" (19.0)

13

/16"

(20.6) 1

13

/16

" (20.6) 11/2

15

/16

" (23.8) 2" (50.8) 3594 (1630.2)

**Specify

Height

11/2

" (38.1) 495 (224.5)

11/2

" (38.1) 583 (264.4)

11/2

" (38.1) 649 (294.4)

11/2

" (38.1) 785 (356.1)

1

/2

" (38.1) 1524 (691.3)

" (38.1) 2624 (1190.2)

TL

Thread Length

Stand Pipe Size

H

4 Holes

A

A

B3988T-1 and B3088T-11/4 can not be used with B3089, B3092 , and B3093.
*Based on a height of 18" (457.2mm).

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

128

B-Line series Pipe Hangers & SupportsEaton

Pipe Supports, Guides, Shields & Saddles

B3088S - Seismic Base Stand

Size Range:3/4" (20mm) thru 4" (100mm) pipe

Material: Steel

Function: Designed as an unthreaded base stand for

**Height from

top of pipe to

bottom of plate.

**Specify

Height

pipe supports, B3090, B3094, B3095, B3096, B3097 and
B3098, to meet requirements of 12X anchor diameter
hole spacing for seismic applications. The standard
B3088-3 & B3088-6 already meet this requirement.

Finish: Plain or Electro-Galvanized. Contact customer

Plate Size

service for alternative finishes and materials.

Order By: Part number, height and finish.

Note: Match B3088S part number with dimension 'D' from B3090, B3094, B3095, B3096, B3097 or B3098 charts.

Plate Size Stand Pipe Size A Dia. H Approx. Wt./100*

Part No.

B3088S-3/4

B3088S-1

B3088S-11/4

B3088S-11/2

B3088S-2

B3088S-21/2

B3088S-4

in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kg)

1

/4" x 8" x 8" (6.3 x 203.2 x 203.2)

1

/4" x 8" x 8" (6.3 x 203.2 x 203.2) 1" (25) 1" (25.4)

1

/4" x 8" x 8" (6.3 x 203.2 x 203.2) 11/4” (20) 1" (25.4)

1

/4" x 8" x 8" (6.3 x 203.2 x 203.2) 11/2" (32) 1" (25.4)

1

/4" x 8" x 8" (6.3 x 203.2 x 203.2) 2" (50) 1" (25.4)

3

/8" x 81/2" x 81/2" (9.5 x 215.9 x 215.9) 21/2" (65) 11/4" (31.7) 9/16" (14.3) 1638 (743.0)

1

/2" x 131/2" x 131/2" (12.7 x 342.9 x 342.9) 4" (100) 11/2" (38.1)

3

/4" (20) 1" (25.4)

9

/16" (14.3) 618 (280.3)

9

/16" (14.3) 708 (321.1)

9

/16" (14.3) 798 (362.0)

9

/16" (14.3) 858 (389.2)

9

/16" (14.3) 993 (450.4)

15

/16" (23.8) 4202 (1906.0)

Stand Pipe Size

H

4 Holes

A

A

Supports, Guides,

Shields & Saddles

*Based on a height of 18" (457.2mm).

B3088ST - Threaded Seismic Base Stand

Size Range: 1"

(25mm) thru 4" (100mm) pipe

**Height from

top of pipe to

bottom of plate.

Material: Steel

Function: Designed as a threaded base stand where vertical

adjustment is required for pipe supports B3089, B3092, and
B3093, to meet requirements of 12X anchor diameter hole
spacing for seismic applications. The standard B3088T-3 &
B3088T-6 already meet this requirement.

Finish: Plain or Electro-Galvanized. Contact customer service
for alternative finishes and materials.

Plate Size

Order By: Part number, height and finish.

Note: Match B3088ST part number with dimension 'D' from B3089, B3092, and B3093 charts.

Plate Size Stand Pipe Size A Dia. H TL Approx. Wt./100*

Part No.

B3088ST-1

B3088ST-11/4

B3088ST-11/2

B3088ST-2

B3088ST-21/2

B3088ST-4

in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kg)

1

/4" x 8" x 8" (6.3 x 203.2 x 203.2)

1

/4" x 8" x 8" (6.3 x 203.2 x 203.2)

1

/4" x 8" x 8" (6.3 x 203.2 x 203.2)

1

/4" x 8" x 8" (6.3 x 203.2 x 203.2)

3

/8" x 81/2" x 81/2" (9.5 x 215.9 x 215.9)

1

/2" x 131/2" x 131/2" (12.7 x 342.9 x 342.9)

1" (25) 1" (25.4)9/16

11/4

" (32) 1" (25.4)9/16

11/2

" (40) 1" (25.4)9/16

2" (50) 1" (25.4)9/16

21/2

" (65) 11/4

4" (100) 11/2

" (31.7)9/16

" (38.1)15/16

TL

Thread Length

**Specify

Height

" (14.3) 11/2

" (14.3) 11/2

" (14.3) 11/2

" (14.3) 11/2

" (14.3) 11/2

" (38.1) 708 (321.1)

" (38.1) 798 (362.0)

" (38.1) 858 (389.2)

" (38.1) 993 (450.4)

" (38.1) 1638 (743.0)

Stand Pipe Size

H

4 Holes

A

A

" (23.8) 2" (50.8) 4202 (1906.0)

*Based on a height of 18" (457.2mm).

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

B-Line series Pipe Hangers & Supports

129

Eaton

Pipe Supports, Guides, Shields & Saddles

B3096 - Adjustable Pipe Saddle Support

Size Range: Size 2" (505mm) thru 12" (300mm) pipe

Material: Steel

Shields & Saddles

Supports, Guides,

Function: Designed to support horizontal pipe from

floor stanchion where vertical adjustment is required.

Approvals:

WW-H-171E & A-A-1192A, Type 39 and
Manufacturers Standardization Society ANSI/MSS
SP-69 & SP-58, Type 38.

Maximum Temperature: 650°F

Finish: Plain. Contact customer service for alternative

finishes and materials.

Order By: Part number, pipe size and finish

Conforms to Federal Specification

(343°C)

Steel Size

A

Thread Size

Hex Nut Included

Shank will fit into Sch. 40

Pipe Size ‘D’ (not included)

8"

(203.2)

Pipe Size Max. Pipe O.D. Thread D Steel Size Approx. Wt./100

Part No. in. (mm) in. (mm) Size A in. (mm) in. (mm) Lbs. (kg)

B3096-2 2" (50) 23/8" (60.3)

B3096-3 3" (80) 31/2" (88.9)

7

/8"-9 1" (25)

7

/8"-9 1" (25)

B3096-4 4" (100) 41/2" (114.3) 1"-8 1" (25)

B3096-5 5" (125) 59/16" (141.3) 1"-8 1" (25)

B3096-6 6" (150) 65/8" (168.3) 11/4"-7 11/4" (32)

B3096-8 8" (200) 85/8" (219.1) 11/4"-7 11/4" (32)

B3096-10 10" (250) 103/4" (273.0) 11/2"-6 11/2" (40)

B3096-12 12" (300) 123/4" (323.8) 11/2"-6 11/2" (40)

3

/8" x 2" (9.5 x 50.8) 212 (96.1)

3

/8" x 2" (9.5 x 50.8) 259 (117.5)

3

/8" x 3" (9.5 x 76.2) 370 (167.8)

3

/8" x 3" (9.5 x 76.2) 404 (183.2)

1

/2" x 31/2" (12.7 x 88.9) 714 (323.9)

1

/2" x 31/2" (12.7 x 88.9) 819 (371.5)

1

/2" x 4" (12.7 x 101.6) 1194 (541.6)

1

/2" x 4" (12.7 x 101.6) 1315 (596.5)

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

130

B-Line series Pipe Hangers & SupportsEaton

Pipe Supports, Guides, Shields & Saddles

B3089 - Pipe Adjuster

Size Range: For use with 11⁄2" (40mm) thru 36" (900mm) pipe

Material: Steel

Function: Straight threaded shank that permits adjustment

after installation

Maximum Temperature: 650°F

Finish: Plain. Contact B-Line for alternative finishes and

materials.

Order By: Part number and finish

(343°C)

B

Pipe Size

Supports, Guides,

Shields & Saddles

Note:

If combining a Figure B3089 (Pipe adjuster) with a Figure B3090
(Pipe Support - pages 132 & 133) the catalog number will
become a Figure B3092 (see pages 136 & 137).

If combining a Figure B3089 (Pipe adjuster) with a Figure B3095
(Pipe Support Saddle - pages 134 & 135) the catalog number will
become a Figure B3093 (see pages 138 & 139).

To Support Pipe Size BDApprox. Wt./100

Part No.

B3089-3/4 11/2" - 2" (40 - 50)

in. (mm) in. (mm) in. (mm) Lbs. (kg)

3

/4" (20) 11/2" (40) 140 (63.5)

B3089-11/2 21/2" - 31/2" (65 - 90) 11/2" (40) 21/2" (65) 400 (181.4)

B3089-21/2 4" - 12" (100 - 300) 21/2" (65) 3" (80) 700 (317.5)

B3089-3 14" - 16" (350 - 400) 3" (80) 4" (100) 1000 (453.6)

B3089-4 18" - 36" (450 - 900) 4" (100) 6" (150) 2200 (997.9)

Nominal pipe size of base

D

stand - not included

When determining base stand height, add 6” (152.4mm) to the “C” dimension of the support
being utilized on B3090, B3095, B3097, and B3094 pipe and flange supports.
This will provide a vertical adjustment capability of 2

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

B-Line series Pipe Hangers & Supports

1

/4” (57.1mm) each direction.

131

Eaton

Pipe Supports, Guides, Shields & Saddles

B3090 - Pipe Support with U-Bolt

Size Range:3/4" (20mm) thru 36" (900mm) pipe

Material: Steel

Shields & Saddles

Supports, Guides,

Function: Designed to support horizontal pipe from floor stanchion.

U-bolts and hex nuts are provided to hold pipe securely to saddle. To
complete floor stanchion, use with B3088 pipe stand.

Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 38 and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 37

Maximum Temperature: 750°F

(399°)

Finish: Plain. Contact customer service for alternative finishes and
materials.

Order By: Part number and finish

Note: For vertical adjustment see Figure B3092 (pages 136 & 137)

Pipe Size Max. O.D. of Pipe Steel Size A

Part No.

B3090-3/4
B3090-1 1" (25) 13/8" (34.9)

in. (mm) in. (mm) in. (mm) in. (mm)

3

/4" (20) 13/8" (34.9)

1

1

B3090-11/4 11/4" (32) 111/16" (42.9)
B3090-11/2 11/2" (40) 2" (50.8)
B3090-2 2" (50) 27/16" (61.9)
B3090-21/2 21/2" (65) 27/8" (73.0)
B3090-3 3" (80) 31/2" (88.9)
B3090-31/2 31/2" (90) 4" (101.6)
B3090-4 4" (100) 47/8" (123.8)
B3090-5 5" (125) 55/8" (142.9)
B3090-6 6" (150) 629/32" (175.4)
B3090-8 8" (200) 91/8" (231.8)
B3090-10 10" (250) 113/32" (281.8)
B3090-12 12" (300) 133/16" (335.0)

3

3

1

1

1

1

B3090-14 14" (350) 14" (355.6)
B3090-16 16" (400) 16" (406.4)
B3090-18 18" (450) 18" (457.2)
B3090-20 20" (500) 20" (508.0)
B3090-24 24" (600) 24" (609.6) 1" x 5" (25.4 x 127.0) 1"
B3090-30 30" (750) 30" (762.0) 1" x 5" (25.4 x 127.0) 1"
B3090-36 36" (900) 36" (914.4) 1" x 5" (25.4 x 127.0) 1"

* Shank will fit into nominal
Schedule 40 pipe size 'D' of

/4" x 11/2" (6.3 x 38.1)
/4" x 11/2" (6.3 x 38.1)

1

/4" x 2" (6.3 x 50.8)

1

/4" x 2" (6.3 x 50.8)

1

/4" x 2" (6.3 x 50.8)

1

/4" x 3" (6.3 x 76.2)

1

/4" x 3" (6.3 x 76.2)

1

/4" x 3" (6.3 x 76.2)
/8" x 31/2" (9.5 x 88.9)
/8" x 31/2" (9.5 x 88.9)
/2" x 31/2" (12.7 x 88.9)
/2" x 31/2" (12.7 x 88.9)
/2" x 31/2" (12.7 x 88.9)
/2" x 31/2" (12.7 x 88.9)

5

/8" x 4" (19.0 x 101.6)

5

/8" x 4" (19.0 x 101.6)

3

/4" x 5" (19.0 x 127.0) 1"

3

/4" x 5" (19.0 x 127.0) 1"

C

4"

(101.6)

C

Center of pipe to

bottom lip of support.

Base Stand Figure B3088

(not included).

1

/4" (6.4)

1

/4" (6.4)

3

/8" (9.5)

3

/8" (9.5)

3

/8" (9.5)

1

/2" (12.7)

1

/2" (12.7)

1

/2" (12.7)

1

/2" (12.7)

1

/2" (12.7)

5

/8"

(15.9)

5

/8"

(15.9)

3

/4"

(19.0)

7

/8"

(22.2)

7

/8"

(22.2)

7

/8"

(22.2)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)

A

U-Bolt Dia.

Steel Size

Gussets on sizes B3090-8

and larger.

B (Shank Dia.)

Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3090DI - size.

3”

(80) ductile iron uses B3090-3

Not available for 36” (900) ductile iron pipe size

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

1

/2

132

B-Line series Pipe Hangers & SupportsEaton

B3090 - Pipe Support with U-Bolt cont.

Pipe Supports, Guides, Shields & Saddles

A

U-Bolt Dia.

C

Steel Size

4"

(101.6)

Gussets on sizes B3090-8

and larger.

B (Shank Dia.)

Supports, Guides,

Shields & Saddles

C

Center of pipe to

bottom lip of support.

* Shank will fit into nominal
Schedule 40 pipe size 'D' of

Base Stand Figure B3088

Note: For vertical adjustment see Figure B3092 (pages 136 & 137)

BC D * Approx. Wt./100

Part No. in. (mm) in. (mm) in. (mm) Lbs. (kg)

B3090-3/4
B3090-1
B3090-11/4
B3090-11/2
B3090-2

3

/4" (19.0) 2" (50.8)

3

/4" (19.0) 25/32" (54.8)

3

/4" (19.0) 221/64" (59.1)

3

/4" (19.0) 21/2" (63.5)

3

/4" (19.0) 211/16" (68.3)

3

/4" (19) 107 (48.5)

3

/4" (19) 117 (53.1)

3

/4" (19) 149 (67.6)

3

/4" (19) 166 (75.3)

3

/4" (19) 186 (84.4)

B3090-21/2 15/16" (33.3) 31/8" (79.4) 11/2" (40) 251 (113.8)
B3090-3 15/16" (33.3) 37/16" (87.3) 11/2" (40) 316 (143.3)
B3090-31/2 15/16" (33.3) 311/16" (93.7) 11/2" (40) 317 (143.8)
B3090-4 23/8" (60.3) 41/16" (103.2) 21/2" (65) 586 (265.8)
B3090-5 23/8" (60.3) 417/32" (115.1) 21/2" (65) 621 (281.7)
B3090-6 23/8" (60.3) 55/16" (134.9) 21/2" (65) 895
B3090-8 23/8" (60.3) 63/4" (171.4) 21/2" (65) 1115
B3090-10 23/8" (60.3) 713/16" (198.4) 21/2" (65) 1423
B3090-12 23/8" (60.3) 813/16" (223.8) 21/2" (65) 1846
B3090-14 27/8" (73.0) 109/16" (268.3) 3" (80) 2593
B3090-16 27/8" (73.0) 119/16" (293.7) 3" (80) 2825
B3090-18 4" (101.6) 139/16" (344.5) 4" (100) 4843
B3090-20 4" (101.6) 149/16" (369.9) 4" (100) 5225
B3090-24 4" (101.6) 169/16" (420.7) 4" (100) 6970
B3090-30 4" (101.6) 2011/16" (525.5) 4" (100) 8587
B3090-36 4" (101.6) 2311/16" (601.7) 4" (100) 9977

(406.0)
(505.7)
(645.5)

(837.3)
(1176.2)
(1281.4)
(2196.8)
(2370.0)
(3161.6)
(3895.0)
(4525.5)

(not included).

Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3090DI - size.

3”

(80) ductile iron uses B3090-3

Not available for 36” (900) ductile iron pipe size

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

B-Line series Pipe Hangers & Supports

1

/2

133

Eaton

Pipe Supports, Guides, Shields & Saddles

B3095 - Pipe Saddle Support

Size Range: 11⁄2" (40mm)

Shields & Saddles

Supports, Guides,

Material:

Function:

Steel

Designed to support horizontal pipe from floor stanchion.

To complete floor stanchion, use with B3088 pipe stand.

Approvals:

Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 37 and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 36

Maximum Temperature: 750°F (399°C)

Finish:

Plain.

Contact customer service for alternative finishes and

materials.

Order By: Part

number and finish

Note: For vertical adjustment see Figure B3093 (pages 138 & 139)

thru 36"

(900mm)

pipe

Steel Size

Gussets on sizes

B3095-8 and larger.

E

B

C

A

bottom lip of support.

* Shank will fit into nominal
Schedule 40 pipe size 'D' of

Base Stand Figure B3088

A

Shank Length

B

Shank Diameter

C

Center of pipe to

(not included).

Pipe Size Max. O.D. of Pipe ABC

Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

B3095-1 1" (25) 15/16" (33.3) 3" (76.2)

B3095-11/4 11/4" (32) 111/16" (42.9) 3" (76.2)

B3095-11/2 11/2" (40) 115/16" (49.2) 3" (76.2)

B3095-2 2" (50) 23/8" (60.3) 3" (76.2)

3

/4" (19.0) 129/32" (48.4)

3

/4" (19.0) 25/64" (52.8)

3

/4" (19.0) 213/64" (55.9)

3

/4" (19.0) 27/16" (61.9)

B3095-21/2 21/2" (65) 27/8" (73.0) 4" (101.6) 15/16" (33.3) 29/16" (65.1)

B3095-3 3" (80) 31/2" (88.9) 4" (101.6) 15/16" (33.3) 3" (76.2)

1

B3095-31/2 31/2" (90) 4" (101.6) 4" (101.6) 15/16" (33.3) 3

4

" (82.5)

B3095-4 4" (100) 47/8" (123.8) 4" (101.6) 23/8" (60.3) 31/2" (88.9)

B3095-5 5" (125) 55/8" (142.9) 4" (101.6) 23/8" (60.3) 41/32" (102.4)

B3095-6 6" (150) 7" (177.8) 4" (101.6) 23/8" (60.3) 411/16" (119.1)
B3095-8 8" (200) 91/8" (231.8) 4" (101.6) 23/8" (60.3) 61/16" (154.0)

B3095-10 10" (250) 111/8" (282.6) 4" (101.6) 23/8" (60.3) 73/4" (196.8)
B3095-12 12" (300) 131/2" (342.9) 4" (101.6) 23/8" (60.3) 83/4" (222.2)

B3095-14 14" (350) 14" (355.6) 4" (101.6) 27/8" (72.9) 103/4" (273.0)

B3095-16 16" (400) 16" (406.4) 4" (101.6) 27/8" (72.9) 113/4" (298.4)

B3095-18 18" (450) 18" (457.2) 4" (101.6) 4" (101.6) 141/2" (368.3)

B3095-20 20" (500) 20" (508.0) 4" (101.6) 4" (101.6) 141/2" (368.3)

B3095-24 24" (600) 24" (609.6) 4" (101.6) 4" (101.6) 173/4" (450.8)

B3095-30 30" (750) 30" (762.0) 4" (101.6) 4" (101.6) 211/4" (539.7)

B3095-36 36" (900) 36" (914.4) 4" (101.6) 4" (101.6) 241/4" (615.9)

Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3095DI - size.

3”

(80) ductile iron uses B3095-3

Not available for 36” (900) ductile iron pipe size

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

1

/2

134

B-Line series Pipe Hangers & SupportsEaton

B3095 - Pipe Saddle Support cont.

Pipe Supports, Guides, Shields & Saddles

Steel Size

Gussets on sizes

B3095-8 and larger.

B

Note: For vertical adjustment see Figure B3093 (pages 138 & 139)

D * E Approx. Wt./100

Part No. in. (mm) in. (mm) Lbs. (kg)

B3095-1

B3095-11/4

B3095-11/2

B3095-2

3

/4" (20) 11/8" (28.6) 49 (22.2)

3

/4" (20) 17/16" (36.5) 81 (36.7)

3

/4" (20) 121/32" (42.0) 88 (39.9)

3

/4" (20) 21/16" (52.4) 94 (42.6)

B3095-21/2 11/2" (40) 21/2" (63.5) 167 (75.7)

B3095-3 11/2" (40) 31/32" (77.0) 176 (79.8)

B3095-31/2 11/2" (40) 37/16" (87.3) 188 (85.3)

B3095-4 21/2" (65) 41/4" (107.9) 364 (165.1)

B3095-5 21/2" (65) 413/16" (122.2) 381 (172.8)
B3095-6 21/2" (65) 61/16" (154.0) 534 (242.2)

B3095-8 21/2" (65) 715/16" (201.5) 796 (361.0)

B3095-10 21/2" (65) 95/8" (244.5) 914 (414.6)

B3095-12 21/2" (65) 1111/16" (296.9) 1068 (484.4)

B3095-14 3" (80) 121/8" (308.0) 1654 (750.2)

B3095-16 3" (80) 137/8" (352.4) 1817 (824.2)

B3095-18 4" (100) 1519/32" (396.1) 2798 (1269.2)

B3095-20 4" (100) 175/16" (439.7) 3018 (1368.9)

B3095-24 4" (100) 2025/32" (527.8) 3018 (1368.9)
B3095-30 4" (100) 26" (660.4) 7624 (3458.2)

B3095-36 4" (100) 313/16" (792.2) 8877 (4026.6)

E

C

A

bottom lip of support.

* Shank will fit into nominal
Schedule 40 pipe size 'D' of

Base Stand Figure B3088

A

Shank Length

B

Shank Diameter

C

Center of pipe to

(not included).

Supports, Guides,

Shields & Saddles

Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3095DI - size.

3”

(80) ductile iron uses B3095-3

Not available for 36” (900) ductile iron pipe size

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

B-Line series Pipe Hangers & Supports

1

/2

135

Eaton

Pipe Supports, Guides, Shields & Saddles

B3092 - Adjustable Pipe Saddle Support with Yoke

Size Range:3/4" (20mm) thru 36" (900mm) pipe

Material: Steel with cast iron reducer

Shields & Saddles

Supports, Guides,

Function: Designed to support horizontal pipe from floor

stanchion where vertical adjustment is required. U-bolt
and hex nuts are provided to hold pipe securely to saddle.
To complete floor stanchion, use with B3088T threaded
pipe stand.

Approvals: Conforms to Federal Specification
WW-H-171E & A-A-1192A, Type 38 and Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58, Type 37.

Finish: Plain. Contact customer service for alternative
finishes and materials.

Order By: Part number and finish

Notes: Order with B3088T (page 128) for complete

stanchion support.

(100) thru 12" (300) fits both steel and ductile iron pipe. For

4"
other ductile iron pipe sizes specify B3092DI - size. 3”
Ductile Iron uses B3092-31/2
Not available for 36” (900) ductile iron pipe size

(80)

E

U-Bolt Dia.

Steel Size

Gussets on sizes

B3092-8 and larger.

A

D

A

Schedule 40 Pipe Size

B

Center of pipe to

bottom of pipe reducer.

C

Center of pipe to

bottom lip of support.

D

Nominal pipe size of base stand -

Figure B3088T, not included.

E

U-Bolt Dia.

C

B

A B

Pipe Size Maximum Minimum Maximum

Part No.

B3092-3/4
B3092-1 1" (25) 13/8" (34.9)
B3092-11/4 11/4" (32) 111/16" (42.9)
B3092-11/2 11/2" (38) 2" (50.8)
B3092-2 2" (50) 27/16" (61.9)

in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

3

/4" (19) 13/8" (34.9)

3

/4" (19) 53/4" (146.0) 101/4" (260.3)

3

/4" (19) 529/32" (150.0) 1013/32" (264.3)

3

/4" (19) 65/64" (154.4) 1037/64" (268.7)

3

/4" (19) 61/4" (158.7) 103/4" (273.0)

3

/4" (19) 67/16" (163.5) 1015/16" (277.8)

B3092-21/2 21/2" (65) 27/8" (73.0) 11/2" (40) 67/8" (174.6) 113/8" (288.9)
B3092-3 3" (80) 31/2" (88.9) 11/2" (40) 73/16" (182.6) 1111/16" (296.9)
B3092-31/2 31/2" (90) 4" (101.6) 11/2" (40) 77/16" (188.9) 1115/16" (303.2)
B3092-4 4" (100) 47/8" (123.8) 21/2" (65) 713/16" (198.4) 125/16" (312.7)
B3092-5 5" (125) 55/8" (142.9) 21/2" (65) 89/32" (210.3) 1225/32" (324.6)
B3092-6 6" (150) 629/32" (175.4) 21/2" (65) 91/16" (230.2) 139/16" (344.5)
B3092-8 8" (200) 91/8" (231.8) 21/2" (65) 101/2" (266.7) 15" (381.0)
B3092-10 10" (250) 113/32" (281.8) 21/2" (65) 119/16" (293.7) 161/16" (408.0)
B3092-12 12" (300) 133/16" (334.9) 21/2" (65) 129/16" (319.1) 171/16" (433.4)
B3092-14 14" (350) 14" (355.6) 3" (80) 145/16" (363.5) 1813/16" (477.8)
B3092-16 16" (400) 16" (406.4) 3" (80) 155/16" (388.9) 1913/16" (503.2)
B3092-18 18" (450) 18" (457.2) 4" (100) 175/16" (439.7) 2113/16" (554.0)
B3092-20 20" (500) 20" (508.0) 4" (100) 185/16" (465.1) 2213/16" (579.4)
B3092-24 24" (600) 24" (609.6) 4" (100) 205/16" (515.9) 2413/16" (630.2)
B3092-30 30" (750) 30" (762.0) 4" (100) 247/16" (620.7) 2815/16" (735.0)
B3092-36 36" (900) 36" (914.4) 4" (100) 277/16" (696.9) 3115/16" (811.2)

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

136

B-Line series Pipe Hangers & SupportsEaton

Pipe Supports, Guides, Shields & Saddles

B3092 - Adjustable Pipe Saddle Support with Yoke cont.

Gussets on sizes

B3092-8 and larger.

CDESaddle Steel Size Approx. Wt./100

Part No.

B3092-3/4
B3092-1 25/32
B3092-11/4
B3092-11/2
B3092-2 211/16
B3092-21/2
B3092-3 37/16
B3092-31/2
B3092-4 41/4
B3092-5 49/16
B3092-6 51/2

in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kg)

2" (50.8) 11/2

" (54.8) 11/2

221/64

" (59.1) 11/2

21/2

" (63.5) 11/2

" (68.3) 11/2

31/8

" (79.4) 21/2

" (87.3) 21/2

311/16

" (93.7) 21/2

" (38)
" (38)
" (38)
" (38)
" (38)
" (65)
" (65)
" (65)

" (107.9) 3" (80)

" (115.9) 3" (80)

" (139.7) 3" (80)

B3092-8 7" (177.8) 3" (80)
B3092-10 8" (203.2) 3" (80)
B3092-12 93/16
B3092-14 109/16
B3092-16 119/16
B3092-18 139/16
B3092-20 149/16
B3092-24 169/16
B3092-30 2011/16
B3092-36 2311/16

" (233.4) 3" (80)

" (268.3) 4" (100)
" (293.7) 4" (100)
" (344.5) 6" (150) 1" (25.4)
" (369.9) 6" (150) 1" (25.4)
" (420.7) 6" (150) 1" (25.4) 1" x 5" (25.4 x 127.0) 9170 (4159.5)

" (525.5) 6" (150) 1" (25.4) 1" x 5" (25.4 x 127.0) 10787 (4893.0)
" (601.7) 6" (150) 1" (25.4) 1" x 5" (25.4 x 127.0) 12177 (5523.5)

U-Bolt Dia.

Steel Size

E

C

A

D

1

/4

" (6.4)

1

/4

" (6.4)

3

/8

" (9.5)

3

/8

" (9.5)

3

/8

" (9.5)

1

/2

" (12.7)

1

/2

" (12.7)

1

/2

" (12.7)

1

/2

" (12.7)

1

/2

" (12.7)

5

/8

" (15.9)

5

/8

" (15.9)

3

/4

" (19.0)

7

/8

" (22.2)

7

/8

" (22.2)

7

/8

" (22.2)

Schedule 40 Pipe Size

bottom of pipe reducer.

B

bottom lip of support.

Nominal pipe size of base

stand - Figure B3088T, not

1

/4

" x 11/2

1

/4

" x 11/2

1

/4

" x 2" (6.3 x 50.8) 289 (131.1)

1

/4

" x 2" (6.3 x 50.8) 306 (138.8)

1

/4

" x 2" (6.3 x 50.8) 326 (147.9)

1

/4

" x 3" (6.3 x 76.2) 651 (295.3)

1

/4

" x 3" (6.3 x 76.2) 716 (324.8)

1

/4

" x 3" (6.3 x 76.2) 717 (325.2)

3

/8

" x 31/2

3

/8

" x 31/2

1

/2

" x 31/2

1

/2

" x 31/2

1

/2

" x 31/2

1

/2

" x 31/2

5

/8

" x 4" (15.9 x 101.6) 3593 (1629.8)

5

/8

" x 4" (15.9 x 101.6) 3825 (1735.0)

3

/4

" x 5" (19.0 x 127.0) 7043 (3194.7)

3

/4

" x 5" (19.0 x 127.0) 7425 (3368.0)

A

B

Center of pipe to

C

Center of pipe to

D

included.

E

U-Bolt Dia.

" (6.3 x 38.1) 247 (112.0)
" (6.3 x 38.1) 257 (116.6)

" (9.5 x 88.9) 1286 (583.3)
" (9.5 x 88.9) 1321 (599.2)
" (12.7 x 88.9) 1595 (723.5)
" (12.7 x 88.9) 1815 (823.3)
" (12.7 x 88.9) 2123 (963.0)
" (12.7 x 88.9) 2546 (1154.8)

Supports, Guides,

Shields & Saddles

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

B-Line series Pipe Hangers & Supports

137

Eaton

Pipe Supports, Guides, Shields & Saddles

B3093 - Adjustable Pipe Saddle Support

Size Range: 1" (25mm) thru 36" (900mm) pipe

Material:

Shields & Saddles

Supports, Guides,

Function:

floor stanchion where vertical adjustment is required.
U-bolt and hex nuts are provided to hold pipe
securely to saddle. To complete floor stanchion, use
with B3088T threaded pipe stand.

Approvals:

WW-H-171E & A-A-1192A, Type 39 and
Manufacturers Standardization Society ANSI/MSS
SP-69 & SP-58, Type 38.

Finish:

finishes and materials.

Order By: Part

Note:

stanchion support.

Steel with cast iron reducer

Designed to support horizontal pipe from

Conforms to Federal Specification

Plain.

Contact customer service for alternative

number and finish

Order with B3088T (page 128) for complete

Gussets on sizes

B3093-8 and larger.

Steel Size

A

D

A

Schedule 40 Pipe Size

B

Center of pipe to

bottom of pipe reducer.

C

Center of pipe to

bottom lip of support.

D

Nominal pipe size of base stand -

Figure B3088T, not included.

C

B

Plain

AB C

Pipe Size Maximum Minimum Maximum

Part No.

B3093-1 1" (25) 15/16" (33.3)
B3093-11/4 11/4" (32) 111/16" (42.9)
B3093-11/2 11/2" (40) 129/32" (48.4)
B3093-2 2" (50) 23/8" (60.3)

in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

3

/4" (20) 521/32" (143.6) 105/32" (257.9) 129/32" (48.4)

3

/4" (20) 553/64" (148.0) 1021/64" (2262.3) 25/64" (52.8)

3

/4" (20) 6" (152.4) 101/2" (266.7) 21/4" (58.1)

3

/4" (20) 63/16" (157.2) 1011/16" (271.5) 27/16" (61.9)

B3093-21/2 21/2" (65) 27/8" (73.0) 11/2" (40) 65/16" (160.3) 1013/16" (274.6) 29/16" (65.1)
B3093-3 3" (80) 31/2" (88.9) 11/2" (40) 65/8" (168.3) 111/8" (282.6) 27/8" (73.0)
B3093-31/2 31/2" (90) 4" (101.6) 11/2" (40) 67/8" (174.6) 113/8" (288.9) 31/8" (79.4)
B3093-4 4" (100) 47/8" (123.8) 21/2" (65) 71/4" (184.1) 113/4" (298.4) 31/2" (88.9)
B3093-5 5" (125) 59/16" (141.3) 21/2" (65) 725/32" (197.6) 129/32" (311.9) 41/32" (102.4)
B3093-6 6" (150) 7" (177.8) 21/2" (65) 87/16" (214.3) 1215/16" (328.6) 411/16" (119.1)
B3093-8 8" (200) 91/8" (231.8) 21/2" (65) 101/4" (260.3) 143/4" (374.6) 61/2" (165.1)
B3093-10 10" (250) 111/8" (282.6) 21/2" (65) 115/16" (287.3) 1513/16" (401.6) 79/16" (192.1)
B3093-12 12" (300) 131/2" (342.9) 21/2" (65) 121/8" (308.0) 165/8" (422.3) 83/8" (212.7)
B3093-14 14" (350) 14" (355.6) 3" (80) 141/2" (368.3) 19" (482.6) 103/4" (273.0)
B3093-16 16" (400) 16" (406.4) 3" (80) 151/2" (393.7) 20" (508.0) 113/4" (298.4)
B3093-18 18" (450) 18" (457.2) 4" (100) 171/4" (438.1) 213/4" (552.4) 131/2" (342.9)
B3093-20 20" (500) 20" (508.0) 4" (100) 181/4" (463.5) 223/4" (577.8) 141/2" (368.3)
B3093-24 24" (600) 24" (609.6) 4" (100) 211/2" (546.1) 26" (660.4) 173/4" (450.8)
B3093-30 30" (750) 30" (762.0) 4" (100) 245/8" (625.5) 291/8" (739.8) 207/8" (530.2)
B3093-36 36" (900) 36" (914.4) 4" (100) 275/8" (701.7) 321/8" (816.0) 237/8" (606.4)

Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3093DI - size.

3”

(80) ductile iron uses B3093-3

Not available for 36” (900) ductile iron pipe size

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

1

/2

138

B-Line series Pipe Hangers & SupportsEaton

Pipe Supports, Guides, Shields & Saddles

B3093 - Adjustable Pipe Saddle Support cont.

Electro-Galvanized

D Saddle Steel Size Complete Saddle Only

Part No.

in. (mm) in. (mm) Lbs. (kg) Lbs. (kg)

B3093-1 11/2" (40)
B3093-11/4 11/2" (40)
B3093-11/2 11/2" (40)
B3093-2 11/2" (40)
B3093-21/2 21/2" (65)
B3093-3 21/2" (65)
B3093-31/2 21/2" (65)
B3093-4 3" (80)
B3093-5 3" (80)
B3093-6 3" (80)
B3093-8 3" (80)
B3093-10 3" (80)
B3093-12 3" (80)
B3093-14 4" (100)
B3093-16 4" (100)
B3093-18 6" (150)
B3093-20 6" (150)
B3093-24 6" (150)
B3093-30 6" (150)
B3093-36 6" (150)

Schedule 40 Pipe Size

bottom of pipe reducer.

bottom lip of support.

Nominal pipe size of base
stand - Figure B3088T, not

A

B

Center of pipe to

C

Center of pipe to

D

included.

Steel Size

Gussets on sizes

B3093-8 and larger.

A

D

Approx. Wt./100

1

/4

" x 13/4

" (6.3 x 44.4) 189 (85.7) 49 (22.2)

1

/4

" x 13/4

" (6.3 x 44.4) 221 (100.2) 81 (36.7)

1

/4

" x 13/4

" (6.3 x 44.4) 228 (103.4) 88 (39.9)

1

/4

" x 13/4

" (6.3 x 44.4) 234 (106.1) 94 (42.6)

1

/4

" x 3" (6.3 x 76.2) 567 (257.2) 167 (75.8)

1

/4

" x 3" (6.3 x 76.2) 576 (261.3) 176 (79.9)

1

/4

" x 3" (6.3 x 76.2) 588 (266.7) 188 (85.3)

1

/4

" x 4" (6.3 x 101.6) 1064 (482.6) 364 (165.1)

1

/4

" x 4" (6.3 x 101.6) 1081 (490.3) 381 (172.8)

3

/8

" x 4" (9.5 x 101.6) 1234 (559.7) 534 (242.2)

3

/8

" x 4" (9.5 x 101.6) 1496 (678.6)

3

/8

" x 4" (9.5 x 101.6) 1614 (732.1)

3

/8

" x 4" (9.5 x 101.6) 1768 (801.9) 1068 (484.4)

3

/8

" x 5" (9.5 x 127.0) 2654 (1203.8) 1654 (750.2)

3

/8

" x 5" (9.5 x 127.0) 2817 (1277.8) 1817 (824.2)

1

/2"

x 5" (12.7 x 127.0) 4998 (2267.1) 2798 (1269.1)

1

/2"

x 5" (12.7 x 127.0) 5218 (2366.8) 3018 (1368.9)

1

/2"

x 6" (12.7 x 152.4) 6346 (2878.5) 4146 (1880.6)

796 (361.1)
914 (414.6)

1" x 6" (25.4 x 152.4) 9824 (4456.1) 7624 (3458.2)
1" x 6" (25.4 x 152.4) 11077 (5024.4) 8877 (4026.5)

Supports, Guides,

C

B

Shields & Saddles

Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3093DI - size.

3”

(80) ductile iron uses B3093-3

Not available for 36” (900) ductile iron pipe size

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

B-Line series Pipe Hangers & Supports

1

/2

139

Eaton